ZAXiS dash-5 production-class excavators ZX870lc kw (532 hp)
|
|
- Laurel Poole
- 5 years ago
- Views:
Transcription
1 ZAXIS DASH-5 production-class EXCAVATORS ZX870LC kw (532 hp)
2 ZX870LC-5 ZAXIS DASH-5 production-class EXCAVATORS Engine ZX870LC-5 Manufacturer and Mode Isuzu 6WG1-iT4 Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB Net Rated Power (ISO 9249) 397 kw (532 1,800 rpm Cyinders 6 Dispacement 15.7 L (957 cu. in.) Off-Leve Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooer Cooing Coo-on-demand hydrauic-driven, suction-type fan with remote-mounted drive Powertrain 2-speed prope with automatic shift Maximum Trave Speed Low 3.2 km/h (2 mph) High 4.7 km/h (2.9 mph) Drawbar Pu kg (126,193 b.) Hydrauics Open center, oad sensing Main Pumps 2 variabe-dispacement pumps Maximum Rated Fow 566 L/m (150 gpm) x 2 Piot Pump One gear Maximum Rated Fow 30 L/m (7.9 gpm) Pressure Setting 3900 kpa (566 psi) System Operating Pressure Circuits Impement Circuits kpa (4,627 psi) Trave Circuits kpa (4,975 psi) Swing Circuits kpa (4,264 psi) Power Boost kpa (4,975 psi) Contros Piot evers, short-stroke, ow-effort hydrauic piot contros with shutoff ever Cyinders Bore Rod Diameter Stroke (2) 215 mm (8.5 in.) 150 mm (5.9 in.) 1835 mm (72.2 in.) Arm (1) 225 mm (8.9 in.) 160 mm (6.3 in.) 2225 mm (87.6 in.) Bucket (1) 200 mm (7.9 in.) 140 mm (5.5 in.) 1555 mm (61.2 in.) Eectrica Number of Batteries (12 vot) 2 Battery Capacity 500 CCA Aternator Rating 50 amp Work Lights 5 haogen (1 mounted on frame, 2 mounted on boom, and 2 mounted on top of cab) Undercarriage Roers (each side) Carrier 3 Track 9 Shoes, Doube Bar Grousers (each side) 51 Track Adjustment Hydrauic Guides Front and center Chain Seaed and ubricated Ground Pressure 700-mm (28 in.) Doube Bar Grouser Shoes kpa (15.5 psi) 800-mm (32 in.) Doube Bar Grouser Shoes 94.5 kpa (13.7 psi) 900-mm (36 in.) Doube Bar Grouser Shoes 84.8 kpa (12.3 psi) Swing Mechanism Swing Speed 7.8 rpm Swing Torque Nm (196,929 b.-ft.) 2
3 DASH-5 Serviceabiity Refi Capacities Fue Tank 1110 L (293 ga.) Cooing System 112 L (29.6 ga.) Engine Oi with Fiter 57 L (15.1 ga.) Hydrauic Tank 500 L (132.1 ga.) Hydrauic System 1042 L (275.3 ga.) Gearbox Swing (each) 15 L (15.9 qt.) Trave (each) 19 L (20.1 qt.) Pump Drive 6.2 L (6.6 qt.) Operating Weights With fu fue tank; 79-kg (175 b.) operator; 3.49-m 3 (4.57 cu. yd.), 1370-mm (54 in.), 3558-kg (7,845 b.) bucket; 4.4-m (14 ft. 5 in.) arm; kg (29,321 b.) counterweight; and 900-mm (36 in.) doube-bar grouser shoes SAE Operating Weight kg (193,255 b.) Optiona Components Undercarriage w/ Doube Bar Grouser Shoes 650 mm (26 in.) kg (71,320 b.) 750 mm (30 in.) kg (72,863 b.) 900 mm (36 in.) kg (74,935 b.) One-Piece (with arm cyinder) 8.4 m (27 ft. 7 in.) 8200 kg (18,078 b.) 7.1-m (23 ft. 4 in.) Mass Excavating 7670 kg (16,909 b.) 10 m (32 ft. 10 in.) 9390 kg (20,701 b.) Arm with Bucket Cyinder and Linkage 3.7 m (12 ft. 1 in.) 4330 kg (9,546 b.) 4.4 m (14 ft. 5 in.) 4660 kg (10,274 b.) 5.4 m (17 ft. 9 in.) 4950 kg (10,913 b.) 2.95-m (9 ft. 8 in.) with 7.1-m (23 ft. 4 in.) Mass-Excavating 4650 kg (10,251 b.) -Lift Cyinders (2), Tota Weight 1700 kg (3,748 b.) 3.49-m 3 (4.57 cu. yd.), 1370-mm (54 in.) Heavy-Duty High-Capacity Bucket 3558 kg (7,844 b.) C B D B' F GROUND LINE A' A E CENTERLINE OF SWING Operating Dimensions Arm 3.7 m (12 ft. 2 in.) w/ 8.4-m (27 ft. 7 in.) 4.4 m (14 ft. 5 in.) w/ 8.4-m (27 ft. 7 in.) 5.4 m (17 ft. 9 in.) w/ 8.4-m (27 ft. 7 in.) 2.95-m (9 ft. 8 in.) w/ 7.1-m (23 ft. 4 in.) Mass-Excavating 4.4-m (14 ft. 5 in.) w/ 10-m (32 ft. 10 in.) 5.4-m (17 ft. 9 in.) w/ 10-m (32 ft. 10 in.) Arm Digging Force SAE 315 kn (70,815 b.) 273 kn (61,373 b.) 237 kn (53,280 b.) 378 kn (84,978 b.) 273 kn (61,373 b.) 237 kn (53,280 b.) ISO 323 kn (72,613 b.) 280 kn (62,946 b.) 243 kn (54,629 b.) 394 kn (88,575 b.) 280 kn (62,946 b.) 243 kn (54,629 b.) Bucket Digging Force SAE 359 kn (80,706 b.) 359 kn (80,706 b.) 289 kn (64,970 b.) 411 kn (92,396 b.) 359 kn (80,706 b.) 289 kn (64,970 b.) ISO 399 kn (89,699 b.) 399 kn (89,699 b.) 323 kn (72,613 b.) 472 kn (106,110 b.) 399 kn (89,699 b.) 323 kn (72,613 b.) A Maximum Reach m (46 ft. 3 in.) m (48 ft. 11 in.) m (52 ft. 2 in.) m (40 ft. 6 in.) m (54 ft. 4 in.) m (57 ft. 7 in.) A Maximum Reach at Ground Leve m (45 ft. 4 in.) m (48 ft.) m (51 ft. 5 in.) m (39 ft. 5 in.) m (53 ft. 7 in.) m (56 ft. 11 in.) B Maximum Digging Depth 8.87 m (29 ft. 1 in.) 9.57 m (31 ft. 5 in.) m (34 ft. 8 in.) 7.14 m (23 ft. 5 in.) m (36 ft. 7 in.) m (39 ft. 11 in.) B Maximum Digging Depth at 2.44-m (8 ft.) Fat Bottom 8.74 m (28 ft. 8 in.) 9.46 m (31 ft.) m (34 ft. 4 in.) 7 m (23 ft.) m (36 ft. 3 in.) m (39 ft. 7 in.) C Maximum Cutting m (42 ft. 9 in.) m (45 ft. 4 in.) m (47 ft. 8 in.) m (39 ft. 5 in.) m (48 ft. 1 in.) m (50 ft. 4 in.) D Maximum Dumping 9.08 m (29 ft. 9 in.) 9.73 m (31 ft. 11 in.) m (34 ft. 2 in.) 8.13 m (26 ft. 8 in.) m (35 ft. 6 in.) m (36 ft. 11 in.) E Minimum Swing Radius 5.95 m (19 ft. 6 in.) 5.94 m (19 ft. 6 in.) 5.94 m (19 ft. 6 in.) 5.21 m (17 ft. 1 in.) 7.35 m (24 ft. 1 in.) 7.32 m (24 ft.) F Maximum Vertica Wa 7.17 m (23 ft. 6 in.) 8.48 m (27 ft. 10 in.) 9.75 m (32 ft.) 4.10 m (13 ft. 5 in.) 9.87 m (32 ft. 5 in.) m (37 ft. 2 in.) 3
4 ZX870LC-5 ZAXIS DASH-5 production-class EXCAVATORS Machine Dimensions ZX870LC-5 A Overa w/ Arm 3.7 m (12 ft. 2 in.) m (48 ft. 10 in.) 4.4 m (14 ft. 5 in.) m (48 ft. 7 in.) 5.4 m (17 ft. 9 in.) m (48 ft. 1 in.) 2.95-m (9 ft. 8 in.) Mass Excavating with Mass-Excavating m (44 ft. 5 in.) B Overa w/ Arm 3.7 m (12 ft. 2 in.) 4.77 m (15 ft. 8 in.) 4.4 m (14 ft. 5 in.) 5.13 m (16 ft. 10 in.) 5.4 m (17 ft. 9 in.) 5.76 m (18 ft. 11 in.) 2.95-m (9 ft. 8 in.) Mass Excavating with Mass-Excavating 5.20 m (17 ft. 1 in.) C Rear-End /Swing Radius 4.54 m (14 ft. 11 in.) D Distance Between Ider/Sprocket Centerine 5.11 m (16 ft. 9 in.) E Undercarriage 6.36 m (20 ft. 10 in.) F Counterweight Cearance 1.68 m (5 ft. 6 in.) G Upperstructure Width 4.12 m (13 ft. 6 in.) H Cab 3.69 m (12 ft. 1 in.) I Track Width w/ Doube Bar Grouser Shoes 650 mm (26 in.) / 750 mm (30 in.) / 900 mm (36 in.) J Gauge Width Operating Position 3.45 m (11 ft. 4 in.) Transport Position 2.83 m (9 ft. 3 in.) K Ground Cearance 0.89 m (35 in.) L Overa Width w/ 900-mm (36 in.) Doube Bar Grouser Shoes Operating Position 4.35 m (14 ft. 3 in.) Transport Position 3.73 m (12 ft. 3 in.) G C B H I J L K A D E F 4
