Stainless One-touch Fittings Series KG os Guide Collet Chuck Suitable for use with nylon and urethane. Large retaining force. as large retaining force while holding force is increased by the collet. elease button (White) Light force for removal When the fitting is removed from the, the chuck and collet are released, thus preventing them from biting into the tube excessively. AT. Seal Can be used for a wide range of pressures from a low vacuum up to a pressure of 1 a The use of a special profile ensures sealing and reduces resistance when the tube is inserted. Body (White) O-ring Tube Stud Effective when piping in a confined space. The body and the ed portion can rotate. Stainless specifications applicable to corrosive environments Stainless steel 3 adopted for metal elements Suitable for use in CT production lines where contact with copper must be avoided, food processing machines where water or salt water splashes and clean room where discoloration of copper material and corrosion must be avoided. Tubing Tubing material Tubing O.D. Note 1) Soft nylon is not compatible with water. Specifications rincipal arts aterial FE, FA, Nylon, Soft nylon, (1) olyurethane ø, ø, ø, ø, ø, ø1 Fluid Air/Water (2) Operating pressure range (3) 0ka to 1a roof pressure 3a Ambient and fluid temperature 5 to 0 C (Water: 0 to 0 C) (No freezing) JIS B 0203 (Taper for piping) ounting section Thread JIS B 0205 (etric coarse ) Nut section JIS B 0205 (etric fine ) Seal on the s With sealant or none () Note 2) The surge pressure must be under the maximum operating pressure. Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Note ) Suffix S to the part number, if w/ seal is desired. Body Stud Chuck Guide Collet, elease button Seal, O-ring Gasket Stainless steel 3, BT Stainless steel 3 (Thread portion) Stainless steel Stainless steel, Stainless steel 3, BT O NB Stainless steel, NB 20 ade to Order (efer to page 251 for details.) Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Stainless One-touch Fittings Series KG ex. socket head male connector KGS. Universal male elbow KGV.2 Internal hex. allows connection by using an allen wrench for confined spaces. Universal male elbow allows connection by using a socket wrench for confined spaces. Bulkhead union KGE.250 Extended male elbow KGW.2 Bulkhead connector KGE.250 Use to connect tubes through a panel. Basically, it is used together with male elbow. Different point is that it is used for fittings to avoid from interfering with each other by making the piping two-level. Use to connect male thead and tube