BITE TYPE FITTING N A J I N
|
|
- Barnaby Elliott
- 6 years ago
- Views:
Transcription
1 BIE YPE FIING
2 Bite ype Bite ype ube Fittings have been carefully designed and manu - factured to fill the rapidly increasing demand for tube fittings suitable for high pressure use Material Pressure Ranges O.(mm) C.Steel & S.Steel Brass Construction and Operation Bite type tube fittings are made up of three parts that are precision engineerd and machined : body, sleeve and nut. BOY, SHOUER, SEEVE, NU & UBE Body Shoulder Sleeve Nut ube Working emperature 1. For fitting materials Material emperature Steel -40 C to 120 C (IN 3859) Brass -60 C to 175 C Stainless Steel -60 C to 240 C (IN 17440) Note : temperature limits can greatly depend on the midium. Fig-1 2. For Elastomer seals When tightening nut, sleeve is driven forward on the tube then bites Material emperature the tube with the edge of sleeve. this is how sealing is achieved and NBR (e.g.perbunan ) -35 C to 100 C results in internal ridge inside the tube. FM (e.g.viton ) -25 C to 200 C PEF (e.g.efion ) -60 C to 240 C INERNA RIGE ON UBE Sleeve ube Note : When seal is used in the fitting, compare allowable working temperature between seal and fitting material and apply the lowest temperature Fig-2 Bite type tube fittings ratings and specifications are as follows. Material Specifications Parts Carbon Steel Stainless Steel Brass Forged Body JIS G4051 SUS316-SUS304 JIS H3250 S20C-S48C C3771 Bar stock Body JIS G4051 S20C-S48C SUS316-SUS304 JIS H3250 C3604 Cold Formed Nut JIS G4051 S10C-S20C SUS316-SUS304 Bar stock Nut JIS G4051 SUS316-SUS304 JIS H3250 S20C-S48C C3604 Sleeve JIS G4051 SUS316-SUS304 JIS H3250 S10C C3604 Pressure reduction with temperature Following Pressure reduction is applicable to the rating in the fitting material pressure range for the elevated temperatures. Material of fittings emperature Range Reduction of pressure Steel -40 C to 120 C - Brass -60 C to 175 C 30% Stainless Steel -60 C to 20 C - Stainless Steel 50 C 4% Stainless Steel 100 C 11% Stainless Steel 200 C 20% Stainless Steel 300 C 29% Stainless Steel 400 C 33% 90
3 Assembly Instruction Cutting the tube Cut tube squarely and lightly de-burr the end internally and externally. Sleeve Placement Slip nut and sleeve onto tubing. Be sure the long, straight end of the sleeve points toward tube end. Nut and sleeve on tube ube bottomed in fitting ROUBE SHOOING Problems with bite type hydraulic fittings are most often traced to faulty make up procedures. ook for the following. 1.ube not bottomed Check for the indentation on the tube end or compare length from end of tube to the front end of the sleeve of a known good assembly to that of the assembly in question. BIE YPE FIING 2.ack of bite Assembled with bite on tube Inspect for turned up ridge of material. A failure to achieve this ridge can be traced either to the fact that the nut was not tightened enough or that the tube was not bottomed against the stop which allowed the tube to travel forward with the sleeve. ubrication ightly lubricate threads on tool or body as well as the tail and lead end of the sleeve with an extreme friction lubricant. Pre-Setting Insert tube end into tool or fitting until it bottoms against the shoulder (to hold tube motionless during pre-setting operation) and screw nut down finger tight. Final setting Wrench nut down 1-1/4 turns to pre-set the sleeve (Reliable make up of all flareless tube fitting is dependent upon the sleeve traveling a prescribed distance into the tapered fitting throat in order to bite into the tube and effect a positive grip and seal. 3.Sleeve cocked on tube he sleeve is cocked on the tube when the tube assembly is off axis with that of the body. Generally this condition is caused by faulty tube bending. All bent tube assemblies should drop into the fitting body prior to make up. Reassemble for Final Installation Insert the tube into the fitting body and wrench the nut down easily until a sudden increase in torque is evident. From this point turn the nut an additional 1/4 to 1/3 turn (1-1/ 2 to 2 wrench flats) to again spring the sleeve into place to seal against the tubing and the fitting body. Inspection of Bite All bite type tube fittings must be disassembled and inspected for proper make-up before final assembly. etailed inspection procedures are outlined below and must be followed regardless of the method used to pre-set the sleeve to the tube. 4.Over-set sleeve oo much pressure or more than recommended turns from finger tight were used to pre-set ferrule, or the net was severely over-tightened in final assembly. his assembly should be scrapped 5.No bite If all of the above checks have been made and the sleeve still shows no sign of biting the tube, it may be that the tube is too hard. 91
4 Material Comparison ist Material Chemical Compositions C% Si% Mn% P% S% Products from hezagon bars are cold drawn, while fored ones are forged. ensile Strenght Kgf/mm² Mechanical Properties Yield Point Kgf/mm² Elongation % JIS G4051 S45C 0.42~ ~ ~ MAX MAX. 58(MIN.) 35(MIN.) 20(MIN.) AISI G 1045& SAE 1045 Hardness HB 167~229 Normalizing 0.43~ ~ ~ MAX MAX IN 1652 C ~ ~ ~ MAX MAX. 60(MIN.) 34(MIN.) 18(MIN.) 206(MIN.) Normalizing Applicable ube ist Selection from those lised below is recommended. hickness Otter dia. of tube 0.5 ± ± ± ± ±0.25 Remarks 1. he area enclosed by thick line indicates the specified range of tube thickness against the outer diameters.(johs ) 3.0 ± ±0.33 ± ± Without for some particular reasons, it is recommended to use thickness indicated by mark. 4.5 ± ± ±0.55 Basic dimension olerance Basic dimension olerance ±0.1 ±0.15 ± ± ±