5 DASH-5 Operating Dimensions Base Machine (without front attachment and side frame)* 6.04 m (19 ft. 10 in.) 3.49 m (11 ft. 5 in.) Overa Width 3.39 m (11 ft. 1 in.) Weight kg (60,407 b.) Side Frame** 650-mm (26 in.) Shoe Width 6.36 m (20 ft. 10 in.) 1.50 m (4 ft. 11 in.) 1.30 m (4 ft. 3 in.) kg (26,676 b.) 750-mm (30 in.) Shoe Width 6.36 m (20 ft. 10 in.) 1.50 m (4 ft. 11 in.) 1.33 m (4 ft. 4 in.) kg (27,558 b.) 900-mm (36 in.) Shoe Width 6.36 m (20 ft. 10 in.) 1.50 m (4 ft. 11 in.) 1.43 m (4 ft. 8 in.) kg (28,418 b.) 1020-mm (40 in.) Shoe Width 6.36 m (20 ft. 10 in.) 1.50 m (4 ft. 11 in.) 1.45 m (4 ft. 9 in.) kg (29,366 b.) Counterweight, Standard 3.36 m (11 ft.) 1.62 m (5 ft. 4 in.) 0.72 m (28 in.) kg (29,321 b.) 7.1 m (23 ft.4 in.) 7.49 m (24 ft. 7 in.) 2.70 m (8 ft. 10 in.) 1.45 m (4 ft. 9 in.) 7670 kg (16,909 b.) 8.4 m (27 ft. 7 in.) 8.78 m (28 ft. 10 in.) 2.50 m (8 ft. 2 in.) 1.45 m (4 ft. 9 in.) 8200 kg (18,078 b.) 10 m (32 ft. 10 in.) m (34 ft.) 2.70 m (8 ft. 10 in.) 1.45 m (4 ft. 9 in.) 9390 kg (20,701 b.) Arm 2.95 m (9 ft. 8 in.) 4.46 m (14 ft. 8 in.) 1.66 m (5 ft. 5 in.) 0.85 m (33 in.) 4650 kg (10,251 b.) 3.7 m (12 ft. 2 in.) 5.29 m (17 ft. 4 in.) 1.42 m (4 ft. 8 in.) 0.82 m (32 in.) 4330 kg (9,546 b.) 4.4 m (14 ft. 5 in.) 5.88 m (19 ft. 3 in.) 1.42 m (4 ft. 8 in.) 0.82 m (32 in.) 4660 kg (10,274 b.) 5.4 m (17 ft. 9 in.) 6.83 m (22 ft. 5 in.) 1.48 m (4 ft. 10 in.) 0.80 m (31 in.) 4950 kg (10,913 b.) Less Arm and Counterweight 7.08 m (23 ft. 3 in.) 4.41 m (14 ft. 6 in.) / 3.39 m (11 ft. 1 in.) without exhaust stack 3.60 m (11 ft. 10 in.) kg (114,199 b.) with 650-mm (26 in.) shoes / kg (115,743 b.) with 750-mm (30 in.) shoes *Steps on the track frame and the side hydrauic oi tank, handrais on the upper battery box, upper fue tank, and the side hydrauic oi tank must be removed to compy with the overa width dimensions above. **The dimensions and the weights indicate those of one side frame. Base Machine Less Counterweight and Arm Arm Side Frame Counterweight 5
6 ZX870LC-5 ZAXIS DASH-5 production-class EXCAVATORS Lift Charts Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) 9.0 m (30 ft.) 10.5 m (35 ft.) 12.0 m (40 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.9-m 3 (3.79 cu. yd.) bucket, 4.4-m (14 ft. 5 in.) arm, 8.4-m (27 ft. 7 in.) boom, and 650-mm (26 in.) doube bar grouser shoes 9.0 m (30 ft.) (19,446) (19,446) 7.5 m (25 ft.) (29,445) (29,445) (26,635) (26,635) 6.0 m (20 ft.) (36,623) (36,623) (32,179) (32,179) (29,365) (26,246) 9301 (16,454) 9288 (16,454) 4.5 m (15 ft.) (54,124) (54,124) (42,254) (42,254) (35,518) (33,378) (31,321) (25,362) (23,411) 9110 (19,434) 3.0 m (10 ft.) (63,589) (60,425) (47,813) (42,693) (38,942) (31,795) (33,396) (24,389) (27,728) 8875 (18,968) 1.5 m (5 ft.) (69,872) (57,214) (52,236) (40,574) (41,869) (30,416) (35,217) (23,508) (29,651) 8631 (18,483) Ground Line (68,029) (55,531) (54,873) (39,155) (43,815) (29,394) (36,393) 1.5 m ( 5 ft.) , (37,551) (37,551) (72,025) (54,895) (55,505) (38,407) (44,412) (28,791) (36,123) 3.0 m ( 10 ft.) (37,406) (37,406) (57,056) (57,056) (69,029) (54,968) (53,997) (38,243) (43,253) (28,633) (34,820) 4.5 m ( 15 ft.) (57,577) (57,577) (81,680) (81,680) (63,219) (55,642) (49,890) (38,630) (39,501) (28,987) 6.0 m ( 20 ft.) (68,104) (68,104) (53,446) (53,446) (41,734) (39,695) With 4.5-m 3 (5.89 cu. yd.) bucket, 2.95-m (9 ft. 8 in.) BE arm, 7.1-m (23 ft. 4 in.) BE boom, and 650-mm (26 in.) doube bar grouser shoes 7.5 m (25 ft.) (40,535) (40,535) 6.0 m (20 ft.) (51,762) (51,762) (43,741) (43,741) (39,197) (32,640) 4.5 m (15 ft.) (60,565) (60,565) (48,083) (44,569) (41,121) (32,000) 3.0 m (10 ft.) (68,676) (61,194) (52,446) (42,457) (43,285) (30,974) 1.5 m (5 ft.) (73,303) (58,454) (55,503) (40,722) (44,705) (29,963) Ground Line , (73,723) (57,025) (56,274) (39,600) (44,450) (29,293) 1.5 m ( 5 ft.) (86,602) (86,602) (70,176) (56,585) (53,930) (39,155) 3.0 m ( 10 ft.) (84,432) (84,432) (80,338) (80,338) (61,986) (56,992) (46,554) (39,521) With 2.9-m 3 (3.79 cu. yd.) bucket, 4.4-m (14 ft. 5 in.) arm, 8.4-m (27 ft. 7 in.) boom, and 750-mm (30 in.) doube bar grouser shoes 9.0 m (30 ft.) (19,446) 7.5 m (25 ft.) (29,445) (29,445) (26,635) 6.0 m (20 ft.) (36,623) (36,623) (32,179) (32,179) (29,365) 4.5 m (15 ft.) (54,124) (54,124) (42,254) (42,254) (35,518) (33,681) (31,321) 3.0 m (10 ft.) (63,589) (60,945) (47,813) (43,076) (38,942) (32,097) (33,396) 1.5 m (5 ft.) (69,872) (57,734) (52,236) (40,957) (41,869) (30,718) (35,217) Ground Line (68,029) (56,051) (54,873) (39,537) (43,815) (29,696) (36,393) 1.5 m ( 5 ft.) (37,551) (37,551) (72,025) (55,415) (55,505) (38,790) (44,412) (29,094) (36,496) 3.0 m ( 10 ft.) (37,406) (37,406) (57,056) (57,056) (69,029) (55,489) (53,997) (38,625) (43,253) (28,936) (34,820) 4.5 m ( 15 ft.) (57,577) (57,577) (81,680) 6.0 m ( 20 ft.) (68,104) (81,680) (68,104) (63,219) (53,446) (56,162) (53,446) (49,890) (41,734) (39,012) (40,078) (39,501) (29,289) (22,832) (22,446) (22,447) (19,446) (26,635) (26,496) (25,612) (24,639) (23,758) (23,082) (22,696) (22,697) (26,766) 9301 (16,454) (23,411) (27,728) (29,651) (26,766) 8454 (18,128) 9301 (16,454) 9209 (19,647) 8974 (19,181) 8730 (18,697) 8552 (18,341) 6
7 DASH-5 Lift Charts Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) 9.0 m (30 ft.) 10.5 m (35 ft.) 12.0 m (40 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 3.5-m 3 (4.58 cu. yd.) bucket, 3.7-m (12 ft. 2 in.) arm, 8.4-m (27 ft. 7 in.) boom, and 900-mm (36 in.) doube bar grouser shoes 9.0 m (30 ft.) (30,445) (30,445) 7.5 m (25 ft.) (31,872) (31,872) (25,048) (25,048) 6.0 m (20 ft.) (48,972) (48,972) (39,742) (39,742) (34,438) (34,438) (31,213) (26,116) 4.5 m (15 ft.) (59,131) (59,131) (45,194) (45,132) (37,560) (33,384) (32,927) (25,416) 3.0 m (10 ft.) (67,721) (60,141) (50,308) (42,764) (40,667) (31,963) (34,698) (24,576) 1.5 m (5 ft.) (61,704) (57,717) (53,998) (40,974) (43,142) (30,777) (36,137) (23,838) Ground Line (69,892) (56,704) (55,722) (39,887) (44,499) (29,959) (36,789) (23,320) 1.5 m ( 5 ft.) (42,711) (42,711) (70,992) (56,510) (55,356) (39,429) (44,342) (29,561) (36,067) 3.0 m ( 10 ft.) (46,802) (46,802) (69,025) (69,025) (66,644) (56,882) (52,716) (39,513) (42,114) (29,620) 4.5 m ( 15 