through a panel. K KK D S LQ ale connector KG. Use to pipe in the same direction from female. ost general style. ale elbow KGL.23 Use to pipe at right angles to female. ost general style. ale branch tee KGT.2 Use to branch line from female in both 90 directions. Q T Female connector KGF.23 Use to pipe from male such as pressure gauge. Union elbow KGL.25 Use to connect tubes at right angles. Union tee KGT.2 Use to connect tubes in both 90 directions. Straight union KG.23 Use to connect tubes in the same direction. lug-in elbow KGL.25 Use to change by 90 in a tube fetching direction from Onetouch fittings. Different diameter tee KGT.27 Use to connect tubes with size down in both 90 directions. Different diameter straight KG.23 Use to connect different sized tubes. ale delta union KGD.27 Use to branch line in 90 direction from female. ale run tee KGY.27 Use to branch line in the same direction from female and in 90 direction. ale branch connector Delta union Different dia. double union Y KGLU.2 Use to branch line KGD.2 Use to branch KGUD.29 at right angles to line in tripple 90 female. direction. Use to four-branch line in the same direction. Branch union elbow KGLU.25 Use to branch line at right angles. Delta branch KGUD.2 Use to four-branch line in the same direction from female. Union Y KGU.29 Use to branch line in the same direction. Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Series KG Different dia. union Y KGU.29 Use to connect tubes in the same direction, reducing the size of tubes. lug-in reducer KG.29 Use to change size of One-touch fittings. Tube cap KGC.250 Use to plug unused. Branch KGU.2 Use to branch line in the same direction from the female. ale Connector: KG <5> 1 5 x 0. 1 (1) L A *.9.7.1 1 1 1.5 (2) KG0-5 2. KG0-01 9 5. 1 KG0-02 1 5 x 0. KG0-5. 1.7.5 3. 1 KG0-01. 1.5 1 1 KG0-02 1.5.1. 1 3 KG0-03 20.9 15.5 27 1 KG0-01 27.1 2 1 1 KG0-02 2 20.5 1.5 2.1 1.0 3 KG0-03 20.9 15.5 2 1 KG-01 29.1 2 1 KG-02 33 27.5 1.5 29.5 3 KG-03 27.9.5 1 2 KG-0 2.1 53 1 KG-02 3 2.5 2 3 KG-03 2.9 23.5 5.3.1 3 1 2 KG-0 29.1 51 3 KG1-03 3. 32 1 (1) 1 2 1 2 2 KG1-0 3. 2.5 1 (9) 7 * eference dimensions after installation. Note 1) : ax. diameter Note 2) ( ): Values for soft nylon. exagon Socket ead ale Connector: KGS <5> 5 x 0. 1 5 x 0. 1 1 1 1 3 1 1 L A * 2.5 1.7 15..7.1 3..0 9.9.7.0.2 1.2 23.3 KGS0-5 2. KGS0-01 KGS0-5 3 2.5 9. 23.5 1. 1.5 3.2 KGS0-01. 20 9 2 KGS0-02. 1 15 KGS0-01 5 2 2 1 KGS0-02 25.5.5 1.5 KGS0-03 27.5.5 2 KGS-01 5 2.2.0 1 KGS-02.5 27.5 3 KGS-03 39.0 2. 