SUTURE MATERIALS. For quality & safety.

SUTURE MATERIALS For quality & safety SMI AG Steinerberg 8 4780 - St. Vith / BELGIUM Tel.: +32 80/227 292 Fax: +32 80/226 918 info@sutures.be

SMI AG SMI: Surgical sutures of the highest quality SMI AG was established in 1987 - the first Belgian company manufacturing surgical sutures - since then it has grown continuously. Today SMI is recognised as a world-wide supplier of quality surgical sutures and medical devices. The company is situated in St. Vith in the East of Belgium, near the point where the borders of Belgium, Germany and Luxembourg meet. HIGHEST QUALITY AND SAFETY SMI complies always with international quality standards such as EN ISO 9001 and EN ISO 13485 as well as Good Manufacturing Practices (GMP). All raw materials and finished products are submitted to stringent quality control by a highly qualified team. SMI is dedicated to customer satisfaction by ensuring high quality products and an excellent service based on customer focus, reliability and delivery performance. WORLD-WIDE RECOGNITION SMI exports to around 80 different countries all over the world. For this performance SMI received the Royal Export Award 2000 from the Belgian Foreign Trade Board. THE CATALOGUE - EDITION 2015 This catalogue contains information about the full range of SMI suture materials with details of all standard presentations held in stock. Special sizes of sutures can be supplied following customer s requests. We are constantly striving to increase our product range based on market developments and customer needs. SMI offers all sizes from USP 12/0 to USP 6 which enables surgeons to operate in all surgical specializations including Cardiology, Microsurgery and Ophthalmology. Since many years SMI products are recognized by top surgeons around the world.

CERTIFICATES

ORDER NUMBER SPECIFICATION 1 20 01 15 2 P suture material 1 CATGUT Plain 2 CATGUT Chrom 4 SUPRAMID 5 POLYPROPYLENE 7 POLYESTER 8 SILK 9 DACLON Nylon 10 STEEL Monofilament 11 SURGICRYL PGA Polyglycolic acid 13 SURGICRYL Monofilament Polydioxanone 14 SURGICRYL Rapid Polyglycolic acid 15 SURGICRYL 910 Polyglactine 16 SURGICRYL Monofast Polyglecaprone thread size metric EP needle type 03 5/8 circle round bodied taper point FR 01 1/2 circle round bodied taper point HR 09 1/2 circle round bodied taper point loop HR 02 3/8 circle round bodied taper point DR 35 3/8 circle round bodied micro needle taper point MDR 07 1/4 circle round bodied taper point VR 20 straight round bodied taper point GR 30 J-needle round bodied taper point JR 05 1/2 circle round bodied tapercut point HRT 04 3/8 circle round bodied tapercut point DRT 31 J-needle round bodied tapercut point JRT 26 3/8 circle soft cutting point coronary CC 14 1/2 circle reverse cutting HS 15 3/8 circle reverse cutting DS 21 straight reverse cutting GS 16 1/2 circle cutting NHS 17 3/8 circle cutting NDS 22 1/2 circle side cutting spatula HSP 23 3/8 circle side cutting spatula DSP 24 1/4 circle side cutting spatula VSP 25 straight side cutting spatula GSP 18 1/2 circle round bodied blunt needle HRB 19 3/8 circle round bodied blunt needle DRB 00 without needle needle length mm double armed U P VB undyed suture material Easy Pass needle black needle

NEEDLE TYPES SMI surgical needles are manufactured from highest quality stainless steel grades for outstanding performance, combining high ductility and strong bending moment. Advanced silicon coating ensures smooth penetration and reduced tissue trauma. The shape of the needle body is designed in order to allow maximum stability in the needle holder. 5/8 CIRCLE 1/2 CIRCLE 3/8 CIRCLE 1/4 CIRCLE J-NEEDLE STRAIGHT TAPER POINT A gradual taper to a round bodied needle. SIDE CUTTING SPATULA NEEDLES Needle with cutting edges on the two sides. TAPERCUT POINT Balanced, cutting point-tapering into a round bodied needle. SOFT CUTTING POINT - CORONARY A minute point followed by a round body and a rectangular main body for better penetration in cardiovascular surgery. REVERSE CUTTING A triangular body offers a third cutting edge on the outer convex curvature. CONVENTIONAL CUTTING A triangular body offers a third cutting edge on the inside concave curvature. EASY PASS NEEDLE Precision point with extra sharpening. BLUNT NEEDLE Cylindrical bodied needle with a rounded point. For soft tissue such as in liver and kidneys. Reduced risk of needle stick injuries.

EASY PASS NEEDLE Sharp and strong Easy passing Every pass feels like the first one The Easy Pass needle combines 3 advanced technologies to a prime precision needle: Advanced needle coating technology Precision point with extra sharpening A new generation of maraging stainless steel CHARACTERISTICS Precision point with extra sharpening A new generation of maraging stainless steel Advanced needle coating technology Silicone coating covers entire surgical needle BENEFITS Excellent penetration to reduce patient trauma and to maintain intimal integrity Optimal and predicable penetration Long-lasting sharpness over a multiplicity of passes Significantly sharper pass after pass Best bending and break resistance Optimal combination of strength and ductility Extremely smooth surface Better penetration, control and needle passage Maintains needle sharpness from start to finish over multiple passes INDICATIONS Cosmetic and plastic surgery Penetration performance improved by 40%- 50%compared to standard cutting needles. 1st penetration 10th penetration Easy Pass needle Standard cutting needle Easy Pass needle Standard cutting needle Penetration force Penetration force

SUTURE MATERIALS NON-ABSORBABLE SUTURES ABSORBABLE SUTURES

SMI PRODUCTS absorbable Sutures in foil packs SURGICRYL 910 Polyglactine SURGICRYL PGA Polyglycolic acid SURGICRYL Rapid Polyglycolic acid SURGICRYL Monofast Polyglecaprone SURGICRYL Monofilament Polydioxanone CATGUT Plain CATGUT Chrom Loss of tensile strength over time: non-absorbable POLYPROPYLENE DACLON Nylon SUPRAMID Polyamide SILK Braided POLYESTER STEEL Monofilament absorbable Microsurgery SURGICRYL 910 Polyglactine non-absorbable DACLON Nylon POLYPROPYLENE absorbable Ophthalmic surgery SURGICRYL PGA Polyglycolic acid SURGICRYL 910 Polyglactine non-absorbable SILK Virgin SILK Braided DACLON Nylon POLYESTER POLYPROPYLENE Speciality products Skin stapler & remover Polypropylene mesh Skin marker Bone wax SMI Spon - absorbable haemostatic gelatin sponge Surgical blades & scalpel handles Pilomat - tablet crusher and splitter Cervix set Surgical suture rack Surgical needles absorbable Sutures in cassette packs SURGICRYL PGA Polyglycolic acid SURGICRYL PGA Plus Polyglycolic acid SURGICRYL Monofilament Polydioxanone SURGICRYL Monofast Polyglecaprone CATGUT Plain CATGUT Chrom non-absorbable SILK Braided black SUPRAMID Polyamide white SUPRAMID Polyamide black LINAFIL Natural VITAFIL Polyester white DERMAFIL Polyester green DACLON Nylon STEEL Monofilament For more accurate technical information please refer to the package insert. See the complete product list on.

Type Braided and coated multifilament Composition Polyglactine 910, a copolymer made of 90% glycolide and 10%L-lactide Coating Colour Tissue reaction Absorption Presentation Poly-glycolide-co-L-lactide and calcium stearate (<1%) Violet Minimal The hydrolytic action by which the material is broken down results in total absorption between 56 and 70 days. Between 40% and 50% of tensile strength remain after 21 days. Box with 12 sutures For quality & safety Surgicryl 910 Revision 4

CHARACTERISTICS High tensile strength Synthetic Breaks down by hydrolysis Braided structure Coated multifilament Hermetically sealed packing BENEFITS Excellent tissue support Minimal tissue reaction Predictable absorption rate Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues with minimal sawing, tissue drag and trauma Good knot tie down / adjustability Reduced capillary action Guaranteed seal and product sterility INDICATIONS General soft tissue closing and/or ligation CONTRAINDICATIONS Cardiovascular surgery Neurosurgery especially in General surgery Skin closure Gastrointestinal surgery Plastic surgery Ophthalmic surgery Gynaecology Being absorbable not to use when an extended wound support is required. Caution in patients with delayed wound healing (e.g. compromised immune system). Obstetrics Orthopaedics Urology 100% 90% TENSILE STRENGTH ABSORPTION 0% 100% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 7 14 21 28 35 42 49 56 63 70 77 84 91 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 1.5 4/0 150 cm violet 1515 0015 2 3/0 150 cm violet 1520 0015 3 2/0 150 cm violet 1530 0015 3.5 0 150 cm violet 1535 0015 4 1 150 cm violet 1540 0015 5 2 150 cm violet 1550 0015 3 2/0 3 x 45 cm violet 1530 0045-3 3.5 0 3 x 45 cm violet 1535 0045-3 2 3/0 6 x 45 cm violet 1520 0045-6 3 2/0 6 x 45 cm violet 1530 0045-6 3.5 0 6 x 45 cm violet 1535 0045-6 2 3/0 12 x 45 cm violet 1520 0045 3 2/0 12 x 45 cm violet 1530 0045 4 1 12 x 45 cm violet 1540 0045 2 3/0 2 x 70 cm violet 1520 0070-2 3 2/0 2 x 70 cm violet 1530 0070-2 3.5 0 2 x 70 cm violet 1535 0070-2 4 1 2 x 70 cm violet 1540 0070-2 5 2 2 x 70 cm violet 1550 0070-2 4 1 7 x 75 cm violet 1540 0075 Without needle Metric USP Length Order number Ligapack 2 3/0 250 cm violet 1520 0025 3 2/0 250 cm violet 1530 0025 3.5 0 250 cm violet 1535 0025 4 1 250 cm violet 1540 0025 5 2 250 cm violet 1550 0025 Surgicryl 910 Revision 4 Page 1

Round bodied taper point Metric USP Length Order number HR 13 mm HR 17 mm HR 22 mm HR 26 mm HR 30 mm HR 36 mm HR 40 mm 0.7 6/0 75 cm violet 1507 0113 1 5/0 75 cm violet 1510 0113 1 5/0 75 cm violet 1510 0117 1.5 4/0 75 cm violet 1515 0117 2 3/0 75 cm violet 1520 0117 3 2/0 75 cm violet 1530 0117 1.5 4/0 75 cm violet 1515 0122 2 3/0 75 cm violet 1520 0122 3 2/0 75 cm violet 1530 0122 4 1 75 cm violet 1540 0122 1.5 4/0 75 cm violet 1515 0126 2 3/0 75 cm violet 1520 0126 3 2/0 75 cm violet 1530 0126 3.5 0 75 cm violet 1535 0126 4 1 75 cm violet 1540 0126 5 2 75 cm violet 1550 0126 2 3/0 75 cm violet 1520 0130 3 2/0 75 cm violet 1530 0130 3.5 0 75 cm violet 1535 0130 4 1 75 cm violet 1540 0130 5 2 90 cm violet 1550 0130 2 3/0 75 cm violet 1520 0136 3 2/0 75 cm violet 1530 0136 3.5 0 90 cm violet 1535 0136 4 1 90 cm violet 1540 0136 5 2 90 cm violet 1550 0136 3 2/0 75 cm violet 1530 0140 3.5 0 90 cm violet 1535 0140 4 1 75 cm violet 1540 0140-75 4 1 90 cm violet 1540 0140 5 2 75 cm violet 1550 0140-75 5 2 90 cm violet 1550 0140 HR 45 mm 5 2 90 cm violet 1550 0145 Surgicryl 910 Revision 4 Page 2

Round bodied taper point Metric USP Length Order number 3 2/0 90 cm violet 1530 0148 HR 48 mm 3.5 0 90 cm violet 1535 0148 4 1 90 cm violet 1540 0148 5 2 90 cm violet 1550 0148 HR 60 mm 3.5 0 75 cm violet 1535 0160 HR 65 mm 3 2/0 90 cm violet 1530 0165 3.5 0 90 cm violet 1535 0165 Round bodied taper point double armed Metric USP Length Order number 2 x HR 26 mm 2 3/0 75 cm violet 1520 0126-2 Round bodied taper point heavy needle Metric USP Length Order number HR 36 mm 4 1 90 cm violet 1540 0136-H Round bodied taper point Metric USP Length Order number 5/8 Circle FR 27 mm 2 3/0 75 cm violet 1520 0327 3 2/0 75 cm violet 1530 0327 Surgicryl 910 Revision 4 Page 3

Round bodied taper point Metric USP Length Order number DR 17 mm 1.5 4/0 45 cm violet 1515 0217 3/8 Circle DR 22 mm 1.5 4/0 75 cm violet 1515 0222 2 3/0 75 cm violet 1520 0222 DR 30 mm 4 1 75 cm violet 1540 0230 Reverse cutting Metric USP Length Order number HS 12 mm 0.7 6/0 45 cm violet 1507 1412 HS 17 mm 1 5/0 75 cm violet 1510 1417 1.5 4/0 75 cm violet 1515 1417 HS 22 mm 2 3/0 75 cm violet 1520 1422 HS 23 mm 5 2 90 cm violet 1550 1423 HS 26 mm HS 36 mm HS 40 mm HS 45 mm HS 48 mm 2 3/0 75 cm violet 1520 1426 3 2/0 75 cm violet 1530 1426 3.5 0 75 cm violet 1535 1426 4 1 75 cm violet 1540 1426 3 2/0 75 cm violet 1530 1436 3.5 0 90 cm violet 1535 1436 4 1 90 cm violet 1540 1436 5 2 90 cm violet 1550 1436 2 3/0 90 cm violet 1520 1440 3 2/0 90 cm violet 1530 1440 3.5 0 90 cm violet 1535 1440 4 1 90 cm violet 1540 1440 5 2 90 cm violet 1550 1440 4 1 90 cm violet 1540 1445 5 2 90 cm violet 1550 1445 3.5 0 90 cm violet 1535 1448 4 1 90 cm violet 1540 1448 5 2 90 cm violet 1550 1448 Surgicryl 910 Revision 4 Page 4

Reverse cutting Metric USP Length Order number HS 60 mm 3.5 0 90 cm violet 1535 1460 Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 16 mm DS 16 mm Easy Pass DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 24 mm Easy Pass DS 26 mm DS 26 mm Easy Pass DS 30 mm 0.7 6/0 45 cm violet 1507 1512 1 5/0 45 cm violet 1510 1512 1.5 4/0 45 cm violet 1515 1512 1 5/0 75 cm violet 1510 1516 1 5/0 75 cm undyed 1510 1516U 1.5 4/0 75 cm violet 1515 1516 2 3/0 50 cm undyed 1520 1516UP 1 5/0 75 cm violet 1510 1519 1.5 4/0 75 cm violet 1515 1519 2 3/0 75 cm violet 1520 1519 1.5 4/0 50 cm undyed 1515 1519UP 2 3/0 50 cm undyed 1520 1519UP 1.5 4/0 75 cm violet 1515 1524 2 3/0 75 cm violet 1520 1524 3 2/0 75 cm violet 1530 1524 3.5 0 75 cm violet 1535 1524 2 3/0 50 cm undyed 1520 1524UP 1.5 4/0 75 cm violet 1515 1526 2 3/0 75 cm violet 1520 1526 3 2/0 75 cm violet 1530 1526 3 2/0 90 cm violet 1530 1526-90 2 3/0 50 cm undyed 1520 1526UP 2 3/0 75 cm violet 1520 1530 3 2/0 75 cm violet 1530 1530 3.5 0 75 cm violet 1535 1530 Surgicryl 910 Revision 4 Page 5

Reverse cutting Metric USP Length Order number 3/8 Circle DS 30 mm Easy Pass DS 36 mm DS 40 mm 3 2/0 75 cm undyed 1530 1530UP-75 3 2/0 75 cm violet 1530 1536 3.5 0 75 cm violet 1535 1536 4 1 75 cm violet 1540 1536 3.5 0 75 cm violet 1535 1540 4 1 75 cm violet 1540 1540 Round bodied tapercut point Metric USP Length Order number HRT 13 mm 1.5 4/0 75 cm violet 1515 0513 HRT 26 mm HRT 30 mm HRT 36 mm HRT 40 mm 1.5 4/0 75 cm violet 1515 0526 2 3/0 75 cm violet 1520 0526 3 2/0 75 cm violet 1530 0526 3 2/0 75 cm violet 1530 0530 3.5 0 75 cm violet 1535 0530 4 1 75 cm violet 1540 0530 3 2/0 90 cm violet 1530 0536 3.5 0 90 cm violet 1535 0536 4 1 90 cm violet 1540 0536 3.5 0 90 cm violet 1535 0540 4 1 90 cm violet 1540 0540 5 2 90 cm violet 1550 0540 Round bodied tapercut point Metric USP Length Order number 3/8 Circle DRT 13 mm HRT 30 mm 1 5/0 75 cm violet 1510 0530-0413 Surgicryl 910 Revision 4 Page 6

Cutting Metric USP Length Order number Straight GS 60 mm 2 3/0 75 cm violet 1520 2160 3 2/0 75 cm violet 1530 2160 Blunt Metric USP Length Order number 3/8 Circle DRB 40 mm DRB 63 mm 3 2/0 90 cm violet 1530 1940 3.5 0 90 cm violet 1535 1940 4 1 90 cm violet 1540 1940 5 2 90 cm violet 1550 1940 4 1 100 cm violet 1540 1963 DRB 85 mm 5 2 75 cm violet 1550 1985 Surgicryl 910 Revision 4 Page 7

Type Composition Braided and coated multifilament Polyglycolic acid Coating Polycaprolactone and calcium stearate (1%) Colour Tissue reaction Absorption Presentation Violet / Beige - undyed Minimal The hydrolytic action by which the material is broken down results in total absorption in approximately 60 to 90 days. Approximately 50% of tensile strength remain after 21 days. Box with 12 sutures For quality & safety Surgicryl PGA Revision 4

CHARACTERISTICS High tensile strength Synthetic Breaks down by hydrolysis Braided structure Coated multifilament Hermetically sealed packing BENEFITS Excellent tissue support Minimal tissue reaction Predictable absorption rate Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues with minimal sawing, tissue drag and trauma Good knot tie down / adjustability Reduced capillary action Guaranteed seal and product sterility INDICATIONS General soft tissue closing and/or ligation CONTRAINDICATIONS Cardiovascular surgery Neurosurgery especially in General surgery Skin closure Gastrointestinal surgery Gynaecology Obstetrics Plastic surgery Being absorbable not to use when an extended wound support is required. Caution in patients with delayed wound healing (e.g. compromised immune system). Urology Ophthalmic surgery Orthopaedics 100% 90% TENSILE STRENGTH ABSORPTION 0% 100% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 7 14 21 28 35 42 49 56 63 70 77 84 91 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 2 3/0 150 cm violet 1120 0015 3 2/0 150 cm violet 1130 0015 3.5 0 150 cm violet 1135 0015 4 1 150 cm violet 1140 0015 5 2 150 cm violet 1150 0015 6 3&4 150 cm violet 1160 0015 7 5 150 cm violet 1170 0015 8 6 150 cm violet 1180 0015 1.5 4/0 3 x 50 cm violet 1115 0050 2 3/0 3 x 50 cm violet 1120 0050 3 2/0 3 x 50 cm violet 1130 0050 3.5 0 3 x 50 cm violet 1135 0050 4 1 3 x 50 cm violet 1140 0050 5 2 3 x 50 cm violet 1150 0050 2 3/0 12 x 45 cm violet 1120 0045 3 2/0 12 x 45 cm violet 1130 0045 3.5 0 12 x 45 cm violet 1135 0045 4 1 12 x 45 cm violet 1140 0045 5 2 12 x 45 cm violet 1150 0045 1.5 4/0 6 x 45 cm violet 1115 0045-6 2 3/0 6 x 45 cm violet 1120 0045-6 3 2/0 6 x 45 cm violet 1130 0045-6 3.5 0 6 x 45 cm violet 1135 0045-6 4 1 6 x 45 cm violet 1140 0045-6 5 2 6 x 45 cm violet 1150 0045-6 2 3/0 10 x 60 cm violet 1120 0060 3 2/0 10 x 60 cm violet 1130 0060 3.5 0 10 x 60 cm violet 1135 0060 4 1 10 x 60 cm violet 1140 0060 5 2 10 x 60 cm violet 1150 0060 2 3/0 5 x 70 cm violet 1120 0070 3 2/0 5 x 70 cm violet 1130 0070 3.5 0 5 x 70 cm violet 1135 0070 4 1 5 x 70 cm violet 1140 0070 5 2 5 x 70 cm violet 1150 0070 Surgicryl PGA Revision 4 Page 1

Without needle Metric USP Length Order number Ligapack 1.5 4/0 250 cm violet 1115 0025 2 3/0 250 cm violet 1120 0025 3 2/0 250 cm violet 1130 0025 3.5 0 250 cm violet 1135 0025 4 1 250 cm violet 1140 0025 5 2 250 cm violet 1150 0025 6 3&4 250 cm violet 1160 0025 Round bodied taper point Metric USP Length Order number HR 13 mm HR 17 mm HR 22 mm HR 26 mm HR 30 mm HR 36 mm 0.7 6/0 75 cm violet 1107 0113 1 5/0 75 cm violet 1110 0113 1.5 4/0 75 cm violet 1115 0113 0.7 6/0 75 cm violet 1107 0117 1 5/0 75 cm violet 1110 0117 1.5 4/0 75 cm violet 1115 0117 2 3/0 75 cm violet 1120 0117 3 2/0 75 cm violet 1130 0117 1.5 4/0 75 cm violet 1115 0122 2 3/0 75 cm violet 1120 0122 3 2/0 75 cm violet 1130 0122 1.5 4/0 75 cm violet 1115 0126 2 3/0 75 cm violet 1120 0126 3 2/0 75 cm violet 1130 0126 3 2/0 75 cm undyed 1130 0126U 3.5 0 75 cm violet 1135 0126 4 1 75 cm violet 1140 0126 2 3/0 75 cm violet 1120 0130 3 2/0 75 cm violet 1130 0130 3.5 0 75 cm violet 1135 0130 4 1 75 cm violet 1140 0130 2 3/0 75 cm violet 1120 0136 3 2/0 75 cm violet 1130 0136 3.5 0 90 cm violet 1135 0136 4 1 90 cm violet 1140 0136 Surgicryl PGA Revision 4 Page 2

Round bodied taper point Metric USP Length Order number HR 40 mm HR 48 mm 3 2/0 75 cm violet 1130 0140 3.5 0 90 cm violet 1135 0140 4 1 90 cm violet 1140 0140 4 1 75 cm violet 1140 0140-75 5 2 90 cm violet 1150 0140 3 2/0 75 cm violet 1130 0148 3.5 0 90 cm violet 1135 0148 4 1 90 cm violet 1140 0148 5 2 90 cm violet 1150 0148 Round bodied taper point Metric USP Length Order number 3/8 Circle DR 17 mm DR 25 mm 1.5 4/0 75 cm violet 1115 0217 2 3/0 75 cm violet 1120 0217 3.5 0 75 cm violet 1135 0225 4 1 75 cm violet 1140 0225 Round bodied taper point Metric USP Length Order number 5/8 Circle FR 27 mm 2 3/0 75 cm violet 1120 0327 3 2/0 75 cm violet 1130 0327 Round bodied taper point Metric USP Length Order number J-needle JR 36 mm 3 2/0 75 cm violet 1130 3036 3.5 0 75 cm violet 1135 3036 Round bodied taper point Metric USP Length Order number 5/8 Circle J-needle JR 36 mm FR 27 mm 3.5 0 75 cm violet 1135 3036-0327 Surgicryl PGA Revision 4 Page 3

Round bodied taper point loop Metric USP Length Order number HR 50 mm 4 1 150 cm violet 1140 0950 Round bodied tapercut point Metric USP Length Order number HRT 26 mm 3 2/0 75 cm violet 1130 0526 HRT 30 mm HRT 36 mm HRT 40 mm 3 2/0 75 cm violet 1130 0530 3.5 0 75 cm violet 1135 0530 4 1 75 cm violet 1140 0530 3 2/0 90 cm violet 1130 0536 3.5 0 90 cm violet 1135 0536 4 1 90 cm violet 1140 0536 3 2/0 90 cm violet 1130 0540 3.5 0 90 cm violet 1135 0540 4 1 90 cm violet 1140 0540 HRT 48 mm 4 1 90 cm violet 1140 0548 Round bodied tapercut point Metric USP Length Order number J-needle JRT 31 mm 4 1 75 cm violet 1140 3131 Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm 0.7 6/0 45 cm violet 1107 1512 0.7 6/0 45 cm undyed 1107 1512U 1 5/0 45 cm violet 1110 1512 1.5 4/0 75 cm violet 1115 1512 Surgicryl PGA Revision 4 Page 4

Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm Easy Pass DS 16 mm DS 16 mm Easy Pass DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 24 mm Easy Pass 0.7 6/0 50 cm undyed 1107 1512UP 1 5/0 50 cm undyed 1110 1512UP 1.5 4/0 50 cm undyed 1115 1512UP 1 5/0 75 cm violet 1110 1516 1 5/0 75 cm undyed 1110 1516U 1.5 4/0 75 cm violet 1115 1516 1.5 4/0 75 cm undyed 1115 1516U 2 3/0 75 cm violet 1120 1516 1.5 4/0 50 cm undyed 1115 1516UP 1 5/0 75 cm violet 1110 1519 1.5 4/0 75 cm violet 1115 1519 1.5 4/0 75 cm undyed 1115 1519U 2 3/0 75 cm violet 1120 1519 2 3/0 75 cm undyed 1120 1519U 3 2/0 75 cm violet 1130 1519 1.5 4/0 50 cm undyed 1115 1519UP 2 3/0 50 cm undyed 1120 1519UP 3 2/0 50 cm undyed 1130 1519UP 2 3/0 75 cm violet 1120 1524 2 3/0 75 cm undyed 1120 1524U 3 2/0 75 cm violet 1130 1524 3 2/0 75 cm undyed 1130 1524U 3.5 0 75 cm violet 1135 1524 3.5 0 75 cm undyed 1135 1524U 2 3/0 50 cm undyed 1120 1524UP 3 2/0 50 cm undyed 1130 1524UP DS 26 mm 3 2/0 75 cm undyed 1130 1526U DS 30 mm 2 3/0 75 cm violet 1120 1530 3 2/0 75 cm violet 1130 1530 3 2/0 75 cm undyed 1130 1530U 3.5 0 75 cm violet 1135 1530 4 1 75 cm violet 1140 1530 5 2 75 cm violet 1150 1530 Surgicryl PGA Revision 4 Page 5

Reverse cutting Metric USP Length Order number 3/8 Circle DS 36 mm DS 40 mm 3 2/0 75 cm violet 1130 1536 3.5 0 75 cm violet 1135 1536 4 1 75 cm violet 1140 1536 5 2 75 cm violet 1150 1536 3 2/0 75 cm violet 1130 1540 3.5 0 75 cm violet 1135 1540 4 1 75 cm violet 1140 1540 5 2 75 cm violet 1150 1540 Reverse cutting Metric USP Length Order number HS 22 mm HS 26 mm 2 3/0 75 cm violet 1120 1422 2 3/0 75 cm undyed 1120 1422U 3 2/0 75 cm violet 1130 1422 3 2/0 75 cm undyed 1130 1422U 1.5 4/0 75 cm violet 1115 1426 2 3/0 75 cm violet 1120 1426 3 2/0 75 cm violet 1130 1426 3.5 0 75 cm violet 1135 1426 HS 30 mm 5 2 90 cm violet 1150 1430 3 2/0 90 cm violet 1130 1436 HS 36 mm 3.5 0 90 cm violet 1135 1436 4 1 90 cm violet 1140 1436 5 2 90 cm violet 1150 1436 3 2/0 90 cm violet 1130 1440 HS 40 mm 3.5 0 90 cm violet 1135 1440 4 1 90 cm violet 1140 1440 5 2 90 cm violet 1150 1440 3.5 0 90 cm violet 1135 1448 HS 48 mm 4 1 90 cm violet 1140 1448 5 2 90 cm violet 1150 1448 6 3&4 90 cm violet 1160 1448 Surgicryl PGA Revision 4 Page 6

Cutting Metric USP Length Order number Straight GS 60 mm 2 3/0 75 cm violet 1120 2160 2 3/0 75 cm undyed 1120 2160U 3 2/0 75 cm violet 1130 2160 Cutting Metric USP Length Order number 3/8 Circle NDS 16 mm 1 5/0 45 cm violet 1110 1716 Surgicryl PGA Revision 4 Page 7

Type Composition Braided and coated multifilament Polyglycolic acid Coating Polycaprolactone and calcium stearate (1%) Colour Tissue reaction Absorption Presentation Beige - undyed / Violet Minimal The hydrolytic action by which the material is broken down results in total absorption in approximately 42 days. Approximately 50% of tensile strength remain after 7 days. Box with 12 sutures For quality & safety Surgicryl Rapid Revision 4

CHARACTERISTICS High initial tensile strength Synthetic Breaks down by hydrolysis Braided structure Coated multifilament Hermetically sealed packing BENEFITS Excellent tissue support Minimal tissue reaction Predictable absorption rate, quick mass absorption Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues with minimal sawing, tissue drag and trauma Good knot tie down / adjustability Reduced capillary action Guaranteed seal and product sterility INDICATIONS especially in Superficial soft tissue CONTRAINDICATIONS closing of skin and mucosa only Plastic surgery Obstetrics (Episiotomy repair) Gynaecology Urology (Circumcision) Ophthalmic surgery (Conjunctiva) Pediatric surgery Cardiovascular surgery Neurosurgery Ligation When wound support for more than 7 days is required. Caution in patients with delayed wound healing (e.g. compromised immune system). 100% TENSILE STRENGTH ABSORPTION 0% 100% 90% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 7 14 21 28 35 42 49 56 63 70 77 84 91 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 2 3/0 150 cm undyed 1420 0015 3 2/0 150 cm undyed 1430 0015 3.5 0 150 cm undyed 1435 0015 4 1 150 cm undyed 1440 0015 5 2 150 cm undyed 1450 0015 6 3&4 150 cm violet 1460 0015 Round bodied taper point Metric USP Length Order number HR 17 mm HR 22 mm HR 26 mm HR 30 mm HR 36 mm HR 40 mm HR 48 mm 1 5/0 75 cm undyed 1410 0117 1.5 4/0 75 cm undyed 1415 0117 2 3/0 75 cm undyed 1420 0117 1.5 4/0 75 cm undyed 1415 0122 2 3/0 75 cm undyed 1420 0122 3 2/0 75 cm undyed 1430 0122 2 3/0 75 cm undyed 1420 0126 3 2/0 75 cm undyed 1430 0126 2 3/0 75 cm undyed 1420 0130 3 2/0 75 cm undyed 1430 0130 3.5 0 75 cm undyed 1435 0130 3 2/0 75 cm undyed 1430 0136 3.5 0 90 cm undyed 1435 0136 4 1 90 cm undyed 1440 0136 3 2/0 75 cm undyed 1430 0140 3.5 0 90 cm undyed 1435 0140 4 1 90 cm undyed 1440 0140 5 2 90 cm undyed 1450 0140 3 2/0 75 cm undyed 1430 0148 3.5 0 90 cm undyed 1435 0148 4 1 90 cm undyed 1440 0148 5 2 90 cm undyed 1450 0148 Surgicryl Rapid Revision 4 Page 1

Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 12 mm Easy Pass DS 16 mm DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 26 mm DS 36 mm 0.7 6/0 75 cm undyed 1407 1512 1 5/0 75 cm undyed 1410 1512 1.5 4/0 75 cm undyed 1415 1512 0.7 6/0 50 cm undyed 1407 1512P 1 5/0 50 cm undyed 1410 1512P 1.5 4/0 50 cm undyed 1415 1512P 1 5/0 75 cm undyed 1410 1516 1.5 4/0 75 cm undyed 1415 1516 2 3/0 45 cm undyed 1420 1516 1.5 4/0 75 cm undyed 1415 1519 2 3/0 75 cm undyed 1420 1519 3 2/0 75 cm undyed 1430 1519 1.5 4/0 50 cm undyed 1415 1519P 2 3/0 50 cm undyed 1420 1519P 2 3/0 75 cm undyed 1420 1524 3 2/0 75 cm undyed 1430 1524 2 3/0 75 cm undyed 1420 1526 3 2/0 75 cm undyed 1430 1526 3.5 0 75 cm undyed 1435 1526 3 2/0 75 cm undyed 1430 1536 3.5 0 75 cm undyed 1435 1536 Reverse cutting Metric USP Length Order number HS 17 mm HS 36 mm HS 40 mm 1.5 4/0 45 cm undyed 1415 1417 2 3/0 45 cm undyed 1420 1417 3 2/0 75 cm undyed 1430 1436 3.5 0 75 cm undyed 1435 1436 4 1 90 cm undyed 1440 1440 5 2 90 cm undyed 1450 1440 Surgicryl Rapid Revision 4 Page 2

Cutting Metric USP Length Order number Straight GS 60 mm 2 3/0 75 cm undyed 1420 2160 Round bodied tapercut point Metric USP Length Order number HRT 17 mm 2 3/0 75 cm undyed 1420 0517 HRT 26 mm HRT 36 mm HRT 40 mm 2 3/0 75 cm undyed 1420 0526 3 2/0 75 cm undyed 1430 0526 3 2/0 90 cm undyed 1430 0536 3.5 0 90 cm undyed 1435 0536 4 1 90 cm undyed 1440 0536 3.5 0 90 cm undyed 1435 0540 4 1 90 cm undyed 1440 0540 5 2 90 cm undyed 1450 0540 Round bodied tapercut point Metric USP Length Order number 3/8 Circle DRT 16 mm 1 5/0 75 cm undyed 1410 0416 1.5 4/0 75 cm undyed 1415 0416 2 3/0 75 cm undyed 1420 0416 Surgicryl Rapid Revision 4 Page 3

Type Monofilament Composition Polyglecaprone 25, a copolymer made of 75% glycolide and 25% Є-caprolactone Coating Colour Tissue reaction Absorption Presentation None Violet / Beige - undyed Minimal The hydrolytic action by which the material is broken down results in total absorption in approximately 90 to 120 days. Approximately 60% of tensile strength remain after 7 days. Box with 12 sutures For quality & safety Surgicryl Monofast Revision 4

CHARACTERISTICS High tensile strength Synthetic Breaks down by hydrolysis Monofilament with microscopic uniform diameter Pliability and softness Hermetically sealed packing BENEFITS Excellent tissue support Minimal tissue reaction Predictable absorption rate Soft passage through the tissues without sawing, tissue drag and trauma Absence of capillarity (no support of bacterial growth) Excellent knot tie down Good handling properties Easy and secure knotting Guaranteed seal and product sterility INDICATIONS especially in Superficial soft tissue and/or ligation General surgery Skin closure Plastic surgery CONTRAINDICATIONS Cardiovascular surgery Neurosurgery Ophthalmic surgery Being absorbable not to use when an extended wound support is required. Gastrointestinal surgery Gynaecology Urology Caution in patients with delayed wound healing (e.g. compromised immune system). 100% 90% TENSILE STRENGTH ABSORPTION 0% 100% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 7 14 21 28 35 42 49 56 63 70 77 84 91 98 105 112 119 126 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 3 2/0 150 cm violet 1630 0015 3.5 0 150 cm violet 1635 0015 4 1 150 cm violet 1640 0015 5 2 120 cm violet 1650 0012 5 2 150 cm violet 1650 0015 Without needle Metric USP Length Order number Ligapack 5 2 250 cm violet 1650 0025 Round bodied taper point Metric USP Length Order number HR 13 mm 0.7 6/0 45 cm violet 1607 0113 HR 17 mm 1 5/0 45 cm violet 1610 0117 1.5 4/0 75 cm violet 1615 0117 2 3/0 75 cm violet 1620 0117 HR 19 mm 3 2/0 75 cm violet 1630 0119 HR 22 mm HR 26 mm HR 30 mm HR 36 mm 1.5 4/0 75 cm violet 1615 0122 2 3/0 75 cm violet 1620 0122 3 2/0 75 cm violet 1630 0122 1.5 4/0 75 cm violet 1615 0126 2 3/0 75 cm violet 1620 0126 3 2/0 75 cm violet 1630 0126 3.5 0 75 cm violet 1635 0126 4 1 75 cm violet 1640 0126 2 3/0 75 cm violet 1620 0130 3 2/0 75 cm violet 1630 0130 3.5 0 75 cm violet 1635 0130 4 1 75 cm violet 1640 0130 2 3/0 75 cm violet 1620 0136 3 2/0 75 cm violet 1630 0136 3.5 0 90 cm violet 1635 0136 4 1 90 cm violet 1640 0136 Surgicryl Monofast Revision 4 Page 1

Round bodied taper point Metric USP Length Order number HR 40 mm HR 48 mm 3 2/0 75 cm violet 1630 0140 3.5 0 90 cm violet 1635 0140 4 1 90 cm violet 1640 0140 3.5 0 90 cm violet 1635 0148 4 1 90 cm violet 1640 0148 Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 12 mm Easy Pass DS 16 mm DS 16 mm Easy Pass DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 26 mm DS 40 mm 0.7 6/0 45 cm undyed 1607 1512 1 5/0 45 cm undyed 1610 1512 1.5 4/0 45 cm undyed 1615 1512 0.7 6/0 50 cm undyed 1607 1512P 1 5/0 50 cm undyed 1610 1512P 1.5 4/0 50 cm undyed 1615 1512P 1 5/0 75 cm undyed 1610 1516 1.5 4/0 75 cm undyed 1615 1516 2 3/0 75 cm undyed 1620 1516 1 5/0 50 cm undyed 1610 1516P 1.5 4/0 50 cm undyed 1615 1516P 1 5/0 45 cm undyed 1610 1519 1.5 4/0 75 cm undyed 1615 1519 2 3/0 75 cm undyed 1620 1519 3 2/0 75 cm undyed 1630 1519 1 4/0 50 cm undyed 1615 1519P 1.5 3/0 50 cm undyed 1620 1519P 2 3/0 75 cm undyed 1620 1524 3 2/0 75 cm undyed 1630 1524 1.5 4/0 75 cm undyed 1615 1526 2 3/0 75 cm undyed 1620 1526 3 2/0 75 cm undyed 1630 1526 3.5 0 75 cm undyed 1635 1540 4 1 75 cm undyed 1640 1540 Surgicryl Monofast Revision 4 Page 2

Reverse cutting Metric USP Length Order number HS 36 mm 3 2/0 75 cm undyed 1630 1436 3.5 0 75 cm undyed 1635 1436 HS 40 mm 4 1 90 cm undyed 1640 1440 Cutting Metric USP Length Order number Straight GS 60 mm 2 3/0 75 cm undyed 1620 2160 3 2/0 75 cm undyed 1630 2160 Blunt Metric USP Length Order number HRB 40 mm 3.5 0 90 cm violet 1635 1840 HRB 48 mm 4 1 90 cm violet 1640 1848 Round bodied taper point loop Metric USP Length Order number HR 48 mm 4 1 150 cm violet 1640 0948 Surgicryl Monofast Revision 4 Page 3

Type Composition Coating Colour Tissue reaction Absorption Presentation Monofilament Polydioxanone, a polymer made from polyester poly (p-dioxanone) None Violet Minimal The hydrolytic action by which the material is broken down results in total absorption in approximately 180 to 210 days. Approximately 50% of tensile strength remain after 42 days. Box with 12 sutures For quality & safety Surgicryl Monofilament Revision 4

CHARACTERISTICS High and long-lasting tensile strength Synthetic Breaks down by hydrolysis Monofilament with microscopic uniform diameter Pliability and softness Hermetically sealed packing BENEFITS Outstanding strength retention for extended wound support Minimal tissue reaction Predictable absorption rate Soft passage through the tissues without sawing, tissue drag and trauma Absence of capillarity (no support of bacterial growth) Excellent knot tie down Good handling properties Easy and secure knotting Guaranteed seal and product sterility INDICATIONS especially in General soft tissue closing General surgery Gastrointestinal surgery Ophthalmic surgery Orthopaedics Abdominal wall closure Gynaecology Plastic surgery Urology CONTRAINDICATIONS Cardiovascular surgery Neurosurgery Prosthetic devices Being absorbable not to use when wound support for more than 6 weeks is required. Caution in patients with delayed wound healing (e.g. compromised immune system). 100% 90% TENSILE STRENGTH ABSORPTION 0% 100% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 30 7 14 21 28 35 42 49 56 63 70 77 84 91 98 210 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 5 2 150 cm violet 1350 0015 6 3&4 150 cm violet 1360 0015 Round bodied taper point Metric USP Length Order number HR 13 mm 0.7 6/0 75 cm violet 1307 0113 HR 17 mm HR 22 mm HR 26 mm HR 30 mm HR 36 mm HR 40 mm HR 48 mm 0.7 6/0 75 cm violet 1307 0117 1 5/0 75 cm violet 1310 0117 1.5 4/0 75 cm violet 1315 0117 1.5 4/0 75 cm violet 1315 0122 2 3/0 75 cm violet 1320 0122 1.5 4/0 75 cm violet 1315 0126 2 3/0 75 cm violet 1320 0126 3 2/0 75 cm violet 1330 0126 3.5 0 75 cm violet 1335 0126 2 3/0 75 cm violet 1320 0130 3 2/0 75 cm violet 1330 0130 3.5 0 75 cm violet 1335 0130 3 2/0 75 cm violet 1330 0136 3.5 0 90 cm violet 1335 0136 4 1 90 cm violet 1340 0136 3.5 0 90 cm violet 1335 0140 4 1 90 cm violet 1340 0140 5 2 90 cm violet 1350 0140 3.5 0 90 cm violet 1335 0148 4 1 90 cm violet 1340 0148 5 2 90 cm violet 1350 0148 Blunt loop Metric USP Length Order number HRB 50 mm 4 1 150 cm violet 1340 1850 Surgicryl Monofilament Revision 4 Page 1

Round bodied taper point loop Metric USP Length Order number HR 40 mm HR 50 mm 3.5 0 150 cm violet 1335 0940 4 1 150 cm violet 1340 0940 3.5 0 150 cm violet 1335 0950 4 1 150 cm violet 1340 0950 5 2 150 cm violet 1350 0950 Reverse cutting Metric USP Length Order number DS 12 mm 0.7 6/0 45 cm violet 1307 1512 1 5/0 45 cm violet 1310 1512 1.5 4/0 75 cm violet 1315 1512 DS 16 mm 1 5/0 75 cm violet 1310 1516 3/8 Circle DS 19 mm DS 24 mm DS 26 mm DS 30 mm DS 40 mm 1 5/0 45 cm violet 1310 1519 1.5 4/0 75 cm violet 1315 1519 2 3/0 75 cm violet 1320 1519 1.5 4/0 75 cm violet 1315 1524 2 3/0 75 cm violet 1320 1524 3 2/0 75 cm violet 1330 1524 3.5 0 75 cm violet 1335 1524 2 3/0 75 cm violet 1320 1526 3 2/0 75 cm violet 1330 1526 3 2/0 75 cm violet 1330 1530 3.5 0 75 cm violet 1335 1530 4 1 90 cm violet 1340 1540 5 2 90 cm violet 1350 1540 Reverse cutting Metric USP Length Order number HS 36 mm 3 2/0 75 cm violet 1330 1436 3.5 0 75 cm violet 1335 1436 4 1 75 cm violet 1340 1436 HS 48 mm 4 1 90 cm violet 1340 1448 Surgicryl Monofilament Revision 4 Page 2

Type Composition Coating Colour Tissue reaction Absorption Presentation Twisted multifilament with a monofilament appearance Strands of purified collagen taken from the serosal layer of selected bovines. Origin from BSE-free classified countries. None Ivory Moderate By phagocytosis. Complete mass absorption in approximately 63 days. Approximately 50% of tensile strength remain after 7 days. When used in infected tissues or in tissues with increased levels of proteolytic enzymes (stomach, cervix, vagina) it is more quickly absorbed. Box with 12 sutures For quality & safety Catgut Plain Revision 4

CHARACTERISTICS High tensile strength Absorption by phagocytosis Twisted structure Uniform diameter by centerless polishing (monofilament appearance) Hermetically sealed packing BENEFITS Excellent tissue support Uniform absorption Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues without sawing, tissue drag and trauma Excellent knot tie down Guaranteed seal and product sterility INDICATIONS General soft tissue closing and/or ligation CONTRAINDICATIONS Cardiovascular surgery Neurosurgery especially in General surgery Gastrointestinal surgery Being absorbable not to use when an extended wound support is required. Gynaecology Obstetrics Urology Ophthalmic surgery Caution in patients with delayed wound healing (e.g. compromised immune system). In the region of infected wounds Known sensitivities or allergies to collagen 100% 90% TENSILE STRENGTH ABSORPTION 0% 100% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 7 14 21 28 35 42 49 56 63 70 77 84 91 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 2 4/0 150 cm ivory 120 0015 3 3/0 150 cm ivory 130 0015 3.5 2/0 150 cm ivory 135 0015 4 0 150 cm ivory 140 0015 5 1 150 cm ivory 150 0015 6 2 150 cm ivory 160 0015 7 3 150 cm ivory 170 0015 Round bodied taper point Metric USP Length Order number HR 16 mm HR 20 mm HR 26 mm HR 37 mm HR 45 mm 1.5 5/0 75 cm ivory 115 0116 2 4/0 75 cm ivory 120 0116 2 4/0 75 cm ivory 120 0120 3 3/0 75 cm ivory 130 0120 3.5 2/0 75 cm ivory 135 0120 2 4/0 75 cm ivory 120 0126 3 3/0 75 cm ivory 130 0126 3.5 2/0 75 cm ivory 135 0126 4 0 75 cm ivory 140 0126 3 3/0 75 cm ivory 130 0137 3.5 2/0 75 cm ivory 135 0137 4 0 75 cm ivory 140 0137 5 1 75 cm ivory 150 0137 4 0 75 cm ivory 140 0145 5 1 75 cm ivory 150 0145 6 2 75 cm ivory 160 0145 HR 50 mm 3.5 2/0 75 cm ivory 135 0150 Catgut Plain Revision 4 Page 1

Round bodied taper point double armed Metric USP Length Order number HR 37 mm HR 75 mm 3 3/0 90 cm ivory 130 0137-0175 Reverse cutting Metric USP Length Order number DS 12 mm 1.5 5/0 45 cm ivory 115 1512 3/8 Circle DS 16 mm DS 19 mm DS 24 mm DS 37 mm 1 6/0 45 cm ivory 110 1516 1.5 5/0 75 cm ivory 115 1516 2 4/0 75 cm ivory 120 1516 3 3/0 75 cm ivory 130 1516 2 4/0 75 cm ivory 120 1519 3 3/0 75 cm ivory 130 1519 3.5 2/0 75 cm ivory 140 1519 2 4/0 75 cm ivory 120 1524 3 3/0 75 cm ivory 130 1524 3.5 2/0 75 cm ivory 135 1524 4 0 75 cm ivory 140 1524 3.5 2/0 75 cm ivory 135 1537 4 0 75 cm ivory 140 1537 Catgut Plain Revision 4 Page 2

Type Composition Coating Colour Tissue reaction Absorption Presentation Twisted multifilament with a monofilament appearance Strands of purified collagen taken from the serosal layer of selected bovines, tanned with chrome salts. Origin from BSE-free classified countries. None Dark brown Moderate By phagocytosis. The rate of absorption is slowed down by chromizing. Complete mass absorption in approximately 90 days. Approximately 50% of tensile strength remain after 14 days. When used in infected tissues or in tissues with increased levels of proteolytic enzymes (stomach, cervix, vagina) it is more quickly absorbed. Box with 12 sutures For quality & safety Catgut Chrome Revision 4

CHARACTERISTICS High tensile strength Absorption by phagocytosis Twisted structure Uniform diameter by centerless polishing (monofilament appearance) Hermetically sealed packing BENEFITS Excellent tissue support Uniform absorption Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues without sawing, tissue drag and trauma Excellent knot tie down Guaranteed seal and product sterility INDICATIONS General soft tissue closing and/or ligation CONTRAINDICATIONS Cardiovascular surgery Neurosurgery especially in General surgery Gastrointestinal surgery Being absorbable not to use when an extended wound support is required. Gynaecology Obstetrics Urology Ophthalmic surgery Caution in patients with delayed wound healing (e.g. compromised immune system). In the region of infected wounds Known sensitivities or allergies to collagen or chromium 100% 90% TENSILE STRENGTH ABSORPTION 0% 100% 80% 70% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 7 14 21 28 35 42 49 56 63 70 77 84 91 Weeks Days 60% 50% 40% 30% 20% 10% 0 0 1 2 3 4 5 6 7 8 9 10 11 12 7 14 21 28 35 42 49 56 63 70 77 84 Weeks Days

Without needle Metric USP Length Order number 1 5/0 150 cm brown 210 0015 2 4/0 150 cm brown 220 0015 3 3/0 150 cm brown 230 0015 3.5 2/0 150 cm brown 235 0015 4 0 150 cm brown 240 0015 5 1 150 cm brown 250 0015 6 2 150 cm brown 260 0015 7 3 150 cm brown 270 0015 8 4 150 cm brown 280 0015 10 6 150 cm brown 2100 0015 Round bodied taper point Metric USP Length Order number HR 15 mm HR 20 mm HR 26 mm HR 30 mm 1 6/0 75 cm brown 210 0115 1.5 5/0 75 cm brown 215 0115 2 4/0 75 cm brown 220 0115 1.5 5/0 75 cm brown 215 0120 2 4/0 75 cm brown 220 0120 3 3/0 75 cm brown 230 0120 3.5 2/0 75 cm brown 235 0120 4 0 75 cm brown 240 0120 1.5 5/0 75 cm brown 215 0126 2 4/0 75 cm brown 220 0126 3 3/0 75 cm brown 230 0126 3.5 2/0 75 cm brown 235 0126 4 0 75 cm brown 240 0126 5 1 75 cm brown 250 0126 2 4/0 75 cm brown 220 0130 3 3/0 75 cm brown 230 0130 3.5 2/0 75 cm brown 235 0130 4 0 75 cm brown 240 0130 5 1 75 cm brown 250 0130 HR 35 mm 6 2 75 cm brown 260 0135 Catgut Chrom Revision 4 Page 1

Round bodied taper point Metric USP Length Order number HR 37 mm HR 40 mm HR 45 mm HR 48 mm HR 50 mm 2 4/0 75 cm brown 220 0137 3 3/0 75 cm brown 230 0137 3.5 2/0 75 cm brown 235 0137 4 0 75 cm brown 240 0137 5 1 75 cm brown 250 0137 3.5 2/0 75 cm brown 235 0140 4 0 75 cm brown 240 0140 5 1 75 cm brown 250 0140 6 2 75 cm brown 260 0140 3.5 2/0 75 cm brown 235 0145 4 0 75 cm brown 240 0145 5 1 75 cm brown 250 0145 6 2 75 cm brown 260 0145 5 1 75 cm brown 250 0148 6 2 75 cm brown 260 0148 3.5 2/0 75 cm brown 235 0150 6 2 75 cm brown 260 0150 6 2 90 cm brown 260 0150-90 Round bodied taper point reverse cutting double armed Metric USP Length Order number HR 37 mm HS 37 mm 3.5 2/0 150 cm brown 235 0137-1437 Catgut Chrom Revision 4 Page 2

Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 16 mm DS 19 mm DS 24 mm DS 30 mm DS 37 mm DS 40 mm 1 6/0 45 cm brown 210 1512 1.5 5/0 45 cm brown 215 1512 1.5 5/0 75 cm brown 215 1516 2 4/0 75 cm brown 220 1516 3 3/0 75 cm brown 230 1516 3.5 2/0 75 cm brown 235 1516 1.5 5/0 75 cm brown 215 1519 2 4/0 75 cm brown 220 1519 3 3/0 75 cm brown 230 1519 3.5 2/0 75 cm brown 235 1519 2 4/0 75 cm brown 220 1524 3 3/0 75 cm brown 230 1524 3.5 2/0 75 cm brown 235 1524 4 0 75 cm brown 240 1524 5 1 75 cm brown 250 1524 3 3/0 75 cm brown 230 1430 3.5 2/0 75 cm brown 235 1530 4 0 75 cm brown 240 1530 5 1 75 cm brown 250 1530 3 3/0 75 cm brown 230 1537 3.5 2/0 75 cm brown 235 1537 4 0 75 cm brown 240 1537 5 1 75 cm brown 250 1537 3.5 2/0 75 cm brown 235 1540 6 2 75 cm brown 260 1540 Reverse cutting Metric USP Length Order number HS 37 mm 4 0 75 cm brown 240 1437 5 1 75 cm brown 250 1437 Catgut Chrom Revision 4 Page 3

Cutting Metric USP Length Order number 3/8 Circle NDS 16 mm 1.5 5/0 75 cm brown 215 1716 Blunt Metric USP Length Order number 3/8 Circle DRB 63 mm 5 1 75 cm brown 250 1963 DRB 85 mm 5 1 75 cm brown 250 1985 Catgut Chrom Revision 4 Page 4

Type Composition Coating Colour Tissue reaction Absorption Presentation Monofilament Polypropylene, a polymer of propylene None Blue Minimal Non absorbable Box with 12 sutures For quality & safety Polypropylene Revision 4

CHARACTERISTICS High tensile strength, non absorbable Resistance to repeated bending Synthetic Monofilament with microscopic uniform diameter Pliability and softness Hermetically sealed packing BENEFITS Excellent and permanent tissue support Use in cardiovascular surgery (heart prosthesis or vascular anastomosis) Minimal tissue reaction Soft passage through the tissues without sawing, tissue drag and trauma Absence of capillarity (no support of bacterial growth) Excellent knot tie down Good handling properties Easy and secure knotting Guaranteed seal and product sterility INDICATIONS especially in General soft tissue closing and/or ligation Cardiovascular surgery Neurosurgery Ophthalmic surgery Microsurgery Plastic surgery Skin closure Orthopaedics Hernias (also as a mesh) Gastrointestinal surgery General surgery Gynaecology Obstetrics

Round bodied taper point Metric USP Length Order number HR 10 mm HR 15 mm HR 17 mm HR 20 mm HR 25 mm HR 30 mm HR 35 mm HR 40 mm 0.5 7/0 45 cm blue 505 0110 0.7 6/0 75 cm blue 507 0110 0.7 6/0 75 cm blue 507 0115 1 5/0 75 cm blue 510 0115 1.5 4/0 75 cm blue 515 0115 1 5/0 75 cm blue 510 0117 2 3/0 75 cm blue 520 0117 1 5/0 75 cm blue 510 0120 1.5 4/0 75 cm blue 515 0120 2 3/0 75 cm blue 520 0120 1 5/0 75 cm blue 510 0125 1.5 4/0 75 cm blue 515 0125 2 3/0 75 cm blue 520 0125 3 2/0 75 cm blue 530 0125 3.5 0 75 cm blue 535 0125 4 1 75 cm blue 540 0125 2 3/0 75 cm blue 520 0130 3 2/0 75 cm blue 530 0130 3.5 0 75 cm blue 535 0130 4 1 75 cm blue 540 0130 3 2/0 75 cm blue 530 0135 3.5 0 75 cm blue 535 0135 4 1 75 cm blue 540 0135 3.5 0 75 cm blue 535 0140 4 1 90 cm blue 540 0140 5 2 75 cm blue 550 0140 Round bodied taper point double armed 2 x HR 8 mm 2 x HR 10 mm Metric USP Length Order number 0.4 8/0 60 cm blue 504 0108-2 0.5 7/0 60 cm blue 505 0108-2 0.7 6/0 60 cm blue 507 0108-2 0.5 7/0 60 cm blue 505 0110-2 0.7 6/0 60 cm blue 507 0110-2 1 5/0 60 cm blue 510 0110-2 Polypropylene Revision 4 Page 1

Round bodied taper point double armed 2 x HR 13 mm Metric USP Length Order number 0.7 6/0 60 cm blue 507 0113-2 1 5/0 75 cm blue 510 0113-2 2 x HR 15 mm 1.5 4/0 90 cm blue 515 0115-2 2 x HR 16 mm 2 x HR 20 mm 2 x HR 25 mm 2 x HR 30 mm 1 5/0 90 cm blue 510 0116-2 1.5 4/0 90 cm blue 515 0116-2 2 3/0 90 cm blue 520 0116-2 1 5/0 90 cm blue 510 0120-2 1.5 4/0 90 cm blue 515 0120-2 1.5 4/0 90 cm blue 515 0125-2 2 3/0 90 cm blue 520 0125-2 3 2/0 90 cm blue 530 0125-2 2 3/0 90 cm blue 520 0130-2 3 2/0 90 cm blue 530 0130-2 2 x HR 35 mm 3 2/0 90 cm blue 530 0135-2 HR 15 mm HR 30 mm 2 3/0 90 cm blue 520 0115-30 Round bodied taper point double armed 3/8 Circle 2 x DR 8 mm Metric USP Length Order number 0.4 8/0 45 cm blue 504 0208-2 0.5 7/0 60 cm blue 505 0208-2 2 x DR 10 mm 0.7 6/0 60 cm blue 507 0210-2 2 x DR 13 mm 0.7 6/0 60 cm blue 507 0213-2 Polypropylene Revision 4 Page 2

Soft cutting point coronary double armed 3/8 Circle 2 x CC 8 mm 2 x CC 13 mm Metric USP Length Order number 0.4 8/0 60 cm blue 504 2608-2 0.5 7/0 75 cm blue 505 2608-2 0.7 6/0 75 cm blue 507 2608-2 0.5 7/0 75 cm blue 505 2613-2 0.7 6/0 75 cm blue 507 2613-2 1 5/0 75 cm blue 510 2613-2 Soft cutting point coronary black double armed 3/8 Circle 2 x CC 8 mm black 2 x CC 13 mm black Metric USP Length Order number 0.4 8/0 60 cm blue 504 2608-2VB 0.5 7/0 75 cm blue 505 2608-2VB 0.7 6/0 75 cm blue 507 2608-2VB 0.7 6/0 75 cm blue 507 2613-2VB 1 5/0 75 cm blue 510 2613-2VB Reverse cutting Metric USP Length Order number 3/8 Circle DS 10 mm 0.7 6/0 45 cm blue 507 1510 0.5 7/0 45 cm blue 505 1512 DS 12 mm 0.7 6/0 45 cm blue 507 1512 1 5/0 45 cm blue 510 1512 1.5 4/0 75 cm blue 515 1512 DS 12 mm 0.7 6/0 50 cm blue 507 1512P Easy Pass 1 5/0 50 cm blue 510 1512P 0.7 6/0 45 cm blue 507 1516 DS 16 mm 1 5/0 45 cm blue 510 1516 1.5 4/0 75 cm blue 515 1516 2 3/0 75 cm blue 520 1516 0.7 6/0 50 cm blue 507 1516P DS 16 mm 1 5/0 50 cm blue 510 1516P Easy Pass 1.5 4/0 50 cm blue 515 1516P 0.7 6/0 75 cm blue 507 1519 1 5/0 75 cm blue 510 1519 DS 19 mm 1.5 4/0 75 cm blue 515 1519 2 3/0 75 cm blue 520 1519 3 2/0 75 cm blue 530 1519 3.5 0 75 cm blue 535 1519 Polypropylene Revision 4 Page 3

Reverse cutting Metric USP Length Order number DS 19 mm Easy Pass DS 24 mm DS 24 mm Easy Pass 1 5/0 50 cm blue 510 1519P 1.5 4/0 50 cm blue 515 1519P 2 3/0 50 cm blue 520 1519P 3 2/0 50 cm blue 530 1519P 1.5 4/0 75 cm blue 515 1524 2 3/0 75 cm blue 520 1524 3 2/0 75 cm blue 530 1524 3.5 0 75 cm blue 535 1524 4 1 75 cm blue 540 1524 2 3/0 50 cm blue 520 1524P 3 2/0 50 cm blue 530 1524P 3/8 Circle DS 26 mm 3 2/0 75 cm blue 530 1526 2 3/0 75 cm blue 520 1530 DS 30 mm 3 2/0 75 cm blue 530 1530 3.5 0 75 cm blue 535 1530 4 1 75 cm blue 540 1530 2 3/0 75 cm blue 520 1536 DS 36 mm 3 2/0 75 cm blue 530 1536 3.5 0 75 cm blue 535 1536 4 1 75 cm blue 540 1536 2 3/0 75 cm blue 520 1540 3 2/0 75 cm blue 530 1540 DS 40 mm 3.5 0 75 cm blue 535 1540 4 1 90 cm blue 540 1540 5 2 90 cm blue 550 1540 DS 45 mm 4 1 90 cm blue 540 1545 DS 90 mm 4 1 90 cm blue 540 1590 Reverse cutting Metric USP Length Order number HS 22 mm 2 3/0 45 cm blue 520 1422 Polypropylene Revision 4 Page 4

Cutting Metric USP Length Order number GS 40 mm 3 2/0 75 cm blue 530 2140 Straight GS 60 mm 1.5 4/0 90 cm blue 515 2160 2 3/0 75 cm blue 520 2160 3 2/0 75 cm blue 530 2160 Round bodied tapercut point Metric USP Length Order number HRT 10 mm 0.7 6/0 75 cm blue 507 0510 HRT 25 mm 3 2/0 75 cm blue 530 0525 Round bodied tapercut point double armed Metric USP Length Order number 2 x HRT 13 mm 1 5/0 75 cm blue 510 0513-2 2 x HRT 22 mm 1.5 4/0 90 cm blue 515 0522-2 2 x HRT 25 mm 2 x HRT 30 mm 1.5 4/0 90 cm blue 515 0525-2 2 3/0 90 cm blue 520 0525-2 3 2/0 90 cm blue 530 0525-2 2 3/0 90 cm blue 520 0530-2 3 2/0 90 cm blue 530 0530-2 Round bodied taper point loop Metric USP Length Order number HR 40 mm 3 2/0 150 cm blue 530 0940 Polypropylene Revision 4 Page 5

Type Monofilament Composition Extrusion of polyamide 6.0 or 6.6 Coating Colour Tissue reaction Absorption Presentation None Blue Black Minimal Non absorbable, gradually encapsulated by connective tissue. The thread mass diminishes, approximately 10% a year by rupture of chemical links (hydrolytic action). Box with 12 sutures For quality & safety Daclon Nylon Revision 4

CHARACTERISTICS High tensile strength, non absorbable Synthetic Monofilament with microscopic uniform diameter Pliability and softness Hermetically sealed packing BENEFITS Excellent and permanent tissue support Minimal tissue reaction Soft passage through the tissues without sawing, tissue drag and trauma Absence of capillarity (no support of bacterial growth) Excellent knot tie down Good handling properties Easy and secure knotting Guaranteed seal and product sterility INDICATIONS Daclon Blue especially in Daclon Black especially in General soft tissue closing and/or ligation Skin closure General surgery Plastic surgery Gastrointestinal surgery Gynaecology Obstetrics Orthopaedics Plastic surgery Ophthalmic surgery

Without needle Metric USP Length Order number 3.5 0 150 cm blue 935 0015 4 1 150 cm blue 940 0015 Round bodied taper point Metric USP Length Order number HR 16 mm 1 5/0 75 cm black 910 0116 1.5 4/0 75 cm blue 915 0116 HR 18 mm 1.5 4/0 75 cm blue 915 0118 HR 20 mm HR 22 mm HR 26 mm HR 30 mm HR 37 mm HR 40 mm 0.7 6/0 75 cm black 907 0120 1 5/0 75 cm black 910 0120 1.5 4/0 75 cm blue 915 0120 2 3/0 75 cm blue 920 0120 3 2/0 75 cm blue 930 0120 2 3/0 75 cm blue 920 0122 3 2/0 75 cm blue 930 0122 1.5 4/0 75 cm blue 915 0126 2 3/0 75 cm blue 920 0126 3 2/0 75 cm blue 930 0126 3.5 0 75 cm blue 935 0126 4 1 75 cm blue 940 0126 3 2/0 75 cm blue 930 0130 3.5 0 75 cm blue 935 0130 4 1 75 cm blue 940 0130 3 2/0 75 cm blue 930 0137 3.5 0 75 cm blue 935 0137 4 1 75 cm blue 940 0137 3 2/0 75 cm blue 930 0140 3.5 0 75 cm blue 935 0140 4 1 75 cm blue 940 0140 5 2 75 cm blue 950 0140 HR 50 mm 4 1 100 cm blue 940 0150 Daclon Revision 4 Page 1

Round bodied taper point loop Metric USP Length Order number HR 30 mm 3.5 0 150 cm blue 935 0930 HR 35 mm 4 1 150 cm blue 940 0935 HR 40 mm 3.5 0 150 cm blue 935 0940 4 1 150 cm blue 940 0940 HR 50 mm 3.5 0 150 cm blue 935 0950 4 1 150 cm blue 940 0950 Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 12 mm Easy Pass DS 16 mm DS 16 mm Easy Pass 0.5 7/0 75 cm black 905 1512 0.7 6/0 75 cm black 907 1512 1 5/0 75 cm black 910 1512 1.5 4/0 75 cm blue 915 1512 0.7 6/0 50 cm black 907 1512P 1 5/0 50 cm black 910 1512P 1.5 4/0 50 cm blue 915 1512P 0.7 6/0 45 cm black 907 1516-45 0.7 6/0 75 cm black 907 1516 1 5/0 75 cm black 910 1516 1.5 4/0 45 cm blue 915 1516-45 1.5 4/0 75 cm blue 915 1516 2 3/0 75 cm blue 920 1516 0.7 6/0 50 cm black 907 1516P 1 5/0 50 cm black 910 1516P 1.5 4/0 50 cm blue 915 1516P Daclon Revision 4 Page 2

Reverse cutting Metric USP Length Order number 3/8 Circle DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 24 mm Easy Pass DS 26 mm DS 30 mm 1 5/0 75 cm black 910 1519 1.5 4/0 45 cm blue 915 1519-45 1.5 4/0 75 cm blue 915 1519 2 3/0 45 cm blue 920 1519-45 2 3/0 75 cm blue 920 1519 3 2/0 75 cm blue 930 1519 1.5 4/0 50 cm blue 915 1519P 2 3/0 50 cm blue 920 1519P 3 2/0 50 cm blue 930 1519P 1 5/0 75 cm black 910 1524 1.5 4/0 45 cm blue 915 1524-45 1.5 4/0 75 cm blue 915 1524 2 3/0 45 cm blue 920 1524-45 2 3/0 75 cm blue 920 1524 3 2/0 75 cm blue 930 1524 3.5 0 75 cm blue 935 1524 4 1 75 cm blue 940 1524 3 2/0 50 cm blue 930 1524P 2 3/0 45 cm blue 920 1526-45 2 3/0 75 cm blue 920 1526 3 2/0 45 cm blue 930 1526-45 3 2/0 75 cm blue 930 1526 2 3/0 75 cm blue 920 1530 3 2/0 75 cm blue 930 1530 3.5 0 75 cm blue 935 1530 4 1 75 cm blue 940 1530 DS 36 mm 2 3/0 75 cm blue 920 1536 DS 40 mm DS 45 mm 3 2/0 75 cm blue 930 1540 3.5 0 75 cm blue 935 1540 4 1 75 cm blue 940 1540 5 2 90 cm blue 950 1540 3 2/0 100 cm blue 930 1545 4 1 75 cm blue 940 1545 5 2 90 cm blue 950 1545 Daclon Revision 4 Page 3

Reverse cutting Metric USP Length Order number 3/8 Circle DS 60 mm DS 90 mm 3 2/0 75 cm blue 930 1560 3.5 0 75 cm blue 935 1560 2 3/0 75 cm blue 920 1590 3 2/0 90 cm blue 930 1590 3.5 0 90 cm blue 935 1590 4 1 90 cm blue 940 1590 Reverse cutting Metric USP Length Order number HS 17 mm 1.5 4/0 75 cm blue 915 1417 2 3/0 75 cm blue 920 1417 HS 22 mm 2 3/0 75 cm blue 920 1422 HS 26 mm 2 3/0 75 cm blue 920 1426 3 2/0 75 cm blue 930 1426 HS 30 mm 3.5 0 75 cm blue 935 1430 HS 36 mm 3.5 0 75 cm blue 935 1436 4 1 75 cm blue 940 1436 5 2 75 cm blue 950 1436 HS 40 mm 4 1 75 cm blue 940 1440 HS 48 mm 4 1 100 cm blue 940 1448 Cutting Metric USP Length Order number Straight GS 60 mm 2 3/0 75 cm blue 920 2160 3 2/0 75 cm blue 930 2160 Daclon Revision 4 Page 4

Cutting Metric USP Length Order number NDS 16 mm 1 5/0 75 cm black 910 1716 3/8 Circle NDS 26 mm 2 3/0 75 cm blue 920 1726 NDS 30 mm 3 2/0 75 cm blue 930 1730 NDS 40 mm 3 2/0 75 cm blue 930 1740 Daclon Revision 4 Page 5

Type Composition Colour Tissue reaction Absorption Presentation Twisted and coated multifilament Sizes 5/0 and 6/0 monofilament Polyamide 6.6 strands enclosed in a polyamide 6 sheet Black Minimal Non absorbable, gradually encapsulated by connective tissue Box with 12 sutures For quality & safety Supramid Revision 4

CHARACTERISTICS High tensile strength, non absorbable Synthetic Twisted structure Multifilament in a sheath Pliability and softness Hermetically sealed packing BENEFITS Excellent and permanent tissue support Minimal tissue reaction Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues without sawing, tissue drag and trauma Good knot tie down / adjustability Reduced capillary action Good handling properties Easy and secure knotting Guaranteed seal and product sterility INDICATIONS especially in General soft tissue closing and/or ligation Skin closure

Without needle Metric USP Length Order number 5 2 250 cm black 450 0025 Round bodied taper point Metric USP Length Order number 1.5 4/0 75 cm black 415 0116 HR 16 mm 2 3/0 75 cm black 420 0116 HR 20 mm 2 3/0 45 cm black 420 0120 HR 26 mm 3 2/0 75 cm black 430 0126 Round bodied taper point Metric USP Length Order number Straight GR 22 mm 1.5 4/0 50 cm black 415 2022 Reverse cutting Metric USP Length Order number HS 17 mm HS 20 mm 1.5 4/0 75 cm black 415 1417 2 3/0 75 cm black 420 1417 1 5/0 75 cm black 410 1420 1.5 4/0 75 cm black 415 1420 2 3/0 75 cm black 420 1420 HS 22 mm 1.5 4/0 75 cm black 415 1422 HS 26 mm 1.5 4/0 75 cm black 415 1426 2 3/0 75 cm black 420 1426 Cutting Metric USP Length Order number Straight GS 20 mm 1.5 4/0 50 cm black 415 2120 GS 25 mm 1.5 4/0 60 cm black 415 2125 Supramid Revision 4 Page 1

Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 16 mm DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 36 mm 0.7 6/0 75 cm black 407 1512 1.5 4/0 45 cm black 415 1512 0.7 6/0 75 cm black 407 1516 1 5/0 75 cm black 410 1516 1.5 4/0 45 cm black 415 1516 1.5 4/0 75 cm black 415 1516-75 2 3/0 45 cm black 420 1516 0.7 6/0 75 cm black 407 1519 1 5/0 75 cm black 410 1519 1.5 4/0 45 cm black 415 1519 1.5 4/0 75 cm black 415 1519-75 2 3/0 75 cm black 420 1519 3 2/0 75 cm black 430 1519 1.5 4/0 75 cm black 415 1519P-75 2 3/0 75 cm black 420 1524 3 2/0 75 cm black 430 1524 3.5 0 75 cm black 435 1524 3 2/0 75 cm black 430 1536 3.5 0 75 cm black 435 1536 4 1 75 cm black 440 1536 Round bodied tapercut point Metric USP Length Order number HRT 18 mm 1.5 4/0 75 cm black 415 0518 2 3/0 75 cm black 420 0518 Round bodied tapercut point Metric USP Length Order number 3/8 Circle DRT 18 mm 1.5 4/0 75 cm black 415 0418 2 3/0 75 cm black 420 0418 Supramid Revision 4 Page 2

SILK Type Silk Braided Silk Virgin Braided multifilament Twisted multifilament Composition Coating Braided fibres from the cocoon of the silkworm Waxes Silicone Twisted fibres from the cocoon of the silkworm None Colour Black Blue Tissue reaction Absorption Presentation Moderate Silk suture elicits an initial inflammatory reaction in tissues, which is followed by gradual encapsulation of the suture by fibrous connective tissues. Box with 12 sutures For quality & safety Silk Revision 4

SILK CHARACTERISTICS High tensile strength, non absorbable Braided or twisted structure Coated multifilament Hermetically sealed packing BENEFITS Good and extended tissue support for up to 3 month Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues with minimal sawing, tissue drag and trauma Good knot tie down / adjustability Reduced capillary action Guaranteed seal and product sterility INDICATIONS especially in General soft tissue closing and/or ligation General surgery Skin closure Ophthalmic surgery Oral surgery Gastrointestinal surgery Gynaecology Obstetrics CONTRAINDICATIONS Urinary tract Biliary tract Known allergies or sensitivities to silk

Without needle Metric USP Length Order number 2 3/0 150 cm black 820 0015 3 2/0 150 cm black 830 0015 3.5 0 150 cm black 835 0015 4 1 150 cm black 840 0015 5 2 150 cm black 850 0015 6 3&4 150 cm black 860 0015 2 3/0 6 x 45 cm black 820 0044 3 2/0 6 x 45 cm black 830 0044 3.5 0 6 x 45 cm black 835 0044 4 1 6 x 45 cm black 840 0044 5 2 6 x 45 cm black 850 0044 1.5 4/0 17 x 45 cm black 815 0046 2 3/0 17 x 45 cm black 820 0046 3 2/0 17 x 45 cm black 830 0046 3.5 0 17 x 45 cm black 835 0046 4 1 17 x 45 cm black 840 0046 5 2 17 x 45 cm black 850 0046 1.5 4/0 13 x 60 cm black 815 0060 2 3/0 13 x 60 cm black 820 0060 3 2/0 13 x 60 cm black 830 0060 3.5 0 13 x 60 cm black 835 0060 4 1 13 x 60 cm black 840 0060 2 3/0 12 x 75 cm black 820 0075 3 2/0 12 x 75 cm black 830 0075 3.5 0 12 x 75 cm black 835 0075 4 1 12 x 75 cm black 840 0075 5 2 12 x 75 cm black 850 0075 Without needle Metric USP Length Order number Ligapack 2 3/0 250 cm black 820 0025 3 2/0 250 cm black 830 0025 3.5 0 250 cm black 835 0025 4 1 250 cm black 840 0025 5 2 250 cm black 850 0025 6 3&4 250 cm black 860 0025 Silk Revision 4 Page 1

Round bodied taper point Metric USP Length Order number HR 12 mm HR 16 mm HR 20 mm HR 26 mm HR 30 mm HR 37 mm 0.7 6/0 45 cm black 807 0112 1 5/0 45 cm black 810 0112 0.7 6/0 45 cm black 807 0116 1 5/0 75 cm black 810 0116 1.5 4/0 75 cm black 815 0116 2 3/0 75 cm black 820 0116 1 5/0 75 cm black 810 0120 1.5 4/0 75 cm black 815 0120 2 3/0 75 cm black 820 0120 3 2/0 75 cm black 830 0120 3.5 0 75 cm black 835 0120 1 5/0 75 cm black 810 0126 1.5 4/0 75 cm black 815 0126 2 3/0 75 cm black 820 0126 3 2/0 75 cm black 830 0126 3.5 0 75 cm black 835 0126 4 1 75 cm black 840 0126 2 3/0 75 cm black 820 0130 3 2/0 75 cm black 830 0130 3.5 0 75 cm black 835 0130 4 1 75 cm black 840 0130 5 2 75 cm black 850 0130 2 3/0 75 cm black 820 0137 3 2/0 75 cm black 830 0137 3.5 0 75 cm black 835 0137 4 1 75 cm black 840 0137 5 2 75 cm black 850 0137 HR 40 mm 5 2 75 cm black 850 0140 HR 45 mm 4 1 75 cm black 840 0145 5 2 75 cm black 850 0145 Silk Revision 4 Page 2

Round bodied taper point Metric USP Length Order number 3/8 Circle DR 16 mm DR 25 mm 1.5 4/0 75 cm black 815 0216 2 3/0 75 cm black 820 0216 2 3/0 75 cm black 820 0225 3 2/0 75 cm black 830 0225 3.5 0 75 cm black 835 0225 4 1 75 cm black 840 0225 DR 30 mm 3 2/0 75 cm black 830 0230 Round bodied taper point Metric USP Length Order number Straight GR 40 mm 3 2/0 75 cm black 830 2040 Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm DS 12 mm Easy Pass 0.5 7/0 45 cm black 805 1512 0.7 6/0 45 cm black 807 1512 1 5/0 45 cm black 810 1512 1.5 4/0 75 cm black 815 1512 2 3/0 75 cm black 820 1512 0.7 6/0 50 cm black 807 1512P DS 14 mm 0.7 6/0 45 cm black 807 1514 DS 16 mm DS 16 mm Easy Pass 0.7 6/0 75 cm black 807 1516 1 5/0 75 cm black 810 1516 1.5 4/0 75 cm black 815 1516 2 3/0 75 cm black 820 1516 3 2/0 75 cm black 830 1516 1 5/0 50 cm black 810 1516P 1.5 4/0 50 cm black 815 1516P Silk Revision 4 Page 3

Reverse cutting Metric USP Length Order number 3/8 Circle DS 19 mm DS 19 mm Easy Pass DS 24 mm DS 26 mm DS 30 mm DS 37 mm DS 45 mm DS 60 mm 0.7 6/0 75 cm black 807 1519 1 5/0 75 cm black 810 1519 1.5 4/0 75 cm black 815 1519 2 3/0 75 cm black 820 1519 3 2/0 75 cm black 830 1519 3.5 0 75 cm black 835 1519 4 1 75 cm black 840 1519 1.5 4/0 50 cm black 815 1519P 2 3/0 50 cm black 820 1519P 1 5/0 75 cm black 810 1524 1.5 4/0 75 cm black 815 1524 2 3/0 75 cm black 820 1524 3 2/0 75 cm black 830 1524 3.5 0 75 cm black 835 1524 4 1 75 cm black 840 1524 2 3/0 75 cm black 820 1526 3 2/0 75 cm black 830 1526 1 5/0 75 cm black 810 1530 1.5 4/0 75 cm black 815 1530 2 3/0 75 cm black 820 1530 3 2/0 75 cm black 830 1530 3.5 0 75 cm black 835 1530 4 1 75 cm black 840 1530 5 2 75 cm black 850 1530 2 3/0 75 cm black 820 1537 3 2/0 75 cm black 830 1537 3.5 0 75 cm black 835 1537 4 1 75 cm black 840 1537 5 2 75 cm black 850 1537 6 3&4 75 cm black 860 1537 3 2/0 75 cm black 830 1545 3.5 0 75 cm black 835 1545 4 1 75 cm black 840 1545 5 2 75 cm black 850 1545 3 2/0 75 cm black 830 1560 4 1 75 cm black 840 1560 Silk Revision 4 Page 4

Reverse cutting Metric USP Length Order number 3/8 Circle DS 90 mm 3.5 0 100 cm black 835 1590 Reverse cutting Metric USP Length Order number HS 17 mm HS 20 mm HS 22 mm HS 26 mm HS 36 mm 1 5/0 75 cm black 810 1417 1.5 4/0 75 cm black 815 1417 2 3/0 75 cm black 820 1417 1.5 4/0 75 cm black 815 1420 2 3/0 75 cm black 820 1420 1 5/0 75 cm black 810 1422 1.5 4/0 75 cm black 815 1422 2 3/0 75 cm black 820 1422 3 2/0 75 cm black 830 1422 1 5/0 75 cm black 810 1426 1.5 4/0 75 cm black 815 1426 2 3/0 75 cm black 820 1426 3 2/0 75 cm black 830 1426 3.5 0 75 cm black 835 1426 3.5 0 75 cm black 835 1436 4 1 75 cm black 840 1436 Cutting Metric USP Length Order number GS 40 mm 3 2/0 75 cm black 830 2140 Straight GS 60 mm 2 3/0 75 cm black 820 2160 3 2/0 75 cm black 830 2160 3.5 0 75 cm black 835 2160 4 1 75 cm black 840 2160 5 2 75 cm black 850 2160 Silk Revision 4 Page 5

Round bodied tapercut point Metric USP Length Order number HRT 18 mm 1.5 4/0 75 cm black 815 0518 2 3/0 75 cm black 820 0518 HRT 27 mm 2 3/0 75 cm black 820 0527 Round bodied tapercut point Metric USP Length Order number 3/8 Circle DRT 18 mm 1.5 4/0 75 cm black 815 0418 2 3/0 75 cm black 820 0418 Silk Revision 4 Page 6

Type Composition Coating Colour Tissue reaction Absorption Presentation Braided multifilament Polyester - a polymer of polyethylene terephthalate Silicone Teflon Green White Minimal Non absorbable, gradually encapsulated by connective tissue Box with 12 sutures For quality & safety Polyester Revision 4

CHARACTERISTICS Unsurpassed tensile strength, non absorbable Resistance to repeated bending Synthetic Braided structure Coated multifilament Hermetically sealed packing BENEFITS Excellent and permanent tissue support Use in cardiovascular surgery (heart prosthesis) Minimal tissue reaction Excellent handling properties High flexibility High tensile strength Excellent knot security Soft passage through the tissues with minimal sawing, tissue drag and trauma Good knot tie down / adjustability Reduced capillary action Guaranteed seal and product sterility INDICATIONS especially in General soft tissue closing and/or ligation Cardiovascular surgery Ophthalmic surgery General surgery Skin closure Orthopaedics Gastrointestinal surgery Obstetrics

Without needle Metric USP Length Order number 1.5 4/0 150 cm green 715 0015 2 3/0 150 cm green 720 0015 3 2/0 150 cm green 730 0015 3.5 0 150 cm green 735 0015 4 1 150 cm green 740 0015 5 2 150 cm green 750 0015 6 3&4 150 cm green 760 0015 1.5 4/0 6 x 45 cm green 715 0045 2 3/0 6 x 45 cm green 720 0045 3 2/0 6 x 45 cm green 730 0045 3.5 0 6 x 45 cm green 735 0045 4 1 6 x 45 cm green 740 0045 5 2 6 x 45 cm green 750 0045 6 3&4 6 x 45 cm green 760 0045 2 3/0 3 x 50 cm green 720 0050 3 2/0 3 x 50 cm green 730 0050 3.5 0 3 x 50 cm green 735 0050 4 1 3 x 50 cm green 740 0050 5 2 3 x 50 cm green 750 0050 2 3/0 2 x 75 cm green 720 0075-2 Without needle Metric USP Length Order number Ligapack 1.5 4/0 250 cm green 715 0025 2 3/0 250 cm green 720 0025 3 2/0 250 cm green 730 0025 3.5 0 250 cm green 735 0025 4 1 250 cm green 740 0025 5 2 250 cm green 750 0025 6 3&4 250 cm green 760 0025 Polyester Revision 4 Page 1

Round bodied taper point Metric USP Length Order number HR 16 mm HR 20 mm HR 26 mm HR 30 mm HR 36 mm HR 40 mm HR 48 mm 1 5/0 75 cm green 710 0116 1.5 4/0 75 cm green 715 0116 2 3/0 75 cm green 720 0116 1.5 4/0 75 cm green 715 0120 2 3/0 75 cm green 720 0120 2 3/0 75 cm green 720 0126 3 2/0 75 cm green 730 0126 3.5 0 75 cm green 735 0126 3 2/0 75 cm green 730 0130 3.5 0 75 cm green 735 0130 3 2/0 75 cm green 730 0136 3.5 0 75 cm green 735 0136 4 1 75 cm green 740 0136 4 1 75 cm green 740 0140 5 2 75 cm green 750 0140 4 1 75 cm green 740 0148 5 2 75 cm green 750 0148 Round bodied taper point double armed Metric USP Length Order number HR 16 mm HR 36 mm 2 3/0 60 cm green 720 0116-36 Round bodied taper point Metric USP Length Order number Straight GR 19 mm 1.5 4/0 45 cm green 715 2019 2 3/0 50 cm green 720 2019 Polyester Revision 4 Page 2

Round bodied taper point double armed Metric USP Length Order number Straight HR 26 mm GR 19 mm 2 3/0 75 cm green 720 0126-2019 Round bodied tapercut point Metric USP Length Order number HRT 18 mm 1.5 4/0 75 cm green 715 0518 2 3/0 75 cm green 720 0518 Round bodied tapercut point double armed 2 x HRT 17 mm 2 x HRT 25 mm Metric USP Length Order number 1.5 4/0 90 cm green 715 0517-2 2 3/0 90 cm green 720 0517-2 3 2/0 90 cm green 730 0517-2 with pledget - 4x green, 4x white 730 0517-2P 2 3/0 90 cm green 720 0525-2 3 2/0 90 cm green 730 0525-2 with pledget - 4x green, 4x white 730 0525-2P 2 x HRT 35 mm 3 2/0 90 cm green 730 0535-2 Reverse cutting Metric USP Length Order number 3/8 Circle DS 12 mm 1 5/0 45 cm green 710 1512 DS 16 mm 1 5/0 75 cm green 710 1516 1.5 4/0 75 cm green 715 1516 2 3/0 75 cm green 720 1516 Polyester Revision 4 Page 3

Reverse cutting Metric USP Length Order number DS 19 mm DS 24 mm 1 5/0 75 cm green 710 1519 1.5 4/0 75 cm green 715 1519 2 3/0 75 cm green 720 1519 3 2/0 75 cm green 730 1519 2 3/0 75 cm green 720 1524 3 2/0 75 cm green 730 1524 3.5 0 75 cm green 735 1524 3/8 Circle DS 26 mm 3 2/0 75 cm green 730 1526 2 3/0 75 cm green 720 1530 DS 30 mm 3 2/0 75 cm green 730 1530 3.5 0 75 cm green 735 1530 4 1 75 cm green 740 1530 DS 36 mm 3 2/0 75 cm green 730 1536 DS 40 mm 4 1 75 cm green 740 1540 5 2 75 cm green 750 1540 Reverse cutting Metric USP Length Order number 1.5 4/0 75 cm green 715 1417 HS 17 mm 2 3/0 75 cm green 720 1417 HS 22 mm 2 3/0 75 cm green 720 1422 HS 48 mm 6 3&4 75 cm green 760 1448 Cutting Metric USP Length Order number Straight GS 60 mm 2 3/0 75 cm green 720 2160 3 2/0 75 cm green 730 2160 Polyester Revision 4 Page 4

Type Composition Coating Colour Tissue reaction Absorption Presentation Monofilament Iron, nickel and chromium alloy None Metal Minimal Non absorbable Box with 12 sutures For quality & safety Steel Monofilament Revision 4

CHARACTERISTICS High tensile strength, non absorbable Synthetic Ductile and malleable Monofilament with microscopic uniform diameter Hermetically sealed packing BENEFITS Excellent and permanent tissue support Minimal tissue reaction Good handling properties Soft passage through the tissues without sawing, tissue drag and trauma Absence of capillarity (no support of bacterial growth) Excellent knot tie down Guaranteed seal and product sterility INDICATIONS Closure of sternum Orthopaedics Abdominal wall closure and hernia repair CONTRAINDICATIONS Known sensitivities or allergies to stainless or metals such as chromium and nickel

Round bodied tapercut point Metric USP Length Order number HRT 40 mm 6 3&4 4 x 45 cm ST 45 HRT 48 mm 7 5 4 x 45 cm ST 55 8 6 4 x 45 cm ST 65 Reverse cutting Metric USP Length Order number HS 25 mm 3.5 0 4 x 45 cm ST 01 HS 40 mm 4 1 4 x 45 cm ST 11 5 2 4 x 45 cm ST 21 HS 48 mm 6 3&4 4 x 45 cm ST 41 HS 50 mm 7 5 4 x 45 cm ST 51 8 6 4 x 45 cm ST 61 HS 58 mm 7 5 4 x 45 cm ST 52 8 6 4 x 45 cm ST 62 Cutting Metric USP Length Order number NHS 48 mm 7 5 4 x 45 cm ST 56 8 6 4 x 45 cm ST 63 9 7 4 x 45 cm ST 72 Steel Revision 4 Page 1

MICROSURGERY For quality & safety MICRO- SURGERY Microsurgery Revision 4

MICROSURGERY Micro needle taper point Metric USP Length Order number 3/8 Circle MDR 3,3 mm 50µm MDR 3,8 mm 50µm MDR 5,1 mm 70µm MDR 3,8 mm 70µm MDR 3,8 mm 100µm MDR 5,1 mm 100µm MDR 6,4 mm 140µm MDR 9,7 mm 200µm 0.1 11/0 10 cm black MN 111 0.2 10/0 10 cm black MN 102 0.01 12/0 10 cm black MN 124 0.1 11/0 10 cm black MN 114 0.2 10/0 10 cm black MN 104 0.1 11/0 10 cm black MN 113 0.2 10/0 15 cm black MN 105 0.2 10/0 15 cm black MN 106 0.3 9/0 15 cm black MN 096 0.4 8/0 15 cm black MN 087 0.5 7/0 45 cm black MN 078 Microsurgery Revision 4 Page 1

MICROSURGERY Micro needle taper point Metric USP Length Order number 3/8 Circle MDR 5,1 mm 100µm MDR 6,4 mm 150µm 0.2 10/0 15 cm blue MP 106 0.3 9/0 15 cm blue MP 097 Microsurgery Revision 4 Page 2

MICROSURGERY Micro needle taper point Metric USP Length Order number 3/8 Circle MDR 6,4 mm 150µm 0.4 8/0 20 cm violet M910 087 Microsurgery Revision 4 Page 3

OPHTHALMIC SURGