T-ADAPTORS. Technical specification adaptors PRODUCT CATALOGUE 2009

Transcription

1 Adaptors Table of contents Hydroscand can offer a wide range of adaptors (connector nipples) for different purposes such as: transformation between small and large thread dimensions; swivel transformation for solid threads; connecting hoses or pipes with threads in valves, pumps and cylinders; transformation between different thread systems; bulkhead connection for hoses; branching pipes or hoses with T-connections; sealing off pipes, hoses or thread endings. Our adaptors are normally manufactured in carbon steel of hydraulic quality, i.e. in a crack tested material. The standard surface treatment is E-Coated, which is the name of the surface treatment we use on our fittings. This surface treatment is Cr 6 -free and is therefore better for both the environment and personal health. Elbow and T-adaptors are normally soldered but some are available in forged design. When dealing with higher pressures, avoid if possible adaptors with R- or NPTF-thread since these are harder to seal and often crack the goods when tightened too excessively. You will find more information about steel pipe adaptors in chapter 6 Cutting ring fittings and in chapter :6 Flare fittings. Straight ADAPTORS PAGE 002 G M G M G M G M Reduction adaptor G M G F Swivel adaptor G FS G FS Straight swivel G M G FS Reduction adaptor G M G F long Reduction adaptor G M G F Short Reduction adaptor G M G F short Reduction adaptor G M G F long Straight bushing G F G F G M R M G F JIC M G M SAE O M G M M M G M NPT M R M R M Straight swivel G FS NPT M M M M M Special adaptor for high pressure washer Special adaptor for high pressure washer Special adaptor for high pressure washer Special adaptor for high pressure washer Special adaptor for high pressure washer Banjo G M Banjo M M BulkheadG M G M Lock nut for Bulkhead Choke G M G M 25 Technical specification adaptors Material: Steel BS according to MoPb DIN SIS Surface treatment: E-coated Fe/Zn 8 P1T Temperature range: C Elbow ADAPTORS PAGE 201 Elbow 90 adaptor G M G FS Elbow 90 adaptor G F G F Elbow 90 adaptor G M G FS Adjustable elbow adaptor G M G M Swivel elbow 90 Bend G M G FS Swivel elbow 90 Bend G FS G FS Elbow adaptor 90 G M R M Swivel elbow 45 G M G FS Swivel elbow 45 G M G FS Adjustable elbow G M G M Swivel elbow 45 G M G FS 26 T-ADAPTORS PAGE 401 T-Adaptor G M G M G M T-Adaptor G FS G FS G FS T-Adaptor G M G M G FS L-Adaptor G M G FS G M T-Adaptor G F G F G F T-Adaptor G M G M R M Adjustable T-Adaptor G M G M G M Adjustable L-Adaptor G M G M G M 2 Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice. The table of contents continues on the next page. 26

2 Table of contents Adaptors NPT-THREAD PAGE 085 Straight bushing NPT M NPT F NPT M NPT M Elbow 90 NPT F NPT F Elbow 90 NPT M NPT F Elbow 90 NPT M NPT M T-adaptor NPT F F F 28 PLUGS PAGE 501 Plug G M Plug R M Plug R FS Inset plug G M Inset plug UNF Inset plug M M Plug NPT M Lock G F Plug ROV L M M Plug ROV S M M Plug UNF M 280 Plug-in fittings PAGE 3C14 48 Release ring 280 3C14 49 Assembly stop 280 C Plug-in Female M G-threaded 281 C Plug Female 281 C Plug-in kit 281 C Plug male 281 C Plug-in Female M SAE-O 281 C Plug-in Female M G-threaded 281 C Plug-in Female M MM-threaded 281 C14 84 Packing kit Female