1 2 KGS-0 2 20 1 KGS-02 33.5 27.5.0 23 3 KGS-03 29.5.5 1 1 0.0 2 KGS-0 2 20 * eference dimensions after installation. : ax. diameter Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Stainless One-touch Fittings Series KG Female Connector: KGF Straight Union: KG c 1 L1 L2 1 5. 15 23 15.1. 25 1.5 2.1 1.0 2 2 1.5 29.5 27 3 5.3.1 31 KGF0-01 1 27 1 KGF0-02 31 1 1 KGF0-01 1 27.5 1 KGF0-02 31 3 KGF0-03 33.5 15 1 KGF0-01 1 29 1 KGF0-02 1 32.5 3 KGF0-03 33.5 1 1 KGF-02 3.5 1 3 KGF-03 3.5 15 1 KGF-02 3 KGF-03 37 1 1 2 KGF-0 2 1 1 52 : ax. diameter L KG0-00. 32.5 1 5. 3 KG0-00. 3.5.1. KG0-00 15.2 3.5 1.5 2.1 1.0 KG-00 1.5 2.5 1.5 29.5 KG-00 20.9.5 5.3.1 1 : ax. diameter K KK D S LQ Q T Different Diameter Straight: KG a b L 1 2 a b KG0-0. 3.5 1 5. 5 KG0-0 15.2 3.5 1.5.1. KG0-1.5 2 1.5 2.1 1.0 KG- 20.9.5 1.5 29.5 1 : ax. diameter ale Elbow: KGL <5> 1 5 x 0. 1 1 5 x 0. 1 1 3 1 1 3 1 1 3 1 2 1 3 1 2 3 1 2 KGL0-5 KGL0-01 KGL0-02 KGL0-5 KGL0-01 KGL0-02 KGL0-03 KGL0-01 KGL0-02 KGL0-03 KGL-01 KGL-02 KGL-03 KGL-0 KGL-02 KGL-03 KGL-0 KGL1-03 KGL1-0 (1) 1 2 L1 L2 A * (2) mm 2 3.5 7 9.3 15..7 15.3.7 3.5 2.7.1 23. 1 1.2.2 1 25.5 25 7. 1.1 1.7..5 3.5 3.5 3.1.1 25.5 1. 20 2.5 27.5. 9.0 27.9 29 33 23. 2 1 15.2 23 2 1.5. 1.9 29. 31.5 2.1 32. 1.9 25 29.5 33 2 1.5 2.5.9 3.5.2 25.0 3.1 37 3.5.5 2 20.9 2.5 31.9 37 50.2 39.7 3 3.1 39.5 5 2.5 20.9 3 3.9.5 71 (71) 1 2 0.1 0 () 5 * eference dimensions after installation. Note 1) 1: ax. diameter Note 2) ( ): Values for soft nylon. Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com 23
Series KG ale Branch Connector: KGLU <5> Q2 L3 L2 ø A ø.2 Q1 Q2 ø ø.2 Q1 L1 2-applicable L1 5 x 0. 1 1 KGLU0-5 KGLU0-01 KGLU0-02 1 5 x 0. KGLU0-5 1 KGLU0-01 1 3 1 1 3 KGLU0-02 KGLU0-03 KGLU0-01 KGLU0-02 KGLU0-03 1 1 KGLU-02 3 KGLU-03 1 2 1 3 KGLU-0 KGLU-02 KGLU-03 1 2 KGLU-0. 1.5 L1 L2 L3 A * Q1 Q2 2 25. 29.5 31.1.5 25.5 27.5 1. 1.5 2.5 33 29.5. 2..1 32 32.5 39 33.5. 20.5 33.9 0. 33.1 0. 3 15.2 2 3.5 3.5 1.5 15.2 2.5 1 3.9. 39 39.5 9 3.5 1.5 27 39.9 9. 1.5 2 1 3. 53.1 5.5 2 52.5 7 20.9 29 2. 52.9 7.5 20.9 1 5. 5.1 9.3.1.0.1.3.3.9.0 2.3 57.2 1.2 0. 29.0 5.2 15 27 1 2 57 5 5 * eference dimensions after installation. : ax. diameter L3 L2 A Universal ale Elbow: KGV <5> 5 x 0. 1 5 x 0. 1 1 1 1 3 1 3 3 1 2 KGV0-5 KGV0-01 KGV0-5 KGV0-01 KGV0-02 KGV0-01 KGV0-02 KGV0-03 KGV-02 KGV-03 KGV-03 KGV-0 1 1 1 2 L1 L2 L3 A *. 9. 20.5 1.5 15.. 25..5 1 9. 23.5 1.5 15.. 2. 25..5 15.3 23.5 1.5 25 15.2. 1. 27. 2.5 2.5 1 31 25.5 1.5 20. 27.5.. 1.5 20. 31 29.5.. 20.9 25.2 3 20.9 37. 32 2.1 0. 33.5 2.9 2.9 1 3. 3. 7 7.5 5.9 15 2 1.2 2 20.5 1.3 7 27 20.3 0 9 39. 3 0 * eference dimensions after installation. 