5 1) Japanese Standards BIE YPE FIING Relevant standards for JOHS hydraulic line service for JIS B2351 bite type fitting for JIS G 3455 carbon steel pipes for high pressure service Quality characteristic OS 2 OS 2 SPS 1 SPS 2 SS 35 SS 38 C < ~0.18 <0.20 <0.08~ ~0.18 <0.25 Chemical compositions (%) Si Mn P S < ~0.60 <0.040 < ~ ~0.60 <0.035 <0.035 < ~0.60 <0.040 < ~ ~0.60 <0.035 < ~ ~0.60 <0.035 < ~ ~0.90 <0.035 <0.035 Cu <0.20 <0.20 <0.20 <0.20 ensile strength (kg/mm²) <45 <45 <45 <45 <35 <38 Yield point (kg/mm²) <18 <20 <18 <18 <18 <22 Mechanical property Elongation >35 >35 >30 >30 >35 (%) Hardness Bending test >20 Flattening test (1+e)t H= e+t/ Flaring test > >20 (1+e)t H= e+t/ Outside diameter (mm) ±0.10<22 28~35± ~50±0.20 ±0.10<22 28~35± ~50±0.20 ±0.10<25 30~38±0.15 ±0.10<25 30~38±0.15 ±0.8%,but minimum value is 0.3mm ±0.8%,but minimum value is 0.3mm imensional tolerance Wall thickness (mm) 0.5±20% 1.0~1.5±15% 10%> ±20% 1.0~1.5±15% 10%> ± ± %> ± ± %>2.0 For smaller than 2mm±0.20mm For over 2mm ±10% For smaller than 2mm±0.20mm For over 2mm ±10% ength (mm) < > <6000 > <6000 > <6000 > greater than specified length greater than specified length Inspection and test Eddy current flaw detection Water pressure test(kg/cm²) P=200S t/ P=200S t/ Note : In place of the water pressure test, the eddy current test shall be conducted and the result shall be equally guaranteed. 93
6 2) Foreign Standards SAE J524b AMS 5050F(E) JIC APPENIX- ANSI(NFPA) SMS IN 2391 C <0.18 < ~0.18 < Si Mn 0.30~ ~ ~ ~0.60 P <0.040 <0.040 <0.050 <0.040 S <0.050 <0.050 <0.055 <0.050 Cu ensile strength(kg/mm²) >31.6 <38.7 < ~45 Yield point (kg/mm²) >17.6 >17.6 >20.0 Elongation(%) >35 O<12.7>32 O>12.7>35 >35 >35 >25.0 Hardness <65 <65 <65 Flattening test Flaring test evelopment test H = 3 t H = 3 t H = 3 t t<7% 35% t>7% 45% engthwise pressure test Outside diameter <25.4 ±0.102 OVER 25.4~ 38.1±0.152 OVER 38.1~ 50.8±0.203 AMS ~12.7 ±0.076 OVER12.7~ 38.1±0.127 OVER ±0.254 <12.7 ±0.076 OVER 12.7~ 38.1±0.127 OVER 38.1~ 88.9±0.254 <10.00 ± ~30.0 ± ~40 ± ~12.7 <12.7 Inside diameter ±15% AMS2253 OVER12.7~ 38.1±0.127 OVER ±0.254 OVER 12.7~ 38.1±0.127 OVER 38.1~ 88.9±0.254 Eddy current flaw detection Water pressure test (kg/cm²) SAE : Society of automotive Engineers. AMS : Aerospace Material Specificantion. JIC : he Joint Industrial Congress(JIS Hydraulic S.) ANSI : American National Standards Institute. IN : German Industry Standards. 94
7 SBU Straight Union 96 SB Union Elbow 96 SB Union ee 97 SBBU Bulkhead Union 97 SBMC-R SBRM Male Run ee 104 SBOM O-Seal Male Elbow 104 SBF Female Elbow 105 SBCW Male Connector Welding Connector N 98 A J I 106 N SBBUW Male Connector Welding (For gasket) Bulkhead Union SBMC-G SBOM Male Connector (For O-Ring) 100 SBM Male Elbow 101 SBSM Banjo Elbow SBFC Female connector 105 SBA-R Adaptor 107 SBA-G Adaptor (For Copper Gasket) 107 SBR Reducer SBHUM Hose Male Union 110 SBHUF Hose Female Union 110 SBHBM Hose Bulkhead Male Union 111 SBHBF Hose Bulkhead Female Union 111 SBHM Hose Male Elbow 112 SBHF Hose Female Elbow 112 SBC Cap 113 SBP Plug 113 SBN Nut BIE YPE FIING 102 SBSM Banjo Elbow 102 SBBM Male Branch ee 103 SBBF Female Branch ee SBA Adjustable Elbow 108 SBBA Adjustable Branch ee 109 SBRA Adjustable Run ee SBS Sleeve
8 SBU Straight Union esignations ube O.. E H1 H i l SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU SBU-11 1/ SBU-13 1/ SBU-17 3/ SBU-21 1/ SBU-27 3/ N A SBU-34 J I 28 N SBU / SBU / SB Union Elbow esignations ube O.. E H1 H i l SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB-11 1/ SB-13 1/ SB-17 3/ SB-21 1/ SB-27 3/ SB SB / SB / All dimensions are in millimeters. imensions are for reference only, subject to change. 96
9 SB Bite ype ube Fittings Union ee esignations ube O.. E h H i l SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB-11 1/ SB-13 1/ SB-17 3/ SB-21 1/ SB-27 3/ SB SB / SB / BIE YPE FIING SBBU Bulkhead Union esignations ube O.. E H1 H i l Panel Hole rill size N All dimensions are in millimeters. imensio ns are for reference only, subject to change. Max.Panel hickness S SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU SBBU-11 1/ SBBU-13 1/ SBBU-17 3/ SBBU-21 1/ SBBU-27 3/ SBBU SBBU / SBBU /
10 SBMC -R Male Connector esignations ube O.. (P) All dimensions are in millimeters. imensions are for reference only, subject to change. E Basic Ruge length a H1 H i l SBMC R 6 1/ SBMC R 6 1/ SBMC R 6 3/ SBMC R 8 1/ SBMC R 8 1/ SBMC R 10 1/ SBMC R 10 3/ SBMC R 10 1/ SBMC R 12 1/ SBMC R 12 3/ SBMC R 12 1/ SBMC R 15 3/ SBMC R 15 1/ SBMC R 16 3/ SBMC R 16 1/ SBMC R 18 1/ SBMC R 20 1/ SBMC R 20 3/ SBMC R 22 1/ SBMC R 22 3/ SBMC R SBMC R SBMC R SBMC R / SBMC R / SBMC R / SBMC R / SBMC R / SBMC R / SBMC R 1/ / SBMC R 1/ / SBMC R 1/ / SBMC R 1/ / SBMC R 3/ / SBMC R 3/ / SBMC R 1/ / SBMC R 1/ / SBMC R 3/ / SBMC R 3/ SBMC R SBMC R / SBMC R 1-1/ / SBMC R 1-1/ / SBMC R 1-1/ / SBMC R 1-1/