ft.) (74,510) (74,510) (59,278) (57,812) (47,044) (40,158) (36,205) (30,306) 6.0 m ( 20 ft.) (58,692) (58,692) (46,986) (46,986) (35,451) (35,451) With 2.9-m 3 (3.79 cu. yd.) bucket, 4.4-m (14 ft. 5 in.) arm, 8.4-m (27 ft. 7 in.) boom, and 650-mm (26 in.) doube bar grouser shoes 9.0 m (30 ft.) (19,500) 7.5 m (25 ft.) (29,500) (29,500) (26,600) 6.0 m (20 ft.) (36,600) (36,600) (32,200) (32,200) (29,400) 4.5 m (15 ft.) (54,100) (54,100) (42,300) (42,300) (35,500) (34,100) (31,300) 3.0 m (10 ft.) , (63,600) (61,600) (47,800) (43,600) (38,900) (32,500) (33,400) 1.5 m (5 ft.) (69,900) (58,400) (52,200) (41,500) (41,900) (31,100) (35,200) Ground Line (68,000) (56,700) (54,900) (40,000) (43,800) (30,100) (36,400) 1.5 m ( 5 ft.) (37,600) (37,600) (72,000) (56,100) (55,500) (39,300) (44,400) (29,500) (36,500) 3.0 m ( 10 ft.) (37,400) (37,400) (57,100) (57,100) (69,000) (56,200) (54,000) (39,100) (43,300) (29,300) (34,800) 4.5 m ( 15 ft.) (57,600) (57,600) (81,700) (81,700) 6.0 m ( 20 ft.) (68,100) (63,200) (53,500) (56,800) (53,500) (49,900) (41,700) (39,500) (40,600) (39,500) (29,700) (23,121) (19,500) (26,600) (26,800) (25,900) (25,000) (24,100) (23,400) (23,000) (23,000) 9300 (16,500) (23,400) (27,700) (29,700) (26,800) 9300 (16,500) 9340 (19,900) 9100 (19,500) 8860 (19,000) 8680 (18,600) 7
8 ZX870LC-5 ZAXIS DASH-5 production-class EXCAVATORS Lift Charts Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) 9.0 m (30 ft.) 10.5 m (35 ft.) 12.0 m (40 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.3-m 3 (3.01 cu. yd.) bucket, 5.4-m (17 ft. 9 in.) arm, 8.4-m (27 ft. 7 in.) boom, and 900-mm (36 in.) doube bar grouser shoes 10.5 m (35 ft.) 7903 (15,908) 7903 (15,908) 9.0 m (30 ft.) 9196 (19,732) 9196 (19,732) 7.5 m (25 ft.) (22,077) (22,077) 8357 (16,961) 8357 (16,961) 6.0 m (20 ft.) (26,696) (26,696) (25,213) (25,213) 9883 (20,706) 9874 (20,706) 4.5 m (15 ft.) (46,511) (46,511) (37,484) (37,484) (32,105) (32,105) (28,625) (26,584) (24,148) 3.0 m (10 ft.) (56,876) (56,876) (43,569) (43,569) (35,917) (33,241) (31,053) (25,443) (27,780) 9256 (19,809) 1.5 m (5 ft.) (65,115) (59,768) (48,895) (42,253) (39,412) (31,589) (33,332) (24,366) (29,154) 8933 (19,129) Ground Line (25,354) (25,354) (70,031) (57,082) (52,707) (40,333) (42,109) (30,265) (35,117) (23,472) (30,030) 8665 (18,566) 1.5 m ( 5 ft.) 7899 (17,940) 7899 (17,940) (34,998) (34,998) (71,775) (55,694) (54,665) (39,131) (43,646) (29,359) (36,069) (22,847) (29,646) 8488 (18,207) 3.0 m ( 10 ft.) (30,695) (30,695) (48,564) (48,564) (70,773) (55,236) (54,631) (38,577) 4.5 m ( 15 ft.) (45,551) (45,551) (66,831) (66,831) (67,079) (55,491) (52,358) (38,603) 6.0 m ( 20 ft.) (64,353) (64,353) (78,801) (78,801) (60,141) (56,416) (47,140) (39,221) 7.5 m ( 25 ft.) (62,632) (62,632) (48,305) (48,305) (36,855) (36,855) With 4.5-m 3 (5.89 cu. yd.) bucket, 2.95-m (9 ft. 8 in.) BE arm, 7.1-m (23 ft. 4 in.) BE boom, and 900-mm (36 in.) doube bar grouser shoes 7.5 m (25 ft.) (40,535) (40,535) 6.0 m (20 ft.) (51,762) (51,762) (43,741) (43,741) 4.5 m (15 ft.) (60,565) (60,565) (48,083) (45,447) 3.0 m (10 ft.) (68,676) (62,388) (52,446) (43,335) 1.5 m (5 ft.) (73,303) (59,648) (55,503) (41,600) Ground Line (73,723) (58,218) (56,274) (40,477) 1.5 m ( 5 ft.) (86,602) (86,602) (70,176) (57,779) (53,930) (40,033) 3.0 m ( 10 ft.) (84,432) (84,432) (80,338) (80,338) (61,986) (58,186) (46,554) (40,399) 4.5 m ( 15 ft.) (60,462) (60,462) (45,368) (45,368) (43,708) (41,837) (36,943) (39,197) (41,121) (43,285) (44,705) (44,450) (28,899) (28,906) (29,481) (33,334) (32,694) (31,668) (30,657) (29,987) (35,780) (33,479) (22,555) (22,689) (23,915) 8449 (18,173) 8
9 DASH-5 Lift Charts Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) 9.0 m (30 ft.) 10.5 m (35 ft.) 12.0 m (40 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2-m 3 (2.63 cu. yd.) bucket, 4.4-m (14 ft. 5 in.) arm, 10-m (32 ft. 10 in.) boom, and 900-mm (36 in.) doube bar grouser shoes 9.0 m (30 ft.) (22,132) (22,132) 9756 (21,446) 9756 (21,283) 7.5 m (25 ft.) (23,662) (23,662) (22,105) 9810 (20,957) 6.0 m (20 ft.) (35,416) (35,416) (29,377) (29,377) (25,670) (25,670) (23,319) 9483 (20,312) 4.5 m (15 ft.) (41,259) (41,259) (32,945) (32,099) (27,955) (24,832) (24,750) 9083 (19,473) 3.0 m (10 ft.) (46,412) (39,516) (36,327) (30,155) (30,219) (23,547) (26,236) 8686 (18,631) 1.5 m (5 ft.) (49,966) (37,469) (39,061) (28,616) (32,178) (22,456) (27,568) 8338 (17,886) Ground Line (51,762) (36,337) (40,872) (27,567) (33,604) (21,642) (28,545) 8070 (17,314) 1.5 m ( 5 ft.) (31,421) (31,421) (52,075) (35,861) (41,656) (26,983) (34,317) 9839 (21,143) (28,378) 7905 (16,969) 3.0 m ( 10 ft.) (27,635) (27,635) (48,643) (48,643) (51,101) (35,853) (41,349) (26,809) (34,134) 9756 (20,971) (28,313) 7865 (16,908) 4.5 m ( 15 ft.) (34,672) (34,672) (46,108) (46,108) (60,593) (52,631) (48,786) (36,239) (39,781) (27,018) (32,732) 9830 (21,158) (26,419) 6.0 m ( 20 ft.) (52,949) (52,949) (68,530) (68,530) (55,119) (53,772) (44,755) (37,042) (36,475) (27,657) (29,212) (21,846) 7.5 m ( 25 ft.) (57,739) (57,739) (46,867) (46,867) (38,010) (38,010) (29,895) (28,975) With 1.9-m 3 (2.48 cu. yd.) bucket, 5.4-m (17 ft. 9 in.) arm, 10-m (32 ft. 10 in.) boom, and 900-mm (36 in.) doube bar grouser shoes 9.0 m (30 ft.) 8717 (19,090) 7.5 m (25 ft.) (21,398) (21,398) (20,090) 6.0 m (20 ft.) (26,649) (26,649) (23,559) (23,559) (21,494) 4.5 m (15 ft.) (37,340) (37,340) (30,365) (30,365) (26,017) (25,866) (23,130) 3.0 m (10 ft.) (42,948) (41,424) (34,036) (31,400) (28,512) (24,419) (24,838) 1.5 m (5 ft.) (47,391) (38,713) (37,224) (29,529) (30,782) (23,125) (26,435) Ground Line (22,849) (36,945) (40,435) (28,131) (39,622) (22,091) (32,606) 1.5 m ( 5 ft.) (31,212) (31,212) (51,669) (35,977) (41,078) (27,228) (33,810) (21,368) (28,555) 3.0 m ( 10 ft.) (24,721) (24,721) (42,934) (42,934) (51,712) (35,613) (41,521) (26,778) (34,245) (20,975) (28,263) 4.5 m ( 15 ft.) (27,934) (27,934) (37,876) (37,876) (58,533) (51,509) (50,442) (35,729) (40,845) (26,738) (33,711) (20,922) (28,068) 6.0 m ( 20 ft.) (41,299) (41,299) (53,952) (53,952) (59,688) (52,460) (47,677) (36,283) (38,788) (27,105) (31,805) (21,255) (25,492) 7.5 m ( 25 ft.) (57,797) (57,797) (67,916) 9.0 m ( 30 ft.) (54,676) (67,916) (54,676) (53,324) (43,483) (53,324) (43,483) (42,882) (34,644) (37,325) (34,644) (34,683) (26,223) (27,960) (26,223) (27,337) (22,163) 7999 (17,278) 8717 (19,090) 9221 (20,090) 9883 (21,173) 9437 (20,232) 8984 (19,267) 8568 (18,377) 8225 (17,641) 7979 (17,115) 7846 (16,843) 7847 (16,876) 8033 (17,363) 9