1: ax. diameter 2 Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Stainless One-touch Fittings Series KG Union Elbow: KGL Branch Union Elbow: KGLU Q2 ø ø.2 Q1 L1 (1) L Q (2) KGL0-00. 1.5 1.2.2 KGL0-00. 20 5.3. 9.0 KGL0-00 15.2 23 1.5. 1.9 KGL-00 1.2 2.5..2 25.0 KGL-00 20.9 2.5 7.5 50.2 39.7 1 KGL1-00 2.5 3 25 0 () 29 Note 1) : ax. diameter Note 2) ( ): Values for soft nylon. L1 L2 Q1 2 KGLU0-00. 1.5 2 1.5 1..0.1 KGLU0-00. 27.5 20.5..9.0 KGLU0-00 15.2 2 32 2.5 1 1.5 15.2 2.3 1.2 15 KGLU-00 1.5 27 3.5 2 1 1.5 0. 29.0 25 KGLU-00 20.9 29 0 1 20.9 57.2 5.2 32 : ax. diameter Q2 K KK D S LQ Q T L2 L1 3 x applicable lug-in Elbow: KGL fitting size ød tube O.D. mm fitting size ød 1 2 L1 L2 A KGL0-99. 1 25 1.5 1.2.2 KGL0-99. 20 27.5. 9.0 KGL0-99 15.2.5 31.5 1.5. 1.9 1 KGL-99 1.5 1 25.5.5 23.5.2 25.0 25 KGL-99 20.9 1 27 37.5 2 50.2 39.7 2 1: ax. diameter Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com 25
Series KG Extended ale Elbow: KGW <5> O.D. 1 2 L1 L2 A (mm) 5x0. KGW0-5 32 3.0 3.0 1 KGW0-01. 1 3. 3.5 1 23.0.0 1 KGW0-02 1 3 2.5 3 5x0. KGW0-5.5 33.5 3.0 3.0 1 KGW0-01 39.1 2.5 2. 20 1 KGW0-02 1 5.5.5.9. 1 3 KGW0-03.9 7 1 1 KGW0-01 KGW0-02 1 15.2 23 2. 9 7 51 1.5 20.5 1.2 7 3 KGW0-03 50. 52.5 7 1 KGW-02 5 59.5 3 KGW-03 1.5 2.5 57. 1 33.5 23. 7 1 2 KGW-0.1 15 1 KGW-02 57 2 3 KGW-03 20.9 2.5 5. 3.5 7.7 37.7 7 1 2 KGW-0 5.1.5 eference dimensions after installation. 1: ax. diameter ale Branch Tee: KGT <5> (1) O.D. 1 2 L1 L2 A (2) (mm) 5x0. KGT0-5 7 9.3 15..7 15.3.7.3.3 3.5 1 KGT0-01.1 23. 1 1.0.1 1 KGT0-02 1 25.5 25 5x0. KGT0-5 7. 1.1 1.7..5.3.3.2 1 KGT0-01.1 25.5 1 KGT0-02 1. 20 2.5 27.5.9.0 20 3 KGT0-03 27.9 29 3 1 1 KGT0-01 KGT0-02 1 15.2 23 23. 2 2 1.5 2.3 1.2 1 3 KGT0-03 29. 31.5 3 1 KGT-01 2.1 32 31 1 KGT-02 29.5 33 29 3 1.5 2.5 0. 29.0 KGT-03.9 3.5 39 1 2 KGT-0.1 37 1 KGT-02.5.5 31 3 KGT-03 20.9 2.5 31.9 37 57.2 5.2 1 1 2 KGT-0 3.1 39.5 3 1 KGT1-03 3.9.5 71 (71) 1 2.5 20.9 3 25 1 2 KGT1-0 39. 0 (0) eference dimensions after installation. Note 1) 1: ax. diameter Note 2) ( ): Values for soft nylon Union Tee: KGT 3 x applicable O.D. (mm) 1 (1) (2) L Q KGT0-00. 1.5 1.. 7 KGT0-00. 20 5.3.. KGT0-00 15.2 23 1.5 25..7 15 KGT-00 1.5 2.5. 0 2. 25 KGT-00 20.9 2.5 7.5 57. 5. 29 KGT1-00 2.5 3 25 0 () 0 Note 1) : ax. diameter Note 2) ( ): Values for soft nylon. 2 Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Stainless One-touch Fittings Series KG Different Diameter Tee: KGT 1 2 L1 L2 Q 1 2 KGT0-0...5 1.5 1 7.1.5 5 KGT0-0 15.2..5 20 5.3 1.5 1. 1. KGT0-1.5 15.2 2.5 23 1.5 3 27.2 1 KGT- 20.9 1.5 2.5 2.5. 5.5 1: ax. diameter ale un Tee: KGY <5> O.D. (mm) 1 (2) (1) 1 2 L1 L2 A L3 5 x 0. KGY0-5 7 9.3 15..7.7 25..7.. 3.5 1 KGY0-01.1 3. 1 1.. 1 KGY0-02 1 25.5 3 5 x 0. KGY0-5 7..1 1.7.1 2.7.5...3 1 KGY0-01.1 39 1 KGY0-02 1. 20 2.5 1.. 20 3 KGY0-03 27.9 2.5 3 1 KGY0-01 23. 3.5.. 1 1 KGY0-02 1 15.2 23 2 5.5 1.5 25..7 3 KGY0-03 29. 7 3 1 KGY-01 2.1 9.5 31 1 KGY-02 29.5 50.5 29 3 1.5 2.5 0.0 2. KGY-03.9 52 39 1 2 KGY-0.1 5.5 1 KGY-02.5 53.5 31 3 KGY-03 20.9 2.5 31.9 55 57. 5. 1 1 2 KGY-0 3.1 57.5 3 KGY1-03 3.9 5.5 1 (1) 1 2.5 20.9 3 25 1 2 KGY1-0 0.1 7 1 (1) eference dimensions after installation. Note 1) 1: ax. diameter Note 2) ( ): Values for soft nylon. ale Delta Union: KGD <5> O.D. L1 L2 A Q (mm) 5 x 0. KGD0-5 2 25.5.3.3 1 KGD0-01. 1.5 25. 27.5 1.7.0.0 1 KGD0-02 1 5 x 0. KGD0-5 2 2.5.3.3 1 KGD0-01 2.1 31.5 1. 20.5 9.9 1 KGD0-02 1 32 33.9.0 3 KGD0-03 33. 3.5 3 1 KGD0-01 32. 37 1 KGD0-02 15.2 23.5 3 3 1.5.1 2.3 1.2 2 3 KGD0-03 3. 3.5 1 KGD-02 39 3 39 3 KGD-03 1.5 2.5 39. 3.5. 0. 29.0 0 1 2 KGD-0 3.1 5 2 1 KGD-02 1.5.5 55 3 KGD-03 20.9 2.5 1.9 7.9 57.2 5.2 5 1 2 KGD-0 5.1.5 3 eference dimensions after installation. : ax. diameter Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com 27
Series KG Delta Union: KGD 3 x applicable L KGD0-00. 1.5.7 1.0.1 5 KGD0-00. 20.5 9.9.9.0 7 KGD0-00 15.2 23.5.1 1.5 2.3 1.2 KGD-00 1.5 2.5. 0. 29.0 KGD-00 20.9 2.5.9 57.2 5.2 2 : ax. diameter Q Branch Y : KGU <5> 5 x 0. 1 KGU0-5 KGU0-01 1 KGU0-02 1 5 x 0. KGU0-5 1 KGU0-01 1 3 1 KGU0-02 KGU0-03 KGU0-01 1 1 KGU0-02 3 KGU0-03 1 KGU-02 3 KGU-03 1 2 KGU-0 1 KGU-02 3 KGU-03 1 2 KGU-0.. 15.2 1.5 20.9 L 39.5 1.1 5.5 2.5..5 9.9 51. 55 55. 0.5 0.9.1. 7... 15.2 1.5 20.9 A 3 3 0 39 1.5 3.5.5 9.5 50 55 55.5 57 5.5 59 0.5 1 1.5 2.2 2.2.2.2 2.2. 2.2. 25..7 0 2. 57. 5. 20 3 15 23 0 5 32 0 5 eference dimensions after installation. : ax. diameter Delta Branch: KGUD x applicable threed 1 KGUD0-01 1 KGUD0-02 1 1 KGUD0-01 1 KGUD0-02 1.. 2. 15.2 L 2..5 9. 53 I A 39.5 1 2.5 7.5 Q 9.7.7 1..2.2 25... 29 eference dimensions after installation. 1: ax. diameter 2 Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Stainless One-touch Fittings Series KG Union Y : KGU 3 x applicable Different Diameter Union Y : KGU L1 L2 KGU0-00. 3 1. 9.7 1 KGU0-00. 37 20..7 KGU0-00 15.2 2.5 2.5 15.2.7 1.5 KGU-00 1.5 27.5 1.5 1.1 KGU-00 51 20.9 1.1.2.2.. 25..7 0 2. 7 9 1 20.9 57. 5. 23 : ax. diameter 1 2 L1 Q 1 KGU0-0.. 1. 9.7 1 KGU0-0. 15.2 39.5 20..7 KGU0-15.2 1.5 5 2.5 15.2.7 1.5 KGU- 1.5 20.9 9 27.5 1.5 1.1 L2 Q 2.2.2 1.5.. 25..7 0 2. 1 27 1, 2: ax. diameter K KK D S LQ Q T Different Diameter Double Union Y : KGUD 12 L1 L2 I Q 1 2 KGUD0-0...5 1.2. 9.7 1.2.2 KGUD0-0. 15.2 0.5 20.3. 2.7 1.5.. 1, 2: ax. diameter x applicable lug-in educer: KG fitting size ød fitting size ød 1 1 L A KG0-0 KG0-0 KG0- KG0-0 KG0-0 KG0- KG0- KG0- KG0- KG- KG-1 KG-1 (1)... 15.2 15.2 1.5 20.9 20.9 3.5 3.5 39.5 37 37 39.5 2 1 2.5 50.5 50.5.5 1 1.5 1.5 20 20 23 25.5 25.5 1 (2) 5..1. 1. 2.0 3.3 3 2.5 3.7.0. 33 2 37 1.5 2.1 1.5 1.0 32. (29.5) 5.3 (.1) Note 1) : ax. diameter Note 2) ( ): Values for soft nylon. Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com 29
Series KG Bulkhead Union: KGE ounting plate thickness mm or less ounting T() L hole KGE0-00 x 1 1 32.5 1 5. 2 KGE0-00 1 x 1 3.5 15.1. 33 KGE0-00 1 x 1 3 1.5 2.1 1.0 52 KGE-00 20 x 1 2 2.5 1.5 29.5 70 KGE-00 x 1 27 23 5.3.1 90 1 KGE1-00 2 x 1.5 32 51 29 25 1 (9) 5 ( ): Values for soft nylon. Bulkhead Connector: KGE ounting plate thickness 7 mm or less 1 1 2 T() ounting L1 L2 c hole 1 KGE0-01 1 27.5 1 x 1 1 1 5. 1 KGE0-02 31 15 1 KGE0-01 2 1 KGE0-02 1 x 1 31.5 15 15.1. 3 KGE0-03 33.5 29 1 KGE0-01 27.5 7.5 2 1 KGE0-02 1 x 1 33 1.5 2.1 1.0 27 3 KGE0-03 15 1 KGE-02 3.5.5 53 20 x 1 2 1.5 29.5 3 KGE-03 3.5 1 7 3 KGE-03 37 1 92 x 1 1 2 27 23 5.3.1 2 KGE-0 1 1 59 3 KGE1-03 0 1 9 7 1 2 x 1.5 32 29 25 (9) 2 KGE1-0 1 1 2 ( ): Values for soft nylon. Tube Cap: KGC L KGC0-00. 1 3 KGC0-00. 1.5 3 KGC0-00 15.2 20.5 1.5 KGC-00 1.5 23 KGC-00 20.9 2 1 KGC1-00 2.5 2 25 : ax. diameter 250 Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com
Series KG ade to Order Specifications lease contact SC for detailed dimensions, specifications, and delivery. 1 Grease-free Specifications Symbol X Specifications Grease-free ubber material: NB (With fluorine coating) elease button color: Light blue Grease-free ubber material: NB (With fluorine coating) X39 elease button color: Light blue Clean (Copper-free, air blow, double package) Grease-free X9 ubber material: FK (With fluorine coating) elease button color: Light blue Suffix -X to the end of part number. Example) KG0-01-X 2 Other Specifications K KK D S LQ Q Symbol Specifications T X X3 Lubricant: White Vaseline elease button color: White ubber material: FK Spare arts Description Gasket art no. -5G2 KG0-01 5 model KGE0-00, KGE0-01, KGE0-02 KG0-01 KGE0-00, KGE0-01 KGE0-02, KGE0-03 ipe nut KG0-01 KGE0-00, KGE0-01 KGE0-02, KGE0-03 KG-01 KG-01 KG1-01 KGE-00, KGE-02, KGE-03 KGE-00, KGE-03, KGE-0 KGE1-00, KGE1-03, KGE1-0 Courtesy of Steven Engineering, Inc.-2 yan Way, South San Francisco, CA 900-370-ain Office: (50) 5-9200-Outside Local Area: (00) 25-9200-www.stevenengineering.com 251