11 SBMC Bite ype ube Fittings Male Connector (For gasket) -G esignations ube O.. (PF) SBMC G 6 1/ SBMC G 6 1/ SBMC G 8 1/ SBMC G 8 1/ SBMC G 10 1/ SBMC G 10 3/ SBMC G 12 1/ SBMC G 12 3/ SBMC G 12 1/ SBMC G 15 3/ SBMC G 15 1/ SBMC G 16 1/ SBMC G 18 1/ SBMC G 20 3/ SBMC G 22 1/ SBMC G 22 3/ SBMC G 25 3/ SBMC G SBMC G SBMC G SBMC G / SBMC G / N A SBMC G J /4 I N SBMC G / SBMC G / SBMC G / SBMC G 1/ / SBMC G 1/ / SBMC G 1/ / SBMC G 1/ / SBMC G 3/ / SBMC G 3/ / SBMC G 1/ / SBMC G 1/ / SBMC G 3/ / SBMC G 3/ SBMC G SBMC G / SBMC G 1-1/ / SBMC G 1-1/ / SBMC G 1-1/ / SBMC G 1-1/ All dimensions are in millimeters. imensions are for reference only, subject to change. E H1 H i l A l1 BIE YPE FIING 99
12 SBOM Male Connector (For O-Ring) esignations ube O.. (PF) E H1 H i A l1 l SBOM OR 6 1/ SBOM OR 6 1/ SBOM OR 8 1/ SBOM OR 8 1/ SBOM OR 10 1/ SBOM OR 10 3/ SBOM OR 12 1/ SBOM OR 12 3/ SBOM OR 12 1/ SBOM OR 15 3/ SBOM OR 15 1/ SBOM OR 16 1/ SBOM OR 18 1/ SBOM OR 20 3/ SBOM OR 22 3/ SBOM OR 25 3/ SBOM OR SBOM OR SBOM OR SBOM OR / SBOM OR / SBOM OR / N A SBOM OR J /2 I N SBOM OR / SBOM OR / SBOM OR 1/ / SBOM OR 1/ / SBOM OR 1/ / SBOM OR 1/ / SBOM OR 3/ / SBOM OR 3/ / SBOM OR 1/ / SBOM OR 1/ / SBOM OR 3/ / SBOM OR 3/ SBOM OR SBOM OR / SBOM OR 1-1/ / SBOM OR 1-1/ / SBOM OR 1-1/ / SBOM OR 1-1/ All dimensions are in millimeters. imensions are for reference only, subject to change
13 SBM Bite ype ube Fittings Male Elbow esignations ube O.. (P) Basic Gauge E E1 length h H i l a 1 SBM R 6 1/ SBM R 6 1/ SBM R 8 1/ SBM R 8 1/ SBM R 10 1/ SBM R 10 3/ SBM R 10 1/ SBM R 12 1/ SBM R 12 3/ SBM R 12 1/ SBM R 15 3/ SBM R 15 1/ SBM R 16 3/ SBM R 16 1/ SBM R 18 3/ SBM R 18 1/ SBM R 20 1/ SBM R 20 3/ SBM R 22 1/ SBM R 22 3/ SBM R 25 3/ SBM R N A SBM R J 28 3/4 I N SBM R SBM R SBM R / SBM R / SBM R / SBM R / SBM R / SBM R / SBM R 1/ / SBM R 1/ / SBM R 1/ / SBM R 1/ / SBM R 3/ / SBM R 3/ / SBM R 1/ / SBM R 1/ / SBM R 3/ / SBM R 3/ / SBM R SBM R SBM R 1-1/ / SBM R 1-1/ / SBM R 1-1/ / SBM R 1-1/ / All dimensions are in millimeters. imensions are for reference only, subject to change. BIE YPE FIING 101
14 SBSM Banjo Elbow esignations ube O.. (P) E E1 h H1 H i l1 l 1 2 B SBSM G 6 1/ SBSM G 8 1/ SBSM G 10 1/ SBSM G 12 3/ SBSM G 15 1/ SBSM G 16 1/ SBSM G 18 1/ SBSM G 20 3/ SBSM G 22 3/ SBSM G SBSM G SBSM G 1/ / SBSM G 1/ / SBSM G 3/ / SBSM G 1/ / SBSM G 3/ SBSM Banjo Elbow esignations ube O.. (P) E E1 h H1 H i l1 l 1 2 B SBSM G 6 1/ SBSM G 8 1/ SBSM G 10 1/ SBSM G 12 3/ SBSM G 15 1/ SBSM G 16 1/ SBSM G 18 1/ SBSM G 20 3/ SBSM G 22 3/ SBSM G SBSM G SBSM G 1/ / SBSM G 1/ / SBSM G 3/ / SBSM G 1/ / SBSM G 3/ All dimensions are in millimeters. imensions are for reference only, subject to change
15 SBBM Bite ype ube Fittings Male Branch ee esignations ube O.. (P) Basic Gauge E E1 length h H i l a 1 SBBM R 6 1/ SBBM R 6 1/ SBBM R 8 1/ SBBM R 8 1/ SBBM R 10 1/ SBBM R 10 3/ SBBM R 12 1/ SBBM R 12 3/ SBBM R 15 3/ SBBM R 15 1/ SBBM R 16 1/ SBBM R 18 1/ SBBM R 20 3/ SBBM R 22 3/ SBBM R 25 3/ SBBM R SBBM R SBBM R SBBM R / SBBM R / SBBM R / SBBM R / SBBM R / SBBM R 1/ / SBBM R 1/ / SBBM R 3/ / SBBM R 1/ / SBBM R 3/ SBBM R / SBBM R 1-1/ / SBBM R 1-1/ BIE YPE FIING SBBF Female Branch ee esignations ube O.. (P) E h H i l 1 SBBF R 6 1/ SBBF R 8 1/ SBBF R 10 1/ SBBF R 12 1/ SBBF R 12 3/ SBBF R 15 3/ SBBF R 15 1/ SBBF R 16 1/ SBBF R 18 1/ SBBF R 20 3/ SBBF R 22 3/ SBBF R 25 3/ SBBF R SBBF R SBBF R SBBF R / SBBF R / SBBF R / SBBF R 1/ / SBBF R 1/ / SBBF R 3/ / SBBF R 1/ / SBBF R 3/ SBBF R / All dimensions are in millimeters. imensions are for reference only, subject to change
16 SBRM Male Run ee esignations ube O.. (P) Basic Gauge E E1 length h H i l a 1 SBRM R 6 1/ SBRM R 6 1/ SBRM R 8 1/ SBRM R 8 1/ SBRM R 10 1/ SBRM R 10 3/ SBRM R 12 1/ SBRM R 12 3/ SBRM R 15 3/ SBRM R 15 1/ SBRM R 16 1/ SBRM R 18 1/ SBRM R 20 3/ SBRM R 22 3/ SBRM R 25 3/ SBRM R SBRM R SBRM R SBRM R / SBRM R / SBRM R / SBRM R / SBRM R / SBRM R 1/ / SBRM R 1/ / SBRM R 3/ / SBRM R 1/ / SBRM R 3/ SBRM R / SBRM R 1-1/ / SBRM R 1-1/ SBOM O-Seal Male Elbow esignations ube O.. (PF) E E1 h H1 H i l1 l 1 SBOM G 6 1/ SBOM G 8 1/ SBOM G 10 1/ SBOM G 12 1/ SBOM G 12 3/ SBOM G 12 1/ SBOM G 15 3/ SBOM G 15 1/ SBOM G 16 1/ SBOM G 18 1/ SBOM G 20 3/ SBOM G 22 3/ SBOM G 25 3/ SBOM G SBOM G SBOM G SBOM G / SBOM G / SBOM G / SBOM G / All dimensions are in millimeters. imensions are for reference only, subject to change
17 SBFC Bite ype ube Fittings Female Connector esignations ube O.. (P) E H1 H i l SBFC R 6 1/ SBFC R 8 1/ SBFC R 10 1/ SBFC R 10 3/ SBFC R 12 1/ SBFC R 12 3/ SBFC R 15 3/ SBFC R 15 1/ SBFC R 16 1/ SBFC R 18 1/ SBFC R 20 3/ SBFC R 22 3/ SBFC R 25 3/ SBFC R SBFC R SBFC R SBFC R / SBFC R / SBFC R / SBFC R / SBFC R / SBFC R / SBFC R 1/ / SBFC R 1/ / SBFC R 3/ / SBFC R 1/ / SBFC R 3/ SBFC R / SBFC R 1-1/ / SBFC R 1-1/ BIE YPE FIING SBF Female Elbow esignations ube O.. (P) E h H i l 1 SBF R 8 1/ SBF R 10 1/ SBF R 12 1/ SBF R 12 3/ SBF R 15 3/ SBF R 15 1/ SBF R 16 1/ SBF R 18 1/ SBF R 20 3/ SBF R 22 3/ SBF R 25 3/ SBF R SBF R SBF R / SBF R / SBF R / All dimensions are in millimeters. imensions are for reference only, subject to change
18 SBCW Welding Connector esignations ube O.. A E H1 H l i l1 SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW SBCW-11 1/ SBCW-13 1/ SBCW-17 3/ SBCW-21 1/ SBCW-27 3/ SBCW SBCW / SBCW / SBBUW Welding Bulkhead Union esignations ube O.. A E H l i SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW SBBUW-11 1/ SBBUW-13 1/ SBBUW-17 3/ SBBUW-21 1/ SBBUW-27 3/ SBBUW SBBUW / SBBUW / All dimensions are in millimeters. imensions are for reference only, subject to change