10 ZX870LC-5 ZAXIS DASH-5 production-class EXCAVATORS Lift Charts Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) 9.0 m (30 ft.) 10.5 m (35 ft.) 12.0 m (40 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2-m 3 (2.63 cu. yd.) bucket, 4-4-m (14 ft. 5 in.) arm, 10-m (32 ft. 10 in.) boom, and 1020-mm (40 in.) doube-bar grouser shoes 9.0 m (30 ft.) (22,131) (22,131) 9756 (21,445) 9756 (21,445) 7.5 m (25 ft.) (23,662) 6.0 m (20 ft.) (35,416) (35,416) (29,377) (29,377) (25,670) 4.5 m (15 ft.) (41,259) (41,259) (32,945) (32,443) (27,955) 3.0 m (10 ft.) (46,412) (39,951) (36,327) (30,499) (30,219) 1.5 m (5 ft.) (49,966) (37,903) (39,061) (28 959) (32,178) Ground Line (51,762) (36,772) (40,872) (27,910) (33,604) 1.5 m ( 5 ft.) (31,425) (31,425) (52,075) (36,296) (41,656) (27,326) (34,317) 3.0 m ( 10 ft.) (27,636) (27,636) (48,661) (48,661) (51,101) (36,288) (41,349) (27,152) (34,134) 4.5 m ( 15 ft.) (34,673) (34,673) (46,118) (46,118) (60,593) (53,222) (48,786) (36,674) (39,781) (27,362) (32,732) 6.0 m ( 20 ft.) (52,949) (52,949) (68,516) (68,516) (55,119) (54,363) (44,755) (37,477) (36,475) (28,000) (29,212) 7.5 m ( 25 ft.) (57,739) (57,739) (46,867) (46,867) (23,662) (25,670) (25,116) (23,832) (22,740) (21,927) 9970 (21,427) 9887 (21,255) 9961 (21,442) (22,130) (22,105) (23,319) (24,750) (26,236) (27,568) (28,545) (28,727) (28,514) (26,419) 9922 (21,199) 9595 (20,555) 9195 (19,715) 8798 (18,873) 8450 (18,129) 8182 (17,556) 8017 (17,211) 7977 (17,151) 8111 (17,521) Buckets A fu ine of buckets is offered to meet a wide variety of appications. Digging forces are with power boost. Buckets are equipped with ESCO teeth standard. Repaceabe cutting edges and a variety of teeth are avaiabe through Hitachi parts. Optiona side cutters add 150 mm (6 in.) to bucket widths. Capacities are SAE heaped ratings. Type Bucket Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force Arm Dig Force 4.4 m (14 ft. 5 in.) Arm Dig Force 5.4 m (17 ft. 9 in.) ME Arm Dig Force 2.95 m (9 ft. 8 in.) Bucket Tip Radius Number of Teeth mm in. m 3 cu. yd. kg b. kn b. kn b. kn b. kn b. mm in. Heavy-Duty High Capacity , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Heavy Capacity Dirt , , , , , Heavy-Duty , , , , , , , , , , , , , , , , , , , , , , , , , Truck Loading , , , , , , , , , , (38,010) (38,010) (29,895) (29,319) 10
11 DASH-5 Bucket Seection Guide* BUCKET SIZE m 3 (cu. yd.) 8.8 (11.5) 8.4 (11.0) 8.0 (10.5) 7.7 (10.0) 7.3 (9.5) 6.9 (9.0) 6.5 (8.5) 6.1 (8.0) 5.7 (7.5) 5.4 (7.0) 5.0 (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.1 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) 1.1 (1.5) Hitachi 5.4-m (17 ft. 9 in.) Arm with 10.0-m (32 ft. 10 in.) Hitachi 2.95-m (9 ft. 8 in.) Arm with 8.4-m (27 ft. 7 in.) Hitachi 3.7-m (12 ft. 2 in.) Arm with 8.4-m (27 ft. 7 in.) Hitachi 4.4-m (14 ft. 5 in.) Arm with 8.4-m (27 ft. 7 in.) Hitachi 4.4-m (14 ft. 5 in.) Arm with 10.0-m (32 ft. 10 in.) Hitachi 5.4-m (17 ft. 9 in.) Arm with 8.4-m (27 ft. 7 in.) b./cu. yd. 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,600 2,800 3,000 3,200 3,400 3,600 kg/m Wet Peat Topsoi Coa Caiche Shae Dry Sand Dry Cay Limestone Wet Earth Wet Cay, Granite Moist Sand * Contact your Hitachi deaer for optimum bucket and attachment seections. These recommendations are for genera conditions and average use. Does not incude optiona equipment such as thumbs or coupers. Larger buckets may be possibe when using ight materias, for fat and eve operations, ess compacted materias, and voume oading appications such as mass-excavation appications in idea conditions. Smaer buckets are recommended for adverse conditions such as off-eve appications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped. Wet Sand Wet Sand, Grave 11
12 DASH-5 Additiona equipment Key: Standard s Optiona or specia kit Engine Auto-ide system Batteries (2 12 vot), 280-min. reserve capacity Cooant recovery tank Dua-eement dry-type air fiter Eectronic engine contro Encosed fan guard (conforms to SAE J1308) Engine cooant to 37 deg. C ( 34 deg. F) Automatic bet-tension device Fue fiter with water separator Fu-fow oi fiter Turbocharger with charge air cooer Coo-on-demand hydrauic-driven fan Gow-pug start aid 500-hour engine-oi-change interva 70% (35 deg.) off-eve capabiity Hydrauic fan reverser Hydrauic System Reduced-drift vave for boom down, arm in Auxiiary hydrauic vave section Spring-appied, hydrauicay reeased automatic swing brake Auxiiary hydrauic-fow adjustments through monitor Auto power ift 4,000-hour hydrauic-oi-change interva s Auxiiary piot and eectric contros s Hydrauic fiter restriction indicator kit s Load-owering contro / Anti-drift device s Singe-peda prope contro s Pattern changer Undercarriage Panetary drive with axia piston motors Prope motor shieds Spring-appied, hydrauicay reeased automatic prope brake Track guides, front ider and center 2-speed prope with automatic shift Upper carrier roers (3) Seaed and ubricated track chain s Doube-bar grouser shoes, 650 mm (26 in.) s Doube-bar grouser shoes, 750 mm (30 in.) s Doube-bar grouser shoes, 900 mm (36 in.) s Doube-bar grouser shoes, 1020 mm (40 in.) Upperstructure Right- and eft-hand mirrors Vanda ocks with ignition key: Cab door / Fue cap / Service doors / Toobox Debris screen in side pane Remote mounted engine oi and fue fiters Service patform, eft side s Counterweight-remova system Front Attachments Centraized ubrication system Dirt seas on a bucket pins Lubricator with hose ree and grease gun No-boom-arm option s, 8.4 m (27 ft. 7 in.) s, mass excavating, 7.1 m (23 ft. 4 in.) s, reach, 10 m (32 ft. 10 in.) s Arm, mass excavating, 2.95 m (9 ft. 8 in.) s Arm, 3.7 m (12 ft. 2 in.) s Arm, 4.4 m (14 ft. 5 in.) s Arm, 5.4 m (17 ft. 9 in.) s cyinder with pumbing to mainframe for no-boom-arm option s Buckets: Heavy duty / Heavy-duty high capacity / Side cutters and teeth Operator s Station Adjustabe independent-contro positions (evers-to-seat, seat-to-pedas) AM/FM radio Auto cimate contro/air conditioner/heater/ pressurizer, 5.9 kw (20,000 Btu/hr.) Buit-in Operator s Manua storage compartment and manua Ce-phone power outet, 12 vot, 60 watt, 5 amp Coat hook Deuxe suspension coth seat with 100-mm (4 in.) adjustabe armrests Foor mat Front windshied wiper with intermittent speeds Gauges (iuminated): Engine cooant / Fue Horn, eectric Hour meter, eectric Hydrauic shutoff ever, a contros Hydrauic warm-up contro Interior ight s s s s s Operator s Station (continued) Large cup hoder Machine Information Center (MIC) Mode seectors (iuminated): Power modes (3) / Trave modes (2 with automatic shift) / Work mode (2) / mode Mutifunction, coor LCD monitor with: Diagnostic capabiity / Mutipe-anguage capabiities / Maintenance tracking / Cock / System monitoring with aarm features: Auto-ide indicator, engine air ceaner restriction indicator ight, engine check, engine cooant temperature indicator ight with audibe aarm, engine oi pressure indicator ight with audibe aarm, ow-aternator-charge indicator ight, ow-fue indicator ight, faut code aert indicator, fue-rate dispay, wiper-mode indicator, work-ights-on indicator, and work-mode indicator Fuid-eve switch and indicator ight for engine cooant and engine oi Motion aarm with cance switch (conforms to SAE J994) Power-boost switch on right consoe ever Prope pedas and evers SAE 2-ever contro pattern Seat bet, 51 mm (2 in.), retractabe Tinted gass Transparent tinted overhead hatch Hot/cod beverage compartment Monitor system with aarm features: Hydrauic oi fiter restriction indicator ight Protection screens for cab front, rear, and side Seat bet, 76 mm (3 in.), non-retractabe Window vanda-protection covers Eectrica 50-amp aternator Bade-type muti-fused circuits Positive-termina battery covers ZXLink wireess communication system (avaiabe in specific countries; see your deaer for detais) Cab extension wiring harness Lights Work ights: Haogen / 2 mounted on boom / 1 mounted on frame / 2 mounted on top of cab See your Hitachi deaer for further information. Net engine power is with standard equipment incuding air ceaner, exhaust system, aternator, and cooing fan, at test conditions specified per ISO No derating is required up to 2000-m (6,560 ft.) atitude. Specifications and design subject to change without notice. Wherever appicabe, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on a unit with 1370-mm (54 in.) bucket, 900-mm (36 in.) doube bar grouser shoes, kg (29,321 b.) counterweight, fu fue tank, and 79-kg (175 b.) operator. Net engine power is with standard equipment incuding air ceaner, exhaust system, aternator, and cooing fan, at test conditions specified per ISO No derating is required up to 3050-m (10,000 ft.) atitude. Specifications and design subject to change without notice. Wherever appicabe, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on units with 1370-mm (54 in.) buckets, fu fue tanks, and 79-kg (175 b.) operators; a ZX380LC-5 unit with 6928-kg (15,274 b.) counterweight and 800-mm (32 in.) tripe semi-grouser shoes; and a ZX380LC-5 unit with 7629-kg (16,819 b.) counterweight and 800-mm (32 in.) heavy-duty tripe semi-grouser shoes. hitachiconstruction.com DKZX870HT5 Litho in U.S.A. (14-02) Hitachi Construction and Mining Products th Avenue Moine, IL
ZAXIS DASH-5 production-class EXCAVATORS ZX670LC kw (463 hp)
ZAXIS DASH-5 production-class EXCAVATORS 345 kw (463 hp) ZAXIS DASH-5 production-class EXCAVATORS Engine Manufacturer and Mode Isuzu 6WG1-iT4 Non-Road Emission Standard EPA Interim Tier 4/EU Stage IIIB
More informationZAXIS 670LC kw (463 hp) 345 kw (463 hp)
345 kw (463 hp) 345 kw (463 hp) ENGINE Manufacturer and Model... Isuzu 6WG1-iT4 Non-Road Emissions Standard... EPA Interim Tier 4/EU Stage IIIB Net Rated Power (ISO 9249)... 345 kw (463 hp) at 1,800 rpm
More information2154G SPECIFICATIONS. 2154G Road Builder / Processor
SPTONS 2154 ngine 2154 Road uilder / Processor U.S. and U.S. Territories Rest of World (ROW) Manufacturer and Model ohn eere PowerTech PVS 6.8 ohn eere PowerTech Plus 6.8 Non-Road mission Standards P inal
More informationROUGH TERRAIN CRANE GR-120NL GR-120N
ROUGH TERRAIN CRANE GR-120NL GR-120N (Standard Jib) JAPANESE SPECIFICATIONS CARRIER MODEL OUTLINE SPEC. NO. GR-120NL 12 t hook X-type Outrigger GR-120N-2-00101 GR-120NL 12 t hook H-type Outrigger GR-120N-2-00102
More informationZAXIS FORESTERS DASH-6 ZX310F-6 ZX370F-6. HitachiConstruction.com
ORSTRS SH-6 ZXIS ZX310-6 ZX370-6 Hitachionstruction.com ZX310-6/ZX370-6 ZXIS SH-6 ORSTRS URILITY UILT-IN. OWNTIM TOSS OUT. SH-6 ORSTRS Owners and operators are Hitachi To The ore because they get what
More informationCONTROL ENGINE SWING SYSTEM SERVICE REFILL CAPACITIES HYDRAULIC SYSTEM UNDERCARRIAGE OPERATING WEIGHT (APPROXIMATE) DRIVES & BRAKES CONTROL MAIN PUMP
SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S IN Perkins / 1204 Water-cooled, 4-cycle diesel, 4-cylinder in-line, irect injection, Turbocharged, harge and air cooled 1995 (gross) 102.1
More informationSWING MACHINES 2154D/2454D/2954D/3754D. Courtesy of Crane.Market
SWING MHINS 2154/2454/2954/3754 Welcome to the top of the food chain. Years in dense woods have evolved some seriously tough traits in the new generation of ohn eere -Series Swing Machines. rom the smaller
More informationNo. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S IN ummins QS6.7 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 136 kw (182.6 HP) at 1,950 rpm J1349 (net) 129 kw (173
More informationSWING MACHINES 3154G / 3156G / 3754G / 3756G PRODUCTIVITY IN FULL SWING
SWING MHINS 3154G / 3156G / 3754G / 3756G PROUTIVITY IN ULL SWING STK TH K. ive years in the making. acked by over a half-century of experience in the woods. To build a better swing machine, we went to
More informationCONTROL ENGINE SWING SYSTEM SERVICE REFILL CAPACITIES HYDRAULIC SYSTEM UNDERCARRIAGE OPERATING WEIGHT (APPROXIMATE) DRIVES & BRAKES MAIN PUMP
SPTONS NGN Maker / Model Type Rated flywheel horse power S N UMMNS QS6.7 ngine Water-cooled, 4-cycle diesel, 6-cylinder inline, irect injection, Turbocharged, harge air cooled, ow emission 1995 (gross)
More informationSWING MACHINES 2154G / 2156G / 2654G / 2656G RELIABLE, EFFICIENT, PRODUCTIVE
SWING MHINS 2154G / 2156G / 2654G / 2656G RLIL, IINT, PROUTIV SWING OR TH NS. TO SIGN OUR 2154G/2156G N 2654G/2656G SWING MHINS, we went to the woods and met with loggers the ones who live it every day.
More informationSWING SYSTEM. No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPIITIONS NGIN aker / odel Type Rated flywheel horse power S IN Perkins / 1204-44TN 4-cycle turbocharged, charge air cooled diesel engine 1995 (gross) 92.7 kw (124 HP) at 1,950 rpm 1349 (net) 87 kw (116
More informationENGINE CONTROL AXLE & WHEEL STEERING SYSTEM HYDRAULIC SYSTEM SWING SYSTEM SERVICE REFILL CAPACITIES UNDERCARRIAGE DRIVES & BRAKES
SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S IN ummins QS6.7 Water-cooled, 4-cycle diesel, 6-cylinder inline, irect injection, Turbocharged, harge air cooled, Low emission J1995 (gross)
More informationDIGITUS Network Cabinet Unique Series, 600, 800 mm width - 600, 800, 1000, 1200 mm depth
DIGITUS Network Cabinet Unique Series 1.5 mm strong sheet steel Loading capacity up to 800 kg Available in color grey and black Large range of equipment available Abstract DIGITUS Network Cabinet Unique
More informationTRUCK PUMPS HYDRAULIC GEAR PUMPS
TRUCK PUMPS HYDRAULIC GEAR PUMPS FEATURES KAPPA 30 and KAPPA 35 hydraulic gear pumps with high strength body for truck applications. SAE B mounting flange allows the pumps to be mounted directly on the
More informationDesign. 3PF Series Triple-Screw Pumps. Manual. MAAG E-01
Design Manual 3PF Series Triple-Screw Pumps W h e r e I n n o v a t i o n F l o w s www.maag.com MAAG-14120-E-01 Maag People are Technology Oriented. 3PF SERIES SECTION X TABLE OF CONTENTS SECTION 1 SCOPE
More informationBreeder Package. Our Experience. Your Success. Count on Chore-Time for experience, reliability, performance and confidence.
Breeder Package Our Experience. Your Success. Count on Chore-Time for experience, reliability, performance and confidence. GENESIS Breeder Feeder The Double Pan Feeding System Multiply Your Feeder Space
More informationPEARL - TILLER ASSEMBLY COMPLETE
Titel - 1 - Titel - 2 - Table Of Contents STERLING Pearl... 4 TILLER... 4 PEARL - TILLER ASSEMBLY COMPLETE... 4 PEARL - TILLER CONTROL ASSEMBLY... 5 PEARL - TILLER PANELS & HANDLE BAR... 6 PEARL - TILLER
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance Momentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More informationBreeder Package. Our Experience. Your Success.
Breeder Package Our Experience. Your Success. genesis Breeder Feeder The Double Pan Feeding System Multiply Your Feeder Space with the GENESIS Breeder Feeder Fit 24 more birds at 12 linear feet (3.66 m)
More informationMARINE CRANES LIFETIME EXCELLENCE PALFINGER MARINE YOUR WORLDWIDE SPECIALIST FOR RELIABLE AND INNOVATIVE MARINE AND OFFSHORE CRANES
MARINE CRANES LIFETIME EXCELLENCE PALFINGER MARINE YOUR WORLDWIDE SPECIALIST FOR RELIABLE AND INNOVATIVE MARINE AND OFFSHORE CRANES 1 LIFETIME EXCELLENCE OUR PRODUCTS ARE DESIGNED TO SATISFY THE SPECIFIC
More informationCages for Raising Pullets. Our Experience. Your Success.
Cages for Raising Pullets Our Experience. Your Success. Modular Manure Belt (MMB ) Pullet System 3-High to 8-High Systems 16.24 [412.5] Cages That Set The Standard 25.34 [643.6] 30.00 [762.0] Chore-Time
More informationSC500 53B. Model: SC B NIL. Part List US-English
Model: SC500 53 B NIL Part List US-English Table of Contents GENERAL VIEW 3 SOLUTION TANK 5 RECOVERY TANK 7 MOTOR DRIVE 9 PADDLE AND DASHBOARD 11 REAR WHEELS 13 SQUEEGEE SYSTEM 15 DISC DECK 17 ELECTRICAL
More information2017 SPRING SEASON Parts and Service Specials fr
2017 SPRING SEASON Great Values Parts and Service Specials from Milton CAT Inside this Issue: 15% OFF Ground Engaging Tools page 3 plus... CAT Excavator Tune-Up Special page 9 20% OFF CAT Grease page 15
More informationPixie-7P. Battery Connector Pixie-7P Fuse* Motor. 2.2 Attaching the Motor Leads. 1.0 Features of the Pixie-7P: Pixie-7P Batt Motor
1.0 Features of the Pixie-7P: Microprocessor controlled Low Resistance (.007 ohms) High rate (2800 Hz) switching (PWM) Up to 7 Amps continuous current (with proper air flow) High Output (1.2amp) Battery
More informationKingpin to rear end 10.1 m (33' 2") Mass on Tandem Allowable Load on Axle Standard: 2 axles
Kingpin to nose 0.2 m (7") 1.2 m (4') 0.4 m (1' 3") Height 3.4 m (11' 2") 1.7 m (5' 7") Kingpin to tandem 7.2 m (23' 7") Axle to axle 0.9 m (3') Track 2.1 m (6'11'') Kingpin to rear end 10.1 m (33' 2")
More informationIQ Range. Electrical Data 3-Phase Power Supplies. Keeping the World Flowing
IQ Range Electrical Data 3-Phase Power Supplies Keeping the World Flowing Contents Section Page Introduction 3 50 Hz 380 V 5 0 V 6 415 V 7 4 V 8 500 V 9 6 V 60 Hz 8 V 11 2 V 0 V 13 4 V 14 460 V 15 480
More informationPALFINGER on the tracks
PLFINGER on the tracks PLFINGER railway equipment optimally matched to the vehicle and its purpose PLFINGER railway equipment is uncompromisingly designed for the conditions of duty on a railway track.
More informationCollection. Die-Cast Scale Model Replicas
2014 Collection Die-Cast Scale Model Replicas NINE NEW MODELS IN THIS EDITION Including 1:50 scale Cat 795F AC Mining Truck and Cat 336E H Hybrid Hydraulic Excavator pictured above. MINING AND QUARRY The
More informationProduct Info Applications System Mgt References Competition
Product Presentation 1 Major aim during the laying period 2 More chicks per hen housed Higher hatchability Higher production More chickens per hen housed Greater profit per flock 3 1 Optimal use of your
More information1: 40ft FR. China project RFQ. Utilization. CoG. OoG info. Container
China project RFQ Port of Loading: Gothenburg Port of Destination: Shanghai for Sweden transformers AB Summary: x 40ft FR 4 x 40ft OT 1 x 20ft OT 11 x 40ft HC Cargo dimensions: mm and kg 1: 40ft FR Inside
More informationBUYING GUIDE ALGOT. Storage across the home. DESIGN Francis Cayouette
BUYING GUIDE ALGOT Storage across the home DESIGN Francis Cayouette QUALITY Designed for use throughout the home. ALGOT shelves are hardwearing, stain resistant and easy to keep clean. Brackets are made
More informationAuction Catalog. Auction Date:
Auction Catalog Complete Plant Closure!! Tight Tolerance Aerospace Machining Facility Auction Date: Tuesday, October 30, 2018 Bidding Starts: 10:00 AM PDT KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale,
More informationAugerMatic & TruPan. Feeding system for rearing and growing turkeys
AugerMatic & TruPan Feeding system for rearing and growing turkeys AUGERMATIC with the flexible TRU PAN feed p A feeding system for turkeys must meet very high standards depending on production method
More informationEUROVENT EU. The enriched colony system for layers
EUROVENT EU The enriched colony system for layers EUROVENT EU reliable, animal friendly and hygienic egg production With the EUROVENT EU colony system Big Dutchman provides you with everything you need
More informationAUGERMATIC. The feeding system for successful poultry growing
AUGERMATIC The feeding system for successful poultry growing AUGERMATIC this unive A feeding system for poulty growing must meet very high standards depending on feed distribution (ad libitum or controlled
More informationSTAGES IN PLANTING. 1 Ground Preparation. 3 Plant handling and storage. 2 Stock Assessment. pre-planting
STAGES IN PLANTING 1 Ground Preparation Suppress any existing vegetation to reduce competition with the panting stock. If using herbicides, appy in ate summer prior to panting. Cutivation both suppresses
More informationThe ultimate flexibility in pullet cage systems
Pullet Cages The ultimate flexibility in pullet cage systems Big Dutchman offers you the ultimate flexibility in pullet cage systems, with a variety of cage styles to meet your specific needs. Choose the
More informationVibratory Tumbler OWNER S MANUAL
Vibratory Tumbler OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information-1- Please refer to the SAFETY INSTRUCTIONS portion of this manual
Aqua Euro USA s 28 Gallon Deluxe Aquarium Deluxe EU-T28S With the right combination of lighting, filtration, water movement and temperature, a beautiful, balanced, healthy aquarium can be yours. Aqua Euro
More informationCross wheelchairs. Cross wheelchairs.
Cross wheelchairs Cross wheelchairs www.etac.com Cross is a cross folding wheelchair which offers a rare combination of comfort and easy manoeuvering. The backrest is infinitely adjustable in height and
More informationBeat the. Up with. For More information contact your PSR or or
Beat the Chill in the Air & Warm Up with these WINTER SPECIALS 2016 2017 See inside for great deals on Parts & Services for your Machines, & Trucks of All Makes & Models. For More information contact your
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS PANNIER CASE (Wave key type) P/N 08L72-MJP-A60 CRF1000L/LD Honda Dealer: Please give a copy of these instructions to your customer. MII 15641
More informationCSA6. Product Specifications. SoftSound SXC 2600
ENVIRONMENTALLY SOUND REFRIGERANT CSA6 SoftSound SXC 2600 Product Specifications 16 SINGLE STAGE AIR CONDITIONER WITH OBSERVER COMMUNICATING CONTROL SYSTEM 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1
More information1: Flatbed. China project. CoG. Utilization. OoG info. Container. Summary: 7 x Flatbed 9 x Box Trailer Cargo dimensions: mm and kg
China project Port of Loading: Gothenburg Port of Destination: Shanghai for Sweden transformers AB Summary: 7 x Flatbed 9 x Box Trailer Cargo dimensions: mm and kg 1: Flatbed Inside Length: 14.6 m Inside
More informationComplete Solutions for BROILER BREEDERS
Complete Solutions for BROILER BREEDERS Global Presence Local Commitment Feeding Drinking Climate Housing Complete Broiler Breeder Packages Broiler-Breeders We at Plasson are aware that the main goal in
More informationSC250. Parts List. Model: /2016 (1) FORM NO
SC250 Parts List Model: 087381020 07/2016 (1) FORM NO. 100001617 TABLE OF CONTENTS GENERAL VIEW... 2 SOLUTION AND RECOVERY TANK... 4 BRUSH MOTOR... 6 CHASSIS - FIXING AND COVER... 8 CHASSIS - VACUUM AND
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS SADDLEBAGS (Wave key type) P/N 08L70-MKA-A30 After 15 NC700X/XD, NC750X/XD Honda Dealer: Please give a copy of these instructions to your
More informationTHE PECO BONING AID A TECHNOLOGICAL ENHANCEMENT OF BEEF QUARTER BONING PRODUCTIVITY
THE PECO BONING AID THE PECO BONING AID A TECHNOLOGICAL ENHANCEMENT OF BEEF QUARTER BONING PRODUCTIVITY Traditional beef quarter boning techniques have largely remained unchanged for decades. Recent technological
More informationILLUSTRATED PARTS LIST
Small Engine Parts 32cc / 3cc GASOLINE POWERED CHAIN SAWS ( )SERIAL NUMBER MODEL BAR & ENGINE MODEL NAME PREFIX NUMBER CHAIN SIZE MS132 - - 1 32cc MS13 - - 1 3cc MS13NAV - - 1 3cc EAGER BEAVER 2010 11-00032-11
More informationCatapult Activity. Catapult Buy From Art.com
Catapult Buy From Art.com Catapult Activity We typically think of a catapult as something that was used in the Middle Ages to destroy the walls of a castle as in the poster shown here. But Catapults have
More informationInterrow cultivator. Hatzenbichler interrow cultivator programm AUSTRIAN AGRO TECHNIK
Hatzenbichler interrow cultivator programm The advantages of the Hatzenbichler interrow cultivator program are primarily the years of experience and the different possibilities for use the interrow cultivator
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publication No. SADDLEBAG SET (Wave key type) MII 14983 P/N 08L70-MJM-A10ZA P/N 08L70-MJM-A10ZB VFR800F/D Issue Date June 2014 PARTS LIST (2) (1) (3) 1 (Wave
More informationASSEMBLY & INSTRUCTION MANUAL
ASSEMBLY & INSTRUCTION MANUAL Congratulations on the purchase of your Ocean Treasures Collection aquarium. Each aquarium has been fabricated to enable a beautiful design, and optimal functionality. We
More informationTOTAL CONCRETE CORE SOLUTIONS
TOTAL CONCRETE CORE SOLUTIONS Toolgal core drill bits and the configuration of our professional diamond bit segments, guarantee quick and high performance drilling in all common construction materials
More informationBUYING GUIDE PLATSA. Storage system
BUYING GUIDE PLATSA Storage system SAFETY This furniture must be fixed to the wall. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your
More information3Bureau of Construction and Maintenance
Promptly sign and date on the line below, then EMI IT CK TO KDOT, EVEN IF NOT IDDIN. Or you may still FX IT TO the Estimating Section at (785) 296-999. ny instructions not followed will result in your
More informationBUYING GUIDE PLATSA. Storage system
BUYING GUIDE PLATSA Storage system SAFETY This furniture must be fixed to the wall. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your
More informationPOULTRY ABATTOIR (SLAUGHTER) FACILITIES
POULTRY ABATTOIR (SLAUGHTER) FACILITIES QINGDAO EMPIRE MACHINERY CO., LTD (EME) ATTN: ALEX LIU (EXECUTIVE DIRECTOR) EMAIL: SALES@QE-MACHINERY.COM/SALES@EME-MACHINERY.COM QINGDAO EMPIRE-PROFESSIONAL LIVESTOCK
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (EVMG), AISI 304 stainless steel (EVM), AISI 316 stainless steel (EVML). APPLICATIONS Civil, industrial, agricultural
More informationMILLING. Minimaster. Catalogue and Technical Guide
MIING Minimaster Cataogue and Technica Guide Minimaster Minimaster too system Minimaster is a modern too system with exchangeabe carbide inserts for sotting, square shouder miing, driing, centring, chamfering
More informationReproMatic & FluxxBreeder
ReproMatic & FluxxBreeder the feeding system for broiler breeders REPROMATIC the feeding system especially for broiler breeders REPROMATIC is a feeding system developed by Big Dutchman to ideally meet
More informationNais > Switches> NV [A7] Switches
Nais > Switches> NV [A] Switches HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE Features Extra long-life spring mechanism More than 10 mechanical operations, 10 electrical High contact rating of 1
More informationServing customers around the world Housing and feeding equipment for modern poultry production in Africa
Company headquarters in Vechta, Germany Africa headquarters in Edenvale, South Africa Serving customers around the world Housing and feeding equipment for modern poultry production in Africa egg production
More informationXL³ 800 IP 55metal distribution cabinets, freestanding enclosures and cable compartments
XL³ 800 IP 55metal distribution cabinets, freestanding 87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 Cat. No(s) : 20451/52/53/54/56/57/58/59/73/74 CONTENTS PAGE 1. General characteristics...
More informationFunctionality meets technology. Our Plstic: High Density PolyethyleneHDPE is a light weight, durable product that when welded becomes as strong as any metal welded alternative. It is extremely easy to
More informationHalf Moon Aquarium Kit
WARNING Buyer/User assumes all responsability for safety and proper use not in accordance with the directions and sately labels. Half Moon Aquarium Kit * Half moon shape aquarium kit * Equipped with a
More informationXL³ 400 class II insulated distribution cabinets and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL³ 400 class II insulated distribution CONTENTS PAGE 1. General characteristics...1 2. Finish...1 3. Range...2 4. Overall dimensions...2
More informationIndex. Bottle Jacks Page 4 Bottle Jacks Page 5 Service Jacks Page 6. Service Jacks Page 8. Light Weight. Features. Service Jacks Page 12
Index ottle Jacks Page 4 ottle Jacks Page 5 Service Jacks Page 6 Features Service Jacks Page 8 ight eight Service Jacks Page 9 Service Jacks Page 10 Service Jacks Page 11 Service Jacks Page 12 luminium
More informationEX3 Stepper-Motor Driven Electronic Expansion Valve Technical Data
The Emerson EX3 is an electronically operated expansion device that provides precise control of refrigerant flow and system superheat. The EX3 employs a high resolution, linear stepper motor in conjunction
More informationSpecifications. Operating space R-2000+C/210F,/165F,/125L
R-2000+C i ii R-2000+C/210F,/165F,/125L +185 DEG. R 26 5 R 31 5 (210F,16 00 (1 25L) 5F) -185 DEG. 1075 215 796 1919 (210F,165F) 2364 (125L) 2655 (210F,165F) 3100 (125L) 370 (210F,165F) 815 (125L) 670 interference
More informationTool holders from Sandvik Coromant. Hydro-Grip. Assortment of high precision chucks
Tool holders from Sandvik Coromant Hydro-Grip Assortment of high precision chucks * up to three times the force of conventional chucks Hydro-Grip high precision tool holders are your guarantee of secure
More informationApplication system. Size and weight reduction of the mechanical unit for a more lightweight and compact robot.
The FANUC R-2000iC robot is a multi-purpose intelligent robot based on FANUC s years of experience and renowned technology. This high performance intelligent robot with outstanding reliability and cost
More informationHaughton Escalator Parts
Haughton Escalator Parts Escalator Parts Steps, Treads and Tools...2 Step Chains and Hardware... Step Rollers...4 Handrails...5 Handrail Sheaves....6 Miscellaneous Handrail Parts...7 Switches...8 Controls...9
More informationUpgrade KIT IV Operation Manual
Upgrade KIT IV Operation Manual Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference. Before you start It is important to perform
More informationSmall ( Mini) Incubators
Small ( Mini) s Automatic hobby incubators with smart technologies designed to hatch a wide range of poultry eggs which include quail, chicken, pheasant, duck, goose and swan. Suitable for hobbyists and
More informationComplete Range of Watering Systems for Breeders & Pullets
Range of Watering Systems for Breeders & Pullets 2012 G l o b a l P r e s e n c e - L o c a l C o m m i t m e n t P l a s s o n O f f e r s Y o u W o r l d C l a s s N i p p l e S Optimum performance Plasson
More informationReproMatic & FluxxBreeder
ReproMatic & FluxxBreeder The feeding system developed specifically for broiler breeders ReproMatic the feeding system for broiler breeders ReproMatic is a Big Dutchman feeding system which was developed
More information7200 Interstate 20 Kennedale, TX Kennedale (214) Toll Free Fax (214)
H & O DIE SUPPLY, INC. PRECISION ABRICATING MACHINERY 7200 Interstate 20 Kennedale, TX 76060 Kennedale (214) 630-6660 Toll ree 1-800-222-5441 ax (214) 630-6693 Email: sales@hodie.com Web Site: www.hodie.com
More informationInstruction Manual. 6. Connectors. Latest news and tips can be taken from Be flapscinated.
6. Connectors Instruction Manual 1 4 2 3 1: Power cord for pump, 2: Cable for lighting, 3: Power supply for lighting, 4: Switch for lighting Latest news and tips can be taken from www.jellyflap.de! Be
More informationBlue Malawi Operation Manual GB
Blue Malawi 1000 Operation Manual GB With the purchase of this filtration system you have selected a top quality product. It has been specifically designed for aquaristic purposes and has been tested by
More informationBUYING GUIDE PLATSA. Storage system
BUYING GUIDE PLATSA Storage system SAFETY This furniture must be fixed to the wall. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your
More informationThe Canadian Verified Sheep Program
The Canadian Verified Sheep Program Canadian Sheep Federation Fédération Canadienne du Mouton Acknowedgements The Canadian Sheep Federation woud ike to thank a those who have been invoved in the creation
More informationFAQ (Frequently Asked Questions)
File: FAQ-FCI-Updated-12-21-12 Page: 1 of 11 Table of Contents Pg(s) I. Benefits of using FCI s... 1 II. Installation... 2-5 III. AccQTrip for OLM & UCM Models... 5 IV. Adaptive trip Logic for 1547 & 1548
More informationDesign Guide. You can relax with a INSTALLATION QUALITY,CERTIFIED QTANK POLY RAINWATER TANKS. qtank.com.au
INSTALLATION Design Guide A division of QSolutions Co POLY RAINWATER TANKS You can relax with a QUALITY,CERTIFIED QTANK qtank.com.au sales@qsolutionsco.com.au (07) 3881 0208 THE FOLLOWING GUIDELINES APPLY
More informationAccessories for Pigeon
Accessories for Pigeon 1 WIDOWHOOD BOXES With drawer Article no. 300 With conveyor belt Article no. 303 Cabinet depth 57 cm Box height 34 cm Box width: 54,2 / 59,2 / 64,2 / 69,2 / 74,2 cm For further information,
More informationLittle Love Puppy Pal
Parent s Guide Little Love Puppy Pal 91-003364-000 UK INTRODUCTION Thank you for purchasing the VTech Little Love Puppy Pal! Little Love will take special care of her puppy friend as they interact and
More informationIndustrial Batteries Network Power Marathon M FT AGM Modular Power.
Industrial Batteries Network Power Marathon M FT AGM Modular Power. Specifications Excellent energy storage system on modular basis. Specifications Marathon FT batteries are excellent AGM power packages
More informationEBARA FLOW SWITCH CONTROLLED BOOSTER SYSTEM
EBARA FLOW SWITC CONTROLLED BOOSTER SYSTEM Ebara ydro Booster pressure set type UD is a flow switch control system which prevents frequent start/ stop of pumps, thus ensure constant water supply. Application
More informationPressure Tanks. ASME Code Stainless Steel, Galvanized and ASME PT Series Tanks. A R 10/11
Pressure ASME Code Stainless Steel, Galvanized and ASME PT Series www.binks.com A183-100 R 10/11 Selection Guide step 1 Select size and scope. Gallons of Coating Per 8 Hour Shift step 2 Up to 5 Up to 10
More informationThe Heifer Facility Puzzle: The New Puzzle Pieces
The Heifer Facility Puzzle: The New Puzzle Pieces Joe Harner Biological and Agricultural Engineering Kansas State University Manhattan, KS jharner@ksu.edu / 785.532.2900 Dan McFarland Sr Extension Educator
More informationCAT UNDERCARRIAGE SELECTION GUIDE. Helping you select the right undercarriage
CAT UNDERCARRIAGE SELECTION GUIDE Helping you select the right undercarriage WHAT S THE RIGHT FIT FOR YOUR APPLICATION? We ve been helping customers find the best undercarriage built for their job requirements
More informationInter IKEA Systems B.V. (April 26, 2018) Canada FY18 Printed on recycled paper (Please recycle)
Inter IKEA Systems B.V. (April 26, 2018) Canada FY18 Printed on recycled paper (Please recycle) ALGOT Storage across the home DESIGN Francis Cayouette QUALITY Designed for use throughout the home. ALGOT
More informationSmart Automatic Cat Feeding Machine (SACFM) (sack-ff-mm)
Smart Automatic Cat Feeding Machine (SACFM) (sack-ff-mm) Group Members Tim Forkenbrock, Austin Scruggs, Kristin Soriano Sponsors IST, potential for others Motivation The common household cat can come in
More informationDrinking Systems for Breeders & Pullets
Drinking Drinking Systems for Breeders & Pullets Global Presence Local Commitment Feeding Drinking Climate Housing Nipple Systems for Breeders & Pullets Plasson provides a full range of nipple systems
More informationRecommended Resources: The following resources may be useful in teaching
Unit D: Egg Production Lesson 1: Producing Layers Student Learning Objectives: Instruction in this lesson should result in students achieving the following objectives: 1. Discuss the materials and equipment
More informationULTRA CLEAR SW AQUARIUM
Made in E.U. Fabrication Européenne ULTRA CLEAR SW AQUARIUM INSTRUCTION MANUAL SCAN THIS CODE VISIT OUR WEBSITE ULTRA CLEAR SW Information and Safety Instructions 02 Installation Instructions 04 Warranty
More informationLifting points for CLT. a practical guide
a practical guide Date: 01.07.2016 Disclaimer The present document shall give an idea about the different possibilities of lifting CLT panels along with recommended load bearing capacities for the individual
More informationSAFETY BURNDY HYPRESS TM OPERATING & MAINTENANCE INSTRUCTIONS Y750BH 2004 FCI USA INC.
SAFETY OPERATING & MAINTENANCE INSTRUCTIONS BURNDY HYPRESS TM Y750BH 2004 FCI USA INC. 1 TABLE OF CONTENTS Warranty... 1 Safety Information... 2 Description... 3 Features & Benefits... 3 Specifications
More informationGetting Started. Device Overviews. Setting Up the Pro 550 System Before you can use the Pro 550 system, you must set up the devices.
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Pro 550 System Before you can use
More information