3 002 G M G M 60 cone sealing. DIN 3852, A G 1/8" M G 1/8" M G 1/8" M G 1/4" M G 1/8" M G 3/8" M G 1/8" M G 1/2" M G 1/4" M G 1/4" M G 1/4" M G 3/8" M G 1/4" M G 1/2" M G 1/4 "M G 3/4" M G 3/8" M G 3/8" M G 3/8" M G 1/2" M G 3/8" M G 5/8" M G 3/8" M G 3/4" M G 3/8" M G 1" M G 1/2" M G 1/2" M G 1/2" M G 5/8" M G 1/2" M G 3/4" M G 1/2" M G 1" M G 5/8" M G 5/8" M G 5/8" M G 3/4" M G 3/4" M G 3/4" M G 3/4" M G 1" M G 3/4" M G 1 1/4" M G 1" M G 1" M G 1" M G 1 1/4" M G 1" M G 1 1/2" M G 1" M G 2" M G 1 1/4" M G 1 1/4" M G 1 1/4" M G 1 1/2" M G 1 1/4" M G 2" M G 1 1/2" M G 1 1/2" M G 1 1/2" M G 2" M G 2" M G 2" M 003 G M G M Flat face sealing G 1/2" M G 1/2" M 005 Reduction adaptor G M G F 60 cone sealing G 1/8" M G 1/8" F G 1/8" M G 1/4" F G 1/4" M G 1/8" F G 1/4" M G 1/4" F G 1/4" M G 3/8" F G 3/8" M G 1/4" F G 3/8" M G 3/8" F G 3/8" M G 1/2" F G 1/2" M G 3/8" F G 1/2" M G 1/2" F G 1/2" M G 5/8" F G 1/2" M G 3/4" F G 5/8" M G 1/2" F G 5/8" M G 5/8" F G 5/8" M G 3/4" F G 3/4" M G 1/2" F G 3/4" M G 3/4" F G 3/4" M G 1" F G 1" M G 3/4" F G 1" M G 1" F G 1" M G 1 1/4" F G 1 1/4" M G 1" F G 1 1/4" M G 1 1/4" F G 1 1/4" M G 1 1/2" F G 1 1/4" M G 2" F G 1 1/2" M G 1 1/4" F G 1 1/2" M G 1 1/2" F G 1 1/2" M G 2" F G 2" M G 1 1/2" F 269

4 00 Swivel adaptor G FS G FS 008 Straight swivel G M G FS G 1/8" FS G 1/8" FS G 1/8" FS G 1/4" FS G 1/4" FS G 1/4" FS G 1/4" FS G 3/8" FS G 1/4" FS G 1/2" FS G 3/8" FS G 3/8" FS G 3/8" FS G 1/2" FS G 1/2" FS G 1/2" FS G 1/2" FS G 5/8" FS G 1/2" FS G 3/4" FS G 5/8" FS G 5/8" FS G 5/8" FS G 3/4" FS G 3/4" FS G 3/4" FS G 3/4" FS G 1" FS G 1" FS G 1" FS G 1 1/4" FS G 1 1/4" FS G 1 1/2" FS G 1 1/2" FS G 2" FS G 2" FS G 1/8" M G 1/8" FS G 1/8" M G 1/4" FS G 1/4" M G 1/8" FS G 1/4" M G 1/4" FS G 1/4" M G 3/8" FS G 1/4" M G 1/2" FS G 3/8" M G 1/4" FS G 3/8" M G 3/8" FS G 3/8" M G 1/2" FS G 3/8" M G 5/8" FS G 1/2" M G 1/4" FS G 1/2" M G 3/8" FS G 1/2" M G 1/2" FS G 1/2" M G 5/8" FS G 1/2" M G 3/4" FS G 5/8" M G 1/2" FS G 5/8" M G 5/8" FS G 5/8" M G 3/4" FS G 3/4" M G 3/8" FS G 3/4" M G 1/2" FS G 3/4" M G 5/8" FS G 3/4" M G 3/4" FS G 3/4" M G 1" FS G 1" M G 1/2" FS G 1" M G 3/4" FS G 1" M G 1" FS G 1" M G 1 1/4" FS G 1 1/4" M G 1" FS G 1 1/4" M G 1 1/4" FS G 1 1/4" M G 1 1/2" FS G 1 1/2" M G 1 1/4" FS G 1 1/2" M G 1 1/2" FS G 1 1/2" M G 2" FS G 2" M G 2" FS 20

5 009 Reduction adaptor G M G F long 01 Reduction adaptor G M G F short ED sealing G 1/8" M G 1/4" F G 1/8" M G 3/8" F G 1/4" M G 1/8" F G 1/4" M G 3/8" F G 1/4" M G 1/2" F G 1/4" M G 3/4" F G 3/8" M G 1/4" F G 3/8" M G 1/2" F G 3/8" M G 3/4" F G 1/2" M G 3/8" F G 1/2" M G 3/4" F G 1/2" M G 1" F G 1/2" M G 1 1/4" F G 3/4" M G 1/2" F G 3/4" M G 1" F G 3/4" M G 1 1/4" F G 3/4" M G 1 1/2" F G 1" M G 3/4" F G 1" M G 1 1/4" F G 1" M G 1 1/2" F G 1 1/4" M G 1" F G 1 1/4" M G 1 1/2" F G 1 1/2" M G 1 1/4" F 010 Reduction adaptor G M G F Short G 3/8" M G 1/8" F G 1/2" M G 1/8" F G 1/2" M G 1/4" F G 3/4" M G 1/4" F G 3/4" M G 3/8" F G 3/4" M G 1/2" F G 1" M G 1/4" F G 1" M G 3/8" F G 1" M G 1/2" F G 1 1/4" M G 1/2" F G 1 1/4" M G 3/4" F G 1 1/2" M G 1/2" F G 1 1/2" M G 3/4" F G 1 1/2" M G 1" F G 2" M G 1/2" F G 2" M G 1 1/4" F G 3/8" M ED G 1/8" F G 1/2" M ED G 1/8" F G 1/2" M ED G 1/4" F G 3/4" M ED G 1/4" F G 3/4" M ED G 3/8" F G 1" M ED G 1/4" F G 1" M ED G 3/8" F G 1" M ED G 1/2" F G 1 1/4" M ED G 1/2" F G 1 1/4" M ED G 3/4" F G 1 1/2" M ED G 1/2" F G 1 1/2" M ED G 3/4" F G 1 1/2" M ED G 1" F 018 Reduction adaptor G M G F long ED sealing G 1/8" M ED G 1/4" F G 1/8" M ED G 3/8" F G 1/4" M ED G 1/8" F G 1/4" M ED G 3/8" F G 1/4" M ED G 1/2" F G 1/4" M ED G 3/4" F G 3/8" M ED G 1/4" F G 3/8" M ED G 1/2" F G 3/8" M ED G 3/4" F G 1/2" M ED G 3/8" F G 1/2" M ED G 3/4" F G 1/2" M ED G 1" F G 1/2" M ED G 1 1/4" F G 3/4" M ED G 1/2" F G 3/4" M ED G 1" F G 3/4" M ED G 1 1/4" F G 3/4" M ED G 1 1/2" F G 1" M ED G 3/4" F G 1" M ED G 1 1/4" F G 1" M ED G 1 1/2" F G 1 1/4" M ED G 1" F G 1 1/4" M ED G 1 1/2" F G 1 1/2" M ED G 1 1/4" F 21

6 011 Straight bushing G F G F 013 G F JIC M G 1/8" F G 1/8" F G 1/8" F G 1/4" F G 1/8" F G 3/8" F G 1/4" F G 1/4" F G 1/4" F G 3/8" F G 1/4" F G 1/2" F G 3/8" F G 3/8" F G 3/8" F G 1/2" F G 3/8" F G 3/4" F G 1/2" F G 1/2" F G 1/2" F G 5/8" F G 1/2" F G 3/4" F G 1/2" F G 1" F G 5/8" F G 5/8" F G 5/8" F G 3/4" F G 3/4" F G 3/4" F G 3/4" F G 1" F G 1" F G 1" F G 1" F G 1 1/4" F G 1 1/4" F G 1 1/4" F G 1 1/4" F G 1 1/2" F G 1 1/2" F G 1 1/2" F G 1 1/2" F G 2" F G 2" F G 2" F 012 G M R M G 1/8" M R 1/8" M G 1/8" M R 1/4" M G 1/4" M R 1/8" M G 1/4" M R 1/4" M G 1/4" M R 3/8" M G 1/4" M R 1/2" M G 3/8" M R 1/4" M G 3/8" M R 3/8" M G 3/8" M R 1/2" M G 3/8" M R 3/4" M G 1/2" M R 3/8" M G 1/2" M R 1/2" M G 1/2" M R 5/8" M G 1/2" M R 3/4" M G 5/8" M R 5/8" M G 3/4" M R 1/4" M G 3/4" M R 3/8" M G 3/4" M R 1/2" M G 3/4" M R 3/4" M G 3/4" M R 1" M G 1" M R 3/4" M G 1" M R 1" M G 1" M R 1 1/4" M G 1 1/4" M R 3/4" M G 1 1/4" M R 1 1/4" M G 1 1/2" M R 1 1/2" M G 2" M R2" M G 1/8" M JIC /16" M G 1/4" M JIC /16" M G 1/4" M JIC 1/2" M G 1/4" M JIC 9/16" M G 1/4" M JIC 3/4" M G 3/8" M JIC /16" M G 3/8" M JIC 1/2" M G 3/8" M JIC 9/16" M G 3/8" M JIC 3/4" M G 3/8" M JIC /8" M G 1/2" M JIC /16" M G 1/2" M JIC 1/2" M G 1/2" M JIC 9/16" M G 1/2" M JIC 3/4" M G 1/2" M JIC /8" M G 1/2" M JIC 1 1/16" M G 1/2" M JIC 1 3/16" M G 5/8" M JIC 3/4" M G 5/8" M JIC /8" M G 5/8" M JIC 1 1/16" M G 5/8" M JIC 1 5/16" M G 3/4" M JIC 3/4" M G 3/4" M JIC /8" M G 3/4" M JIC 1 1/16" M G 3/4" M JIC 1 3/16" M G 3/4" M JIC 1 5/16" M G 1" M JIC /8" M G 1" M JIC 1 1/16" M G 1" M JIC 1 3/16" M G 1" M JIC 1 5/16" M G 1" M JIC 1 5/8" M G 1 1/4" M JIC 1 5/8" M G 1 1/2" M JIC 1 5/8" M G 1 1/2" M JIC 1 /8" M G 2" M JIC 2 1/2" M 22

7 015 G M SAE O M 022 G M NPT M G 1/4" M SAE /16" M G 1/4" M SAE 1/2" M G 1/4" M SAE 9/16" M G 1/4" M SAE 3/4" M G 3/8" M SAE 9/16" M G 3/8" M SAE 3/4" M G 1/2" M SAE 3/4" M G 1/2" M SAE /8" M G 1/2" M SAE 1 1/16" M G 1/2" M SAE 1 5/16" M G 5/8" M SAE /8" M G 5/8" M SAE 1 1/16" M G 3/4" M SAE 1 1/16" M G 3/4" M SAE 1 3/16" M G 3/4" M SAE 1 5/16" M G 1" M SAE 1 3/16" M G 1" M SAE 1 5/16" M G 1" M SAE 1 5/8" M 019 G M M M G 1/8" M M 10 x 1.0 M G 1/8" M M 12 x 1.5 M G 1/4" M M 10 x 1.0 M G 1/4" M M 12 x 1.5 M G 1/4" M M 14 x 1.5 M G 1/4" M M 16 x 1.5 M G 1/4" M M 18 x 1.5 M G 3/8" M M 12 x 1.5 M G 3/8" M M 14 x 1.5 M G 3/8" M M 16 x 1.5 M G 3/8" M M 18 x 1.5 M G 3/8" M M 20 x 1.5 M G 3/8" M M 22 x 1.5 M G 1/2" M M 16 x 1.5 M G 1/2" M M 18 x 1.5 M G 1/2" M M 20 x 1.5 M G 1/2" M M 22 x 1.5 M G 1/2" M M 26 x 1.5 M G 5/8" M M 26 x 1.5 M G 3/4" M M 18 x 1.5 M G 3/4" M M 22 x 1.5 M G 3/4" M M 26 x 1.5 M G 3/4" M M 30 x 1.5 M G 1" M M 22 x 1.5 M G 1" M M 33 x 2.0 M G 1/8" M 1/8"-2 NPT M G 1/4" M 1/8"-2 NPT M G 1/4" M 1/4"-18 NPT M G 1/4" M 3/8"-18 NPT M G 1/4" M 1/2"-14 NPT M G 3/8" M 1/4"-18 NPT M G 3/8" M 3/8"-18 NPT M G 3/8" M 1/2"-14 NPT M G 3/8" M 3/4"-14 NPT M G 1/2" M 3/8"-18 NPT M G 1/2" M 1/2"-14 NPT M G 1/2" M 3/4"-14 NPT M G 1/2" M 1"-11½ NPT M G 5/8" M 1/2"-14 NPT M G 3/4" M 1/4"-18 NPT M G 3/4" M 3/8"-18 NPT M G 3/4" M 1/2"-14 NPT M G 3/4" M 3/4"-14 NPT M G 3/4" M 1"-11½ NPT M G 1" M 1/2"-14 NPT M G 1" M 3/4"-14 NPT M G 1" M 1"-11½ NPT M G 1" M 1 1/4"-11½ NPT M G 1" M 1 1/2"-11½ NPT M G 1 1/4" M 1 1/4"-11½ NPT M G 1 1/2" M 1"-11½ NPT M G 1 1/2" M 1 1/2"-11½ NPT M G 2" M 1 1/2"-11½ NPT M G 2" M 2"-11½ NPT M 023 R M R M R 1/4" M R 1/4" M R 3/8" M R 3/8" M R 1/2" M R 1/2" M R 1" M R 1" M 02 Straight swivel G FS NPT M G 1/8" FS 1/4"-18 NPT M G 1/4" FS 1/8"-2 NPT M G 1/4" FS 1/4"-18 NPT M G 3/8" FS 3/8"-18 NPT M G 1/2" FS 1/2"-14 NPT M 23

8 00 M M M M 04 Special adaptor for high pressure washer M 10 x 1.0 M M 10 x 1.0 M M 10 x 1.0 M M 12 x 1.5 M M 12 x 1.5 M M 12 x 1.5 M M 12 x 1.5 M M 14 x 1.5 M M 12 x 1.5 M M 16 x 1.5 M M 14 x 1.5 M M 14 x 1.5 M M 14 x 1.5 M M 16 x 1.5 M M 14 x 1.5 M M 18 x 1.5 M M 16 x 1.5 M M 16 x 1.5 M M 16 x 1.5 M M 18 x 1.5 M M 16 x 1.5 M M 22 x 1.5 M M 18 x 1.5 M M 18 x 1.5 M M 18 x 1.5 M M 20 x 1.5 M M 18 x 1.5 M M 22 x 1.5 M M 18 x 1.5 M M 26 x 1.5 M M 22 x 1.5 M M 22 x 1.5 M M 22 x 1.5 M M 30 x 1.5 M M 26 x 1.5 M M 26 x 1.5 M M 30 x 1.5 M M 30 x 1.5 M M 22 x 1.5 M M 22 x 1.5 M HPW 05 Special adaptor for high pressure washer M 22 x 1.5 M G 1/4" M HPW M 22 x 1.5 M G 3/8" M HPW 01 Special adaptor for high pressure washer 081 Banjo G M M 22 x 1.5 FS G 1/4" M HPW M 22 x 1.5 FS G 3/8" M HPW 02 Special adaptor for high pressure washer Part number Type For bolt Thread Banjo G 1/4" G 1/4" M Banjo G 3/8" G 1/4" M Banjo G 3/8" G 3/8" M Banjo G 1/2" G 3/8" M Banjo G 1/2" G 1/2" M Banjo G 3/4" G 1/2" M Banjo G 3/4" G 3/4" M M 22 x 1.5 FS G 1/4" F HPW M 22 x 1.5 FS G 3/8" F HPW 082 Banjo M M 03 Special adaptor for high pressure washer Part number Type For bolt Thread Banjo M14 M 14 x 1.5 M Banjo M18 M 18 x 1.5 M M 22 x 1.5 M G 1/4" F HPW M 22 x 1.5 M G 3/8" F HPW 24

9 090 Bulkhead G M G M 201 Elbow 90 adaptor G M G FS G 1/4" M Bulkhead G 1/4" M G 1/4" M Bulkhead G 3/8" M G 3/8" M Bulkhead G 3/8" M G 1/2" M Bulkhead G 3/8" M G 1/2" M Bulkhead G 1/2" M G 5/8" M Bulkhead G 5/8" M G 3/4" M Bulkhead G 3/4" M G 1" M Bulkhead G 1" M G 1 1/4" M Bulkhead G 1 1/4" M G 1 1/2" M Bulkhead G 1 1/2" M G 2" M Bulkhead G 2" M G 1/8" M 90 G 1/8" FS G 1/4" M 90 G 1/4" FS G 3/8" M 90 G 3/8" FS G 1/2" M 90 G 1/2" FS G 5/8" M 90 G 5/8" FS G 3/4" M 90 G 3/4" FS G 1" M 90 G 1" FS G 1 1/4" M 90 G 1 1/4" FS G 1 1/2" M 90 G 1 1/2" FS G 2" M 90 G 2" FS Lock nut for Bulkhead 202 Elbow 90 adaptor G F G F Part number Type To Thread Lock nut G 1/4" M Lock nut G 3/8" M Lock nut G 1/2" M Lock nut G 5/8" M Lock nut G 3/4" M Lock nut G 1" M Lock nut G 1 1/4" M G 1/8" F 90 G 1/8" F G 1/4" F 90 G 1/4" F G 3/8" F 90 G 3/8" F G 1/2" F 90 G 1/2" F G 3/4" F 90 G 3/4" F G 1" F 90 G 1" F 092 Choke G M G M Own drilling G 1/8" M G 1/8" M choke G 1/4" M G 1/4" M choke G 1/4" M G 1/4" M choke G 3/8" M G 3/8" M choke G 3/8" M G 1/2" M choke G 1/2" M G 1/2" M choke G 1/2" M G 3/4" M choke G 3/4" M G 3/4" M choke 203 Elbow 90 adapt0r G M G FS Forged G 1/8" M 90 Forged G 1/8" FS G 1/4" M 90 Forged G 1/4" FS G 3/8" M 90 Forged G 3/8" FS G 1/2" M 90 Forged G 1/2" FS G 3/4" M 90 Forged G 3/4" FS G 1" M 90 Forged G 1" FS G 1 1/4" M 90 Forged G 1 1/4" FS 25

10 204 Adjustable elbow adaptor G M G M 301 Swivel elbow 45 G M G FS G 1/4" M 90 G 1/4" M Adj G 3/8" M 90 G 3/8" M Adj G 1/2" M 90 G 1/2" M Adj G 3/4" M 90 G 3/4" M Adj G 1" M 90 G 1" M Adj G 1 1/4" M 90 G 1 1/4" M Adj G 1/4" M 45 G 1/4" FS G 3/8" M 45 G 3/8" FS G 1/2" M 45 G 1/2" FS G 3/4" M 45 G 3/4" FS G 1" M 45 G 1" FS G 1 1/4" M 45 G 1 1/4" FS 205 Swivel elbow 90 Bend G M G FS G 1/8" M 90 G 1/8" FS G 1/4" M 90 G 1/4" FS G 3/8" M 90 G 3/8" FS G 1/2" M 90 G 1/2" FS G 3/4" M 90 G 3/4" FS G 1" M 90 G 1" FS G 1 1/4" M 90 G 1 1/4" FS G 1 1/2" M 90 G 1 1/2" FS 303 Swivel elbow 45 G M G FS Forged G 1/4" M 45 Forged G 1/4" FS G 3/8" M 45 Forged G 3/8" FS G 1/2" M 45 Forged G 1/2" FS G 3/4" M 45 Forged G 3/4" FS G 1" M 45 Forged G 1" FS 206 Swivel elbow 90 Bend G FS G FS 304 Adjustable elbow G M G M G 1/4" FS 90 G 1/4" FS G 3/8" FS 90 G 3/8" FS G 1/2" FS 90 G 1/2" FS G 1" FS 90 G 1" FS G 1 1/2" FS 90 G 1 1/2" FS G 1/4" M 45 G 1/4" M Adj G 3/8" M 45 G 3/8" M Adj G 1/2" M 45 G 1/2" M Adj G 3/4" M 45 G 3/4" M Adj G 1" M 45 G 1" M Adj 210 Elbow adaptor 90 G M R M 305 Swivel elbow 45 G M G FS G 1/8" M 90 R 1/8" M G 1/4" M 90 R 1/4" M G 3/8" M 90 R 3/8" M G 3/8" M 90 R 1/2" M G 1/2" M 90 R 1/2" M G 3/4" M 90 R 3/4" M G 1" M 90 R 1" M G 1/4" M 45 G 1/4" FS G 3/8" M 45 G 3/8" FS G 1/2" M 45 G 1/2" FS G 5/8" M 45 G 5/8" FS G 3/4" M 45 G 3/4" FS G 1" M 45 G 1" FS 26

11 401 T-Adaptor G M G M G M 406 T-Adaptor G F G F G F x Thread 3 x Thread G 1/4" M G 1/4" M G 1/4" M G 3/8" M G 3/8" M G 3/8" M G 1/2" M G 1/2" M G 1/2" M G 3/4" M G 3/4" M G 3/4" M G 1" M G 1" M G 1" M G 1 1/4" M G 1 1/4" M G 1 1/4" M G 1 1/2" M G 1 1/2" M G 1 1/2" M G 1/8" F G 1/8" F G 1/8" F G 1/4" F G 1/4" F G 1/4" F G 3/8" F G 3/8" F G 3/8" F G 1/2" F G 1/2" F G 1/2" F G 3/4" F G 3/4" F G 3/4" F G 1" F G 1" F G 1" F G 1 1/4" F G 1 1/4" F G 1 1/4" F 402 T-Adaptor G FS G FS G FS 411 T-Adaptor G M G M R M x Thread G 1/4" FS G 1/4" FS G 1/4" FS G 3/8" FS G 3/8" FS G 3/8" FS G 1/2" FS G 1/2" FS G 1/2" FS G 3/4" FS G 3/4" FS G 3/4" FS G 1" FS G 1" FS G 1" FS G 1 1/4" FS G 1 1/4" FS G 1 1/4" FS x Thread G 1/4" M G 1/4" M R 1/4" M G 3/8" M G 3/8" M R 3/8" M G 1/2" M G 1/2" M R 1/2" M G 3/4" M G 3/4" M R 3/4" M G 1" M G 1" M R 1" M 403 T-Adaptor G M G M G FS 413 Adjustable T-Adaptor G M G M G M x Thread G 1/4" M G 1/4" M G 1/4" FS G 3/8" M G 3/8" M G 3/8" FS G 1/2" M G 1/2" M G 1/2" FS G 3/4" M G 3/4" M G 3/4" FS G 1" M G 1" M G 1" FS G 1 1/4" M G 1 1/4" M G 1 1/4" FS G 1 1/2" M G 1 1/2" M G 1 1/2" FS x Thread G 1/4" M G 1/4" M G 1/4" M G 3/8" M G 3/8" M G 3/8" M G 1/2" M G 1/2" M G 1/2" M G 3/4" M G 3/4" M G 3/4" M G 1" M G 1" M G 1" M 404 L-Adaptor G M G FS G M 414 Adjustable L-Adaptor G M G M G M x Thread G 1/4" M G 1/4" FS G 1/4" M G 3/8" M G 3/8" FS G 3/8" M G 1/2" M G 1/2" FS G 1/2" M G 3/4" M G 3/4" FS G 3/4" M G 1" M G 1" FS G 1" M G 1 1/4" M G 1 1/4" FS G 1 1/4" M G 1 1/2" M G 1 1/2" FS G 1 1/2" M x Thread G 1/4" M G 1/4" M G 1/4" M G 3/8" M G 3/8" M G 3/8" M G 1/2" M G 1/2" M G 1/2" M G 3/4" M G 3/4" M G 3/4" M G 1" M G 1" M G1" M 2

12 085 Straight bushing NPT M NPT F 281 Elbow 90 NPT F NPT F NPT 1/8" F NPT 1/8" F NPT 1/4" F NPT 1/4" F NPT 1/4" F NPTF 3/8" F NPT 1/2" F NPT 1/2" F NPTF 3/4" F NPTF 3/4" F NPT 3/4" F NPT 1" F NPTF 1 1/4" F NPTF 1 1/4" F 08 NPT M NPT M NPT 1/8" M NPT 1/8" M NPT 1/8" M NPT 1/4" M NPT 1/8" M NPT 1/4" M NPT 1/4" M NPT 3/8" M NPT 1/4" M NPT 1/2" M NPT 3/8" M NPT 3/8" M NPT 3/8" M NPT 1/2" M NPT 1/2" M NPT 1/2" M NPT 3/4" M NPT 1/2" M NPT 3/4" M NPT 3/4" M NPT 1" M NPT 3/4" M NPT 1" M NPT 1" M NPT 1 1/4" M NPT 1 1/4" M NPT 1 1/2" M NPT 1 1/2" M NPT 2" M NPT 2" M NPT 1/8" F 90 NPT 1/8" F NPT 1/4" F 90 NPT 1/4" F NPT 1" F 90 NPT 1" F 282 Elbow 90 NPT M NPT F NPT 1/8" M 90 NPT 1/8" F NPT 1/8" M 90 NPT 1/4" F NPT 1/4" M 90 NPT 1/4" F NPT 3/8" M 90 NPT 1/4" F NPT 3/8" M 90 NPT 3/8" F NPT 3/8" M 90 NPT 1/2" F NPT 1/2" M 90 NPT 3/8" F NPT 1/2" M 90 NPT 1/2" F NPT 3/4" M 90 NPT 1/2" F NPT 3/4" M 90 NPT 3/4" F 283 Elbow 90 NPT M NPT M NPT 1/4" M 90 NPT 1/4" M NPT 3/8" M 90 NPT 1/2" M NPT 1/2" M 90 NPT 1/2" M NPT 1/2" M 90 NPT 3/4" M NPT 1" M 90 NPT 1" M NPT 1" M 90 NPT 1" M 481 T-adaptor NPT F F F x Thread NPT 1/8" F NPT 1/8" F NPT 1/8" F NPT 3/8" F NPT 3/8" F NPT 3/8" F NPT 1/2" F NPT 1/2" F NPT 1/2" F NPT 3/4" F NPT 3/4" F NPT 3/4" F 28

13 501 Plug G M 503 Inset plug G M Plug G 1/8" M Plug G 1/4" M Plug G 3/8" M Plug G 1/2" M Plug G 5/8" M Plug G 3/4" M Plug G 1" M Plug G 1 1/4" M Plug G 1 1/2" M Plug G 2" M Inset plug G 1/8" M Inset plug G 1/4" M Inset plug G 3/8" M Inset plug G 1/2" M Inset plug G 3/4" M Inset plug G 1" M Inset plug G 1 1/4" M Inset plug G 1 1/2" M Plug R M Inset plug UNF Plug R 1/8" M Plug R 1/4" M Plug R 3/8" M Plug R 1/2" M Plug R 3/4" M Plug R 1" M Plug R 1 1/4" M Plug R 1 1/2" M Plug R 2" M Inset plug 3/8"-24 UNF Inset plug /16"-20 UNF Inset plug 1/2"-20 UNF Inset plug 9/16"-18 UNF Inset plug 3/4"-16 UNF Inset plug /8"-14 UNF Inset plug 1 1/16"-12 UNF Inset plug 1 5/16"-12 UNF Inset plug 1 5/8"-12 UNF 502 Plug R FS 504 Inset plug M M Plug G 1/8" FS Plug G 1/4" FS Plug G 3/8" FS Plug G 1/2" FS Plug G 3/4" FS Plug G 1" FS Plug G 1 1/4" FS Plug G 1 1/2" FS Inset plug M 10 x 1.0 M Inset plug M 12 x 1.5 M Inset plug M 14 x 1.5 M Inset plug M 16 x 1.5 M Inset plug M 18 x 1.5 M Inset plug M 20 x 1.5 M Inset plug M 22 x 1.5 M Inset plug M 26 x 1.5 M Inset plug M 2 x 2.0 M Inset plug M 33 x 2.0 M Inset plug M 42 x 2.0 M 29

14 505 Plug NPT M Plug ROV S M M DIN Plug 1/8"-2 NPT M Plug 1/4"-18 NPT M Plug 3/8"-18 NPT M Plug 1/2"-14 NPT M Plug 3/4"-14 NPT M Plug 1"-11½ NPT M Plug 1 1/4"-11½ NPT M Plug 1 1/2"-11½ NPT M ROV 6 S M 14 x 1.5 M ROV 8 S M 16 x 1.5 M ROV 10 S M 18 x 1.5 M ROV 12 S M 20 x 1.5 M ROV 14 S M 22 x 1.5 M ROV 16 S M 24 x 1.5 M ROV 20 S M 30 x 2.0 M ROV 25 S M 36 x 2.0 M ROV 30 S M 42 x 2.0 M ROV 38 S M 52 x 2.0 M 506 Lock G F Lock G 1/8" IF Lock G 1/4" IF Lock G 3/8" IF Lock G 1/2" IF Lock G 5/8" IF Lock G 3/4" IF Lock G 1" IF Lock G 1 1/4" IF Lock G 1 1/2" IF Plug UNF M Plug /16" - 20 UNF Plug 9/16" - 18 UNF Plug 3/4" - 16 UNF Plug 1 1/16" - 12 UN Plug 1 5/16" - 12 UN Plug 1 5/16" - 12 UN Plug 1 /8" - 12 UN 3C14 48 Release ring Product group Plug ROV L M M DIN ROV 6 L M 12 x 1.5 M ROV 8 L M 14 x 1.5 M ROV 10 L M 16 x 1.5 M ROV 12 L M 18 x 1.5 M ROV 15 L M 22 x 1.5 M ROV 18 L M 26 x 1.5 M ROV 22 L M 30 x 2.0 M ROV 28 L M 36 x 2.0 M ROV 35 L M 45 x 2.0 M ROV 42 L M 52 x 2.0 M Part number Description No./Package 3C /4 Release ring 10 3C /8 Release ring 10 3C /2 Release ring 10 3C /4 Release ring 10 3C Release ring 10 3C14 49 Assembly stop Product group 300 Part number Description No./Package 3C /4 Assembly stop 10 3C /8 Assembly stop 10 3C /2 Assembly stop 10 3C /4 Assembly stop 10 3C Assembly stop

15 C Plug-in Female M G-threaded C Plug-in Female M SAE-O Part number Type Size Thread C Plug-in female 1/4" G 1/4" C Plug-in female 3/8" G 3/8" C Plug-in female 1/2" G 1/2" C Plug-in female 3/4" G 3/4" C Plug-in female 1" G 1" Part number Type Size Thread C Plug-in female 1/4" /16-20 C Plug-in female 3/8" 9/16-18 C Plug-in female 1/2" 3/4-16 C Plug-in female 1/2" /8-14 C Plug-in female 1/2" 1 1/16-12 C Plug-in female 3/4" 1 1/16-12 C Plug-in female 1" 1 5/16-12 C Plug Female C Plug female 1/4" C Plug female 3/8" C Plug female 1/2" C Plug female 3/4" C Plug female 1" C Plug-in Female M G-threaded Built-in rubber sealing Part number Type Size Thread C Plug-in female 1/4" G 1/4" C Plug-in female 3/8" G 3/8" C Plug-in female 1/2" G 1/2" C Plug-in kit Part number Type Size Thread C Plug-in kit 1/4" M 22 x 1.5 C Plug-in kit 3/8" M 24 x 1.5 C Plug-in kit 1/2" M 2 x 1.5 C Plug-in kit 3/4" M 36 x 1.5 C Plug-in Female M MM-threaded ISO Part number Type Size Thread C Plug-in female 3/8" M 12 x 1.5 C Plug-in female 3/8" M 16 x 1.5 C Plug-in female 1/2" M 18 x 1.5 C Plug-in female 3/4" M 22 x 1.5 C Plug-in female 3/4" M 2 x 2.0 C Plug male C14 84 Packing kit Female O-ring and support ring C Plug male 1/4" C Plug male 3/8" C Plug male 1/2" C Plug male 3/4" C Plug male 1" Part number Type Size C Packing kit female 1/4" C Packing kit female 3/8" C Packing kit female 1/2" C Packing kit female 3/4" C Packing kit female 1" 281