19 SBA-R SBA-G Bite ype ube Fittings Adaptor Adaptor (For Copper Gasket) esignations ube O.. (P) All dimensions are in millimeters. imensions are for reference only, subject to change. E Basic Gauge length a H l SBA R 6 1/ SBA R 8 1/ SBA R 10 1/ SBA R 10 3/ SBA R 12 1/ SBA R 12 3/ SBA R 15 3/ SBA R 15 1/ SBA R 16 1/ SBA R 18 1/ SBA R 20 3/ SBA R 22 3/ SBA R 25 3/ SBA R SBA R SBA R SBA R / SBA R / SBA R / SBA R / SBA R 1/ SBA R 1/ / N A SBA R 3/8 J /2 I 11 N SBA R 1/ / SBA R 3/ SBA R / SBA R 1-1/ / SBA R 1-1/ esignations ube O.. (P) E H A l1 l2 l3 SBA G 6 1/ SBA G 8 1/ SBA G 10 1/ SBA G 10 3/ SBA G 12 1/ SBA G 12 3/ SBA G 15 3/ SBA G 15 1/ SBA G 16 1/ SBA G 18 1/ SBA G 20 3/ SBA G 22 3/ SBA G 25 3/ SBA G SBA G SBA G SBA G / SBA G / SBA G / SBA G / SBA G 1/ / SBA G 1/ / SBA G 3/ / SBA G 1/ / SBA G 3/ SBA G / SBA G 1-1/ / SBA G 1-1/ BIE YPE FIING 107
20 SBR Reducer esignations ube O.. 1 E H1 H i l SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR SBR N A SBR J I 17 N SBR SBR SBR SBR SBR SBR SBR / / SBR / / SBR / / SBR / / SBR / / SBR / / SBR / / SBR / SBR / SBA Adjustable Elbow esignations ube O.. E E1 h H i l l1 1 SBA SBA SBA SBA SBA SBA SBA SBA SBA SBA SBA SBA All dimensions are in millimeters. imensions are for reference only, subject to change
21 SBBA Bite ype ube Fittings Adjustable Branch ee BIE YPE FIING esignations ube O.. E E1 h H i l l1 1 SBBA SBBA SBBA SBBA SBBA SBBA SBBA SBBA SBRA Adjustable Run ee esignations ube O.. E E1 h H i l l1 1 SBRA SBRA SBRA SBRA SBRA SBRA SBRA SBRA All dimensions are in millimeters. imensions are for reference only, subject to change
22 SBBUM Hose Male Union esignations ube O.. (PF) E H1 H i l SBBUM G 6 1/ SBBUM G 8 1/ SBBUM G 8 3/ SBBUM G 10 1/ SBBUM G 10 3/ SBBUM G 10 1/ SBBUM G 12 1/ SBBUM G 12 3/ SBBUM G 12 1/ SBBUM G 15 3/ SBBUM G 15 1/ SBBUM G 16 3/ SBBUM G 16 1/ SBBUM G 18 1/ SBBUM G 20 3/ SBBUM G 22 1/ SBBUM G 22 3/ SBBUM G 25 3/ SBBUM G SBBUM G 28 3/ SBBUM G SBBUM G 30 3/ SBBUM G SBBUM G SBBUM G / SBBUF Hose Female Union esignations ube O.. (PF) E H1 H i l SBBUF G 6 1/ SBBUF G 8 1/ SBBUF G 8 3/ SBBUF G 10 1/ SBBUF G 10 3/ SBBUF G 10 1/ SBBUF G 12 1/ SBBUF G 12 3/ SBBUF G 12 1/ SBBUF G 15 3/ SBBUF G 15 1/ SBBUF G 16 3/ SBBUF G 16 1/ SBBUF G 18 1/ SBBUF G 20 3/ SBBUF G 22 1/ SBBUF G 22 3/ SBBUF G 25 3/ SBBUF G SBBUF G 28 3/ SBBUF G SBBUF G 30 3/ SBBUF G SBBUF G SBBUF G / SBBUF G / SBBUF G / All dimensions are in millimeters. imensions are for reference only, subject to change
23 SBHBM Bite ype ube Fittings Hose Bulkhead Male Union esignations ube O.. (PF) Panel Hole Max Panel E H1 H i l rill size hickness 1 N S SBHBM G 6 1/ SBHBM G 8 1/ SBHBM G 8 3/ SBHBM G 10 1/ SBHBM G 10 3/ SBHBM G 10 1/ SBHBM G 12 1/ SBHBM G 12 3/ SBHBM G 12 1/ SBHBM G 15 3/ SBHBM G 15 1/ SBHBM G 16 3/ SBHBM G 16 1/ SBHBM G 18 1/ SBHBM G 20 3/ SBHBM G 22 1/ SBHBM G 22 3/ SBHBM G 25 3/ SBHBM G SBHBM G 28 3/ SBHBM G SBHBM G 30 3/ SBHBM G SBHBM G SBHBM G / BIE YPE FIING SBHBF Hose Bulkhead Female Union esignations ube O.. (PF) Panel Hole Max Panel E H1 H i l rill size hickness 1 N S SBHBF G 6 1/ SBHBF G 8 1/ SBHBF G 8 3/ SBHBF G 10 1/ SBHBF G 10 3/ SBHBF G 10 1/ SBHBF G 12 1/ SBHBF G 12 3/ SBHBF G 12 1/ SBHBF G 15 3/ SBHBF G 15 1/ SBHBF G 16 3/ SBHBF G 16 1/ SBHBF G 18 1/ SBHBF G 20 3/ SBHBF G 22 1/ SBHBF G 22 3/ SBHBF G 25 3/ SBHBF G SBHBF G SBHBF G 30 3/ SBHBF G SBHBF G SBHBF G / SBHBF G / SBHBF G / All dimensions are in millimeters. imensions are for reference only, subject to change
24 SBHM Hose Male Elbow esignations ube O.. (PF) E E1 h H i l l1 SBHM G 6 1/ SBHM G 8 1/ SBHM G 8 3/ SBHM G 10 1/ SBHM G 10 3/ SBHM G 10 1/ SBHM G 12 1/ SBHM G 12 3/ SBHM G 12 1/ SBHM G 15 3/ SBHM G 15 1/ SBHM G 16 3/ SBHM G 16 1/ SBHM G 18 1/ SBHM G 20 3/ SBHM G 22 1/ SBHM G 22 3/ SBHM G 25 3/ SBHM G SBHM G 28 3/ SBHM G SBHM G 30 3/ SBHM G SBHM G SBHM G / SBHF Hose Female Elbow esignations ube O.. (PF) E E1 h H i l l1 SBHF G 8 1/ SBHF G 8 3/ SBHF G 10 1/ SBHF G 10 3/ SBHF G 10 1/ SBHF G 12 1/ SBHF G 12 3/ SBHF G 12 1/ SBHF G 15 3/ SBHF G 15 1/ SBHF G 16 3/ SBHF G 16 1/ SBHF G 18 1/ SBHF G 20 3/ SBHF G 22 1/ SBHF G 22 3/ SBHF G 25 3/ SBHF G SBHF G 28 3/ SBHF G SBHF G 30 3/ SBHF G SBHF G SBHF G / SBHF G / SBHF G / All dimensions are in millimeters. imensions are for reference only, subject to change
25 SBC Cap Bite ype ube Fittings SBP Plug BIE YPE FIING esignations SBN ube O.. Nut H1 H i l SBC SBC SBC SBC SBC SBC SBC SBC SBC SBC SBC SBC SBC-32 esignations ube O.. d A l SBP SBP SBP SBP SBP SBP SBP SBP SBP SBP SBP SBP SBP SBS Sleeve esignations ube O.. H SBN-06 6 M12X SBN-08 8 M14X SBN M16X SBN M18X SBN M22X SBN M24X SBN M26X SBN M28X SBN M30X SBN M35X SBN M38X SBN M40X SBN M42X SBN M45X SBN M48X SBN M52X SBN M52X SBN-11 1/ M16X SBN-13 1/ M20X SBN-17 3/ M26X SBN-21 1/ M30X SBN-27 3/ M38X SBN M45X SBN / M52X SBN / M60X esignations ube O.. SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS-11 1/ SBS-13 1/ SBS-17 3/ SBS-21 1/ SBS-27 3/ SBS SBS / SBS /
T-ADAPTORS. Technical specification adaptors PRODUCT CATALOGUE 2009
Adaptors Table of contents Hydroscand can offer a wide range of adaptors (connector nipples) for different purposes such as: transformation between small and large thread dimensions; swivel transformation
More informationStainless One-touch Fittings. Applicable Tubing. Tubing material Tubing O.D. Note 1) Soft nylon tubing is not compatible with water.
Stainless One-touch Fittings Series KG os Guide Collet Chuck Suitable for use with nylon and urethane. Large retaining force. as large retaining force while holding force is increased by the collet. elease
More informationStainless Steel One-touch Fittings. Applicable Tubing. Tubing material Tubing O.D. Note 1) Soft nylon tubing is not compatible with water.
Guide Collet Chuck Suitable for use with nylon and urethane. Large retaining force. The chuck provides secure retention and the collet increases the holding force on the tube. Seal Can be used for a wide
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications
Series -KG Stainless One-touch fittings Construction Guide Collet Chuck Large retaining force as large retaining force while holding force is increased by the collet. elease button (White) Light force
More information83A series Aluminium (light weight) compression fittings Ø 1/ nominal pipe size, NPT thread
83A series Aluminium (light weight) compression fittings Ø /8... 2 nominal pipe size, NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade
More information83A series Aluminium (light weight) compression fittings
> > Port size: Ø /8... 2, NPT thread > > For use in areas of vibration > > Pre-assembled units > > No special assembly tools or heat required > > an be remade without damage to tube > > Suitable for use
More informationNatural Gas.
Natural Gas www.chicagofittings.com Features and Benefits 2 Meter Set Risers 4 Service Head Adapters 85 Series 87 Series 89 Series 91 Series Adapters Plastic Service Products 597 Series 557 Series 575
More informationTechnical Characteristics
0912 /Metric DD44BKTL 0921 Metric 0913 0922 Metric 0914 BSPT 0910 0911 0915 /Metric 0923 Metric 0916 0924 Metric 0917 0927 BSPT 0928 0932 0908 0909 KRRS3 BSPT 0903 /BSPT 0904 Page 9-18 0905 /Metric Page
More information(REV) 2000 Dayco Products, Inc.
TRI PTRS YO SPIL PTRS YO TU PTRS YO SUP PTRS YO SUPRFLR PTRS MTRI PTRS YO SPIL TRI PTRS YO SPIL PTRS YO TU PTRS YO SUP PTRS YO SUPRFLR PTRS MTRI PTRS YO SPIL TRI PTRS YO SPIL PTRS YO TU PTRS dapters YO
More informationMeter Risers, Fittings & PE Pipe for Underground Gas Applications
for: Pool Heaters & Spas for: Gas Grills for: Patio Hearths & Lighting for: Emergency Generators Meter Risers, Fittings & PE Pipe for Underground Gas Applications Online Training & Certification at wal-rich.com
More informationFiber-Optic Accessories
Fiber-Optic Accessories Various Accessories Expand the Usefulness of the Fiber-Optic Cables Lenses extend sensing distances Side-view attachments provide space savings Flexible stainless steel tubes protect
More informationWard Manufacturing Pipe Fittings Catalog
Ward Manufacturing Pipe Fittings atalog www.wardmfg.com (800) 248-1027 Ward s mission is profitable growth by exceeding customer expectations through innovation, quality and commitment. TLE OF ONTENTS
More informationTool holders from Sandvik Coromant. Hydro-Grip. Assortment of high precision chucks
Tool holders from Sandvik Coromant Hydro-Grip Assortment of high precision chucks * up to three times the force of conventional chucks Hydro-Grip high precision tool holders are your guarantee of secure
More informationUpgrade KIT IV Operation Manual
Upgrade KIT IV Operation Manual Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference. Before you start It is important to perform
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (EVMG), AISI 304 stainless steel (EVM), AISI 316 stainless steel (EVML). APPLICATIONS Civil, industrial, agricultural
More informationCOMPRESSION FITTINGS
2 COMPRESSION FITTINGS 112 PE Polyethylene TECHNICAL INFORMATION THE MATERIAL: BODY IN BLACK PP NUT IN LIGHT BLUE ACETAL COPOLYMER POM GASKET IN NBR 70 SHORE SPLIT RING IN WHITE POLYACETAL FIELD OF USE:
More informationTRUCK PUMPS HYDRAULIC GEAR PUMPS
TRUCK PUMPS HYDRAULIC GEAR PUMPS FEATURES KAPPA 30 and KAPPA 35 hydraulic gear pumps with high strength body for truck applications. SAE B mounting flange allows the pumps to be mounted directly on the
More informationMidwest Metal Fabricators LLC 712 Maple Street Wapakoneta, OH Phone (419) Fax (419)
+ If you are looking for cost-competitive round duct and fittings shipped to your schedule, Midwest Metal Fabricators, LLC is your supplier of choice. We offer a large selection of round ductwork fabricated
More informationU xafaiagy10258nzw BLUING TANK STAND SYSTEM INSTRUCTIONS WARNING SETTING UP THE BLUING STANDS HEIGHT OF BURNERS GAS LINES FINAL SETUP #
BLUING TANK STAND SYSTEM SAVE THESE INSTRUCTIONS IN YOUR BROWNELLS GUNSMITHS DATA RING BINDER The Brownells Bluing Tank Stand System was developed by professional gunsmiths and design engineers to provide
More informationPLAIN MILLING CUTTERS
PLAIN MILLING CUTTERS INTERLOCKING SIDE MILLING CUTTERS N300 PLAIN TYPE Teeth out of line N350 STAGGERED TOOTH TYPE Using two standards and grind hubs N400 PLAIN TYPE General purpose application N500 STAGGERED
More informationCELLO PRODUCTS INC. "The New Choice" ISO 9002 N S F 61* * wrot copper products. Stainless Steel Fittings & Nipples
. "The New Choice" ISO 9002 N S F 61* * wrot copper products Stainless Steel Fittings & Nipples USA Price List #1 Effective October 10, 2016 PRICE LIST CANADA U.S.A. 210 Avenue Road Cambridge, Ontario
More informationDIMENSION IN MM OF FORGED SCREWED FITTINGS TO ANSI B THREADED TO ASA B 2.1 SOCKET WELD FITTING TO ANSI B-16.11
IMNSION IN MM OF FORG SRW FITTINGS TO NSI -16.11 THR TO S 2.1 9 OWS T 45 OW UNION F OUPING G H PIP P K H USHING I J HX H PUG HF OUPING =G/2 NOM PIP 3..S. OMMON FTORS 6..S OR O.. G H K F I J G H K 1/8"
More informationSC500 53B. Model: SC B NIL. Part List US-English
Model: SC500 53 B NIL Part List US-English Table of Contents GENERAL VIEW 3 SOLUTION TANK 5 RECOVERY TANK 7 MOTOR DRIVE 9 PADDLE AND DASHBOARD 11 REAR WHEELS 13 SQUEEGEE SYSTEM 15 DISC DECK 17 ELECTRICAL
More informationINSTALLATION GUIDE. Pot filler faucets. PF 3100 Ambient Series. PF 3200 Logik Series. PF 3300 Farm House Series
INSTALLATION GUIDE Pot filler faucets PF 3100 Ambient Series PF 3200 Logik Series PF 3300 Farm House Series TECHNICAL DATA Standard water flow 2.2 gpm - 60 PSI Recommended pressure range 7.5-70 PSI has
More informationCELLO PRODUCTS INC. "The New Choice" ISO 9002 N S F 61* * wrot copper products. C Press Fittings. USA Price List #3 Effective March 1, 2017
. "The New Choice" ISO 9002 N S F 61* * wrot copper products C Press Fittings USA Effective March 1, 2017 PRICE LIST CANADA U.S.A. 210 Avenue Road Cambridge, Ontario N1R 8H5 Telephone: (519) 621-9150 Fax:
More informationPoultry Watering Systems Catalogue
Poultry Watering Systems Catalogue 2012 G l o b a l P r e s e n c e - L o c a l C o m m i t m e n t Best Results With a Full, Flexible Range of Flow Rates List of Parts per 3m (10 ) Section Nylon Cord
More informationS Fault Indicators. S.T.A.R. Type CR Faulted Circuit Indicator Installation Instructions. Contents PRODUCT INFORMATION
Fault Indicators S.T.A.R. Type CR Faulted Circuit Indicator Installation Instructions Service Information S320-75-1 Contents Product Information..........................1 Safety Information............................2
More informationHillside Cultivator Co. LLC Prices and Parts
Hillside Cultivator Co. LLC Prices and Parts Call or Email to Order 911 Disston View Dr. Lititz, PA 17543 Cell 717-669-3158 www.hillsidecultivator.com Email: shenkberryfarm@gmail.com Hillside Cultivator
More informationPremium Carbide Burrs
SA Style Cylinder Shape - No End Cut.... 87 SB Style Cylinder Shape - with End Cut.... 87 SC Style Cylinder Shape - Radius End.... 88 SD Style Ball Shape.... 88 SE Style Oval / Egg Shape... 89 SF Style
More informationSECTION 1 Standard Malleable Pipe Fittings Class 150
STION 1 Standard Malleable Pipe Fittings lass 150 Ward lass 150 Malleable Iron Fittings are made with the most sophisticated metallurgical and processing controls available. Iron samples are continuously
More informationType Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread # of Contacts 1 to to 55 1 to 55 1 to 130
M Series SMALLER, LIGHTER-WEIGHT ALTERNATIVE FOR D PERFORMANCE M SERIES Amphenol M micro-miniature connectors are a small, lightweight option for mil-spec performance that can withstand harsh environments.
More informationPoultry Watering Systems Catalogue
Poultry Watering Systems Catalogue 2009 G l o b a l P r e s e n c e - L o c a l C o m m i t m e n t Best Results With a Full, Flexible Range of Flow Rates List of parts per 3m (10 ) section Nylon Cord
More informationN-2 EDS Factory Sealed and EFS Tumbler Switches: Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
-2 EDS Factory Sealed and EFS Tumbler Switches: Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power
More informationEPIC Industrial connectors
EPIC H-A Inserts 450 EPIC STA inserts 453 EPIC H-Q 5 / H-D 8 Inserts 456 EPIC H-D Inserts 457 EPIC H-DD Inserts 462 EPIC H-BE Inserts 465 EPIC H-EE Inserts 471 EPIC H-BS Inserts 474 EPIC H-BVE Inserts
More informationRELIA-FLOW and STEADI-FLOW Nipple Drinking Systems and Accessories
RELIA-FLOW and STEADI-FLOW Nipple Drinking Systems and Accessories Stainless Steel Parts Stainless Steel Parts STEADI-flow Nipple Drinker relia-flow Nipple Drinker sm Chore-Time s Drinkers Provide a Reliable
More informationTubeclip range of clamps and fittings Ideally suited for Agriculture, Theatre, Shop Fitting, Horticulture and many other applications.
Tubeclip range of clamps and fittings Ideally suited for Agriculture, Theatre, Shop Fitting, Horticulture and many other applications Catalogue 2019 Bromyard Road Ledbury Herefordshire HR8 1LG sales@tubeclip.co.uk
More informationPremium Carbide Burrs
SA Style Cylinder Shape - No End.... 106 SB Style Cylinder Shape - with End.... 106 SC Style Cylinder Shape - Radius End.... 107 SD Style Ball Shape.... 107 SE Style Oval / Egg Shape... 108 SF Style Tree
More informationComplete Range of Watering Systems for Breeders & Pullets
Range of Watering Systems for Breeders & Pullets 2012 G l o b a l P r e s e n c e - L o c a l C o m m i t m e n t P l a s s o n O f f e r s Y o u W o r l d C l a s s N i p p l e S Optimum performance Plasson
More informationFlame Shape SJ Style. 60º Cone Shape SK Style. 90º Cone Shape SL Style. Taper Shape Radius - 14º Included Angle...
SA Style Cylinder Shape - No End...... 104 SB Style Cylinder Shape - with End..... 104 SC Style Cylinder Shape - Radius End...... 105 SD Style Ball Shape..................... 105 SE Style Oval / Egg Shape...............
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS PANNIER CASE (Wave key type) P/N 08L72-MJP-A60 CRF1000L/LD Honda Dealer: Please give a copy of these instructions to your customer. MII 15641
More informationRaccordo diritto a calzamento Straight push-on fitting Ø n m RG.RO-1376-AS
RG RG. Raccordo diritto a calzamento Straight push-on fitting n m RG.RO-1376-S1 4 10 50 3 2 9 2.8 2.8 CH5 3 16 M3 1.2 Raccordo orientabile a a calzamento djustable-position push-on elbow fitting n m RG.RO-1376-S2
More informationAquaReef 200. Instruction Manual
AquaReef 00 Instruction Manual Congratulations, you have purchased one of the finest quality aquariums available. This product will give you many years of excellent service when installed and maintained
More informationConnection Size (in 1/ 8 )
EMERSON CLIMATE TECHNOLOGIES-System Protectors HMI-Hermetic Moisture Indicators The HMI is designed to provide an accurate method of determining the moisture content of a system s refrigerant. The HMI
More informationVEP SERIES THREADED FLAT FACE COUPLERS
VEP SERIES THREADED FLAT FACE COUPLERS The VEP Series is a popular solution for hydraulic circuit applications subject to high-pressure impulses and circuits which experience high residual or trapped pressure
More informationSIZING THE DAM BUSTER RAINHEAD
1 P a g e SIZING THE DAM BUSTER RAINHEAD 1 Size the catchment area by referring to the Dam Buster Design Guide. Follow Step 1, Step 2 and Step 3 to determine the roof catchment area design flow rate in
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publication No. SADDLEBAG SET (Wave key type) MII 14983 P/N 08L70-MJM-A10ZA P/N 08L70-MJM-A10ZB VFR800F/D Issue Date June 2014 PARTS LIST (2) (1) (3) 1 (Wave
More informationPhotographic & Measurement Comparison
Photographic & Measurement Comparison CAT (GEN III) vs. F-CAT Introduction: 1. The Element Cat (E-CAT) is a very carefully made counterfeit CAT tourniquet. 2. It is manufactured in Hong Kong for $8.50
More informationSTANDARD WARRANTY 1 INSERT FITTINGS 3-8 GRAPE STAKE MOUNT 8 DURA PLASTIC PRODUCTS, INC. P.O.BOX EAST THIRD STREET BEAUMONT, CA 92223
PVC INSERT STANDARD WARRANTY 1 INSERT FITTINGS 3-8 GRAPE STAKE MOUNT 8 PVC Inser t Fittings DURA PLASTIC PRODUCTS, INC. P.O. 2097 533 EAST THIRD STREET BEAUMONT, CA 92223 2 (Insert) 1401-005 10633 1/2
More informationElectromagnetic flowmeters. dg: NEW. Sensors MUT 2200 EL / MUT 2500 EL DS100-4-ENG 1/14
Electromagnetic flowmeters dg: www.oryana.com.ar EW Sensors MUT 2 EL / MUT EL DS--EG 1/1 Sensors MUT 2 EL / MUT EL MUT 2 EL / MUT EL sensors represent the state of the art of EUROMAG ITERATIOAL production
More informationDrinking Systems for Breeders & Pullets
Drinking Drinking Systems for Breeders & Pullets Global Presence Local Commitment Feeding Drinking Climate Housing Nipple Systems for Breeders & Pullets Plasson provides a full range of nipple systems
More informationSmart Drive Electronic Washing Machine. Models GW503 GW603 GW703 GWC03 GWL03 GWM03 KE993 LW035 MW053 THL03
Smart Drive Electronic Washing Machine Models GW503 GW603 GW703 GWC03 GWL03 GWM03 KE993 LW035 MW053 THL03 479101 August 1997 Reprinted 7 August, 2000 PRODUCTS Brand Fisher & Paykel, Frigidaire, Kelvinator,
More informationAugust 14, Addendum No. 1. for. Chicago Standard Gate Valves and Accessories. Specification No A. RFQ No. 4608
August 14, 2014 Addendum No. 1 for Chicago Standard Gate Valves and Accessories Specification No. 115734A RFQ No. 4608 For which bids are scheduled to open in the Bid & Bond Room 301, City Hall, 121 N.
More informationSAFETY BURNDY HYPRESS TM OPERATING & MAINTENANCE INSTRUCTIONS Y750BH 2004 FCI USA INC.
SAFETY OPERATING & MAINTENANCE INSTRUCTIONS BURNDY HYPRESS TM Y750BH 2004 FCI USA INC. 1 TABLE OF CONTENTS Warranty... 1 Safety Information... 2 Description... 3 Features & Benefits... 3 Specifications
More informationDesign Guide. You can relax with a INSTALLATION QUALITY,CERTIFIED QTANK POLY RAINWATER TANKS. qtank.com.au
INSTALLATION Design Guide A division of QSolutions Co POLY RAINWATER TANKS You can relax with a QUALITY,CERTIFIED QTANK qtank.com.au sales@qsolutionsco.com.au (07) 3881 0208 THE FOLLOWING GUIDELINES APPLY
More informationPIGEON MAGNET INSTRUCTION MANUAL
THE PIGEON MAGNET INSTRUCTION MANUAL Version 1. November 2012 Code 07-Trap10 Product Pigeon Magnet Trap Optional Accessories (sold separately): 07-trap9c Pigeon Magnet Storage Bag 07-trap9f Pigeon Magnet
More informationCOOPER POWER SERIES. S.T.A.R. PATHFINDER variable trip TPR faulted circuit indicator installation instructions. Fault indicators MN320003EN
Fault indicators MN320003EN Effective March 2017 Supersedes July 2004 (S320-42-1) COOPER POWER SERIES S.T.A.R. PATHFINDER variable trip TPR faulted circuit indicator installation instructions Indicator
More informationHALE SECURITY PET DOOR CAT GUARDIAN patent pending
HALE SECURITY PET DOOR CAT GUARDIAN patent pending The Cat Guardian is an electronics package that can be added to a Hale Pet Door door or wall model of at least 1 3 / 8 thick to allow dogs free passage
More informationCELLO PRODUCTS INC. "The New Choice" ISO 9002 N S F 61* * wrot copper products. Wrot Copper, Cast Brass, & Bar Stock Solder-Joint Fittings
. "The New Choice" ISO 9002 N S F 61* * wrot copper products Wrot Copper, Cast Brass, & Bar Stock Solder-Joint Fittings USA Price List #17 Effective January 1, 2017 PRICE LIST CANADA U.S.A. 210 Avenue
More informationCELLO PRODUCTS INC. "The New Choice" ISO 9002 N S F 61* * wrot copper products. Wrot Copper, Cast Brass, & Bar Stock Solder-Joint Fittings
. "The New Choice" ISO 9002 N S F 61* * wrot copper products Wrot Copper, Cast Brass, & Bar Stock Solder-Joint Fittings USA Price List #18 Effective September 21, 2017 PRICE LIST CANADA U.S.A. 210 Avenue
More informationXL³ 800 IP 55metal distribution cabinets, freestanding enclosures and cable compartments
XL³ 800 IP 55metal distribution cabinets, freestanding 87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 Cat. No(s) : 20451/52/53/54/56/57/58/59/73/74 CONTENTS PAGE 1. General characteristics...
More informationLaurelview Dog Kennel
Laurelview Dog Kennel Assembly Instructions FAILURE TO FOLLOW INSTRUCTIONS STEP BY STEP COULD RESULT IN LONGER INSTALLATION TIME HBK11-13659 5'(W) x 5'(L) x 5'(H) Important Safety Information Explanation
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance Momentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More informationBenefits of BRIGHT-TOOLS
(No Machine Purchase Required) Benefits of BRIGHT-TOOLS Cat 40 Balanced to G2.5-20,000 RPM Cat 50 Balanced to G6.3-15,000 RPM Taper Tolerance - AT3 or Better 56-58 HRC Hardness Balanced on Haimer Machines
More informationProsthetic Feet. Geriatric-Foot, light, 10 mm heel
In the course of human evolution from quadruped to biped, the healthy foot has decisively changed in its function and complexity. It is the load-bearing element of the body. A high number of receptors
More informationDRAFT TANZANIA STANDARD
Hatching eggs Specification DRAFT TANZANIA STANDARD TANZANIA BUREAU OF STANDARDS 1 Hatching eggs Specification TBS/AFDC 22 (5271) P3 0 FOREWORD This Tanzania standard was developed due to rapid increase
More informationArch Metal Aquarium Stand - 10 / / E ASY A SSEMBLY I NSTRUCTIONS AND P ARTS L IST
Arch Metal Aquarium Stand - 10 / 10-20 / 20-29 E ASY A SSEMBLY I NSTRUCTIONS AND P ARTS L IST 85210 Rev A 4/07 THANK YOU FOR PURCHASING THIS QUALITY PIECE OF FURNITURE. MARCO GROUP, INC. IS DEDICATED TO
More informationSMT FINGER PRODUCT. Many different shape of SMT metal parts :
www.alink.com.tw SMT FINGER PRODUCT Many different shape of SMT metal parts : Manufacturing technology - Stamping machine - Multi-Slide machine Designing & Testing - Finite element analysis - Automatic
More information7335 Royal Harbour, Oolteweh, TN Phone: (423) Fax: (423) Owner s Manual For Small-Size Wheelchair ( lbs)
7335 Royal Harbour, Oolteweh, TN 37363 Phone: (423) 299-8503 Fax: (423) 443-4329 Owner s Manual For Small-Size Wheelchair ( 15-40 lbs) Best Friend Mobility Rehabilitation Aids Dear Pet Owner and Valued
More informationROUGH TERRAIN CRANE GR-120NL GR-120N
ROUGH TERRAIN CRANE GR-120NL GR-120N (Standard Jib) JAPANESE SPECIFICATIONS CARRIER MODEL OUTLINE SPEC. NO. GR-120NL 12 t hook X-type Outrigger GR-120N-2-00101 GR-120NL 12 t hook H-type Outrigger GR-120N-2-00102
More informationpet containment product catalog petsentinelproducts.com
pet containment product catalog petsentinelproducts.com QUALITY BEGINS AT THE ORIGIN POINT WIRE FENCE & NETTING RESIDENTIAL FENCE PET CONTAINMENT LAWN & GARDEN - DECOR PLANT SUPPORT PRODUCTS SCREEN & ACCESSORIES
More informationCELLO PRODUCTS INC. "The New Choice" ISO 9002 N S F 61* * wrot copper products. No Lead Cast Fittings. CANADA Price List #2 Effective March 15, 2016
CELLO PRODUCTS INC. "The New Choice" ISO 9002 N S F 61* * wrot copper products No Lead Cast Fittings CANADA Price List #2 Effective March 15, 2016 PRICE LIST CANADA U.S.A. 210 Avenue Road Cambridge, Ontario
More informationCHAINS AND SPROCKETS FOR SUGAR INDUSTRY. ISO Metric a CROMANT chain company
CINS N SROCKS FOR SUGR INUSRY ISO Metric 2017 a CROMN chain company Cobalt Chains is YOUR source for quality chains and components for the Sugar Industry. In 2004, Cobalt Chains, Inc. was opened in ast
More informationXL³ 400 class II insulated distribution cabinets and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL³ 400 class II insulated distribution CONTENTS PAGE 1. General characteristics...1 2. Finish...1 3. Range...2 4. Overall dimensions...2
More informationDistributed by: Scotch-Brite Bristle Discs and Brushes. Patented abrasives. Safer operation and conformability in contoured areas.
Distributed by: Scotch-Brite Bristle Discs and Brushes Patented abrasives. Safer operation and conformability in contoured areas. Why choose the revolutionary Scotch-Brite Bristle Discs and Brushes? Long
More informationAll rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and
More informationAGILITY OBSTACLE GUIDELINES
FEDERATION CYNOLOGIQUE INTERNATIONALE (AISBL) Place Albert 1 er, 13 B 6530 Thuin, tel : +32.71.59.12.38, fax : +32.71.59.22.29, internet : http://www.fci.be AGILITY OBSTACLE GUIDELINES January 1 2018 TABLE
More informationDURA PLASTIC PRODUCTS, INC.
TM BSPT FITTINGS CORPORATE OFFICES AND FACTORY PO 2097 533 EAST THIRD STREET BEAUMONT, CA 92223 (951)845-3161 FAX (951)845-7644 Dura Plastic Products, Inc. (" Sellers ") warrants to the original Buyer
More information7200 Interstate 20 Kennedale, TX Kennedale (214) Toll Free Fax (214)
H & O DIE SUPPLY, INC. PRECISION ABRICATING MACHINERY 7200 Interstate 20 Kennedale, TX 76060 Kennedale (214) 630-6660 Toll ree 1-800-222-5441 ax (214) 630-6693 Email: sales@hodie.com Web Site: www.hodie.com
More informationInstallation Instructions
ARB Distributing, LLC TropicalFishStore.com PO Box 9002, Grand Rapids, MI 49509, ph 616-534-5050 Toll Free: 1-866-398-9598 Installation Instructions Thank you for the purchase of The Pearl, the first model
More informationHADDENHAM CUSTOM MEASUREMENT INSTRUCTIONS
HADDENHAM CUSTOM MEASUREMENT INSTRUCTIONS Contents LOWER LIMB Length Measurements 6 Circumference Measurements 10 Additional Measurements for Tights 12 TOE CAPS Length Measurements 16 Circumference Measurements
More informationILLUSTRATED PARTS LIST. 28cc and 32cc GAS POWERED CURVED SHAFT STRING TRIMMERS MARCH P.O. Box Tucson, Arizona U.S.A.
28cc and cc GAS POWERED CURVED SHAFT STRING TRIMMERS ( )SERIAL MODEL NUMBER MODEL ENGINE NAME PREFIX NUMBER SIZE DRIVE SHAFT HANDLE MT10 - - 28cc DIRECT D MT - - cc CLUTCH 8 D MAC 18L - 001- cc CLUTCH
More information303 Stainless Steel Screws..50 UNM Page 2.80 UNM 2.90 UNM UNM UNM
.50 UNM Page 2.80 UNM 2.90 UNM 2 1.00 UNM 3 1.20 UNM 3 0000-160 4 000-120 4 00-90 4 0-80 5 1-72 5 2-56 5 000-120 Page 6 00-90 6 0-80 7 1-72 7 2-56 8 Brass Nuts 9 Stainless Steel Nuts 9 1 P a g e .50 UNM
More informationGetting Started. Device Overviews. Setting Up the Pro 550 System Before you can use the Pro 550 system, you must set up the devices.
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Pro 550 System Before you can use
More informationReproMatic & FluxxBreeder
ReproMatic & FluxxBreeder the feeding system for broiler breeders REPROMATIC the feeding system especially for broiler breeders REPROMATIC is a feeding system developed by Big Dutchman to ideally meet
More informationYour American Made Source
Your American Made Source TERMS AND CONDITIONS OF SALE PRICE & PAYMENT The prices are subject to change based on prices in effect on the date of shipment. Interest at the rate of 1.5% per month shall be
More informationELMED. Pediatric Laparoscopy Catalog WE DESIGN, MANUFACTURE & SELL THE TOOLS THE SURGEONS USE
ELMED Serving The Medical Profession Since 1955 Pediatric Laparoscopy Catalog WE DESIGN, MANUFACTURE & SELL THE TOOLS THE SURGEONS USE We subscribe to Cost Containment and Protection of the Environment.
More informationDelta Upland XC. Owner s Manual. March 2015 Printed in Taiwan _0A
Delta Upland XC Owner s Manual March 2015 Printed in Taiwan 190-01876-00_0A All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent
More informationReproMatic & FluxxBreeder
ReproMatic & FluxxBreeder The feeding system developed specifically for broiler breeders ReproMatic the feeding system for broiler breeders ReproMatic is a Big Dutchman feeding system which was developed
More informationIEEE Std 592 Test Program using Current Cable Accessories and Installation Practices
IEEE Std 592 Test Program using Current Cable Accessories and Installation Practices Thomas J. Parker GTRC 1 Notice a. The material contained herein is, to our knowledge, accurate and reliable at the date
More informationCELLO PRODUCTS INC. "The New Choice" I SO 9002 N S F 61* * wrot copper products. Cast Copper Solder-Joint Fittings. Price List # CAST 10-4
. "The New Choice" I SO 9002 N S F 61* * wrot copper products Cast Copper Solder-Joint Fittings Effective November 1, 2010 PRICE LIST CONTENTS Pressure Fittings... 2-5 Drainage Fittings... 6-9 Representation...
More informationINSPECTION CERTIFICATE
CERTIFICATE NO.: WYYK1344-01 PAGE: 1/16 DATE: 2007-10-05 CUSTOMER :BP EGYPT ORDER NO. :EGY-040-NOV06 ITEM NO. 1 SHIPPER :SUMITOMO CORPORATION 057 KEB 6074/3 7P11S250001 COMMODITY :SEAMLESS STEEL TUBING
More informationVibratory Tumbler OWNER S MANUAL
Vibratory Tumbler OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information3-54 DUCTILE IRON FLANGED FITTINGS
dba 3-54 DUCILE ION FLNGED FIINGS NSI/WW C110/21.10 GENEL SPECIFICIONS MEIL : PESSUE : ESING : LYING LENG : WEIGS : DILLING : CEMEN LINING : COING : PPOVLS : Ductile Iron per SM 536. Grade 70-50-5. 250
More informationOWNER S MANUAL For extra small-size wheelchair (0-15 lbs)
Give a New Leash on Life OWNER S MANUAL For extra small-size wheelchair (0-15 lbs) INTRODUCTION PRODUCT INFORMATION HOW TO MEASURE PARTS LIST PARTS IDENTIFICATION WHEELCHAIR USE CARE AND MAINTENANCE FITTING
More informationFCI Molded Products Inc. VOL 1.0
EXCEEDING EXPECTATIONS Since FCI Molded Products amalgamation into The Accurate Group of Companies in 1990, we ve always gone the extra-mile for our customers. We provide quality products, competitive
More informationOWNER S MANUAL For large-size wheelchair ( lbs)
Give a New Leash on Life OWNER S MANUAL For large-size wheelchair (60-100 lbs) INTRODUCTION PRODUCT INFORMATION HOW TO MEASURE PARTS LIST PARTS IDENTIFICATION FRAME ASSEMBLY WHEEL ASSEMBLY WHEELCHAIR USE
More informationTECHNICAL CHARACTERISTICS CT 014
Regulatory information CE Marking CE Index of classification I PHTALATES LATEX Manual pneumatic tourniquets are made up of : Manometer 0-600 mmhg with hand inflator Decontaminable arm cuff and lower limb
More informationAERONAUTICAL ENGINEERING MECHANICAL TASK
AERONAUTICAL ENGINEERING MECHANICAL TASK Sea King Main Wheel & Tail Rotor Blades Removal/Inspection/Installation Objective: To safely remove, inspect and install a Tail Rotor Blade Time allotted: 1 hour
More informationDelta Upland Owner s Manual
Delta Upland Owner s Manual June 2014 190-01630-00_0E Printed in Taiwan All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of
More informationGUIDELINE FOR LICENSED GROOMER OF ACHIEVEMENT (9901)
GUIDELINE FOR LICENSED GROOMER OF ACHIEVEMENT (9901) The following information is a guideline to help candidates understand the points the examiners will be observing in the practical test. Good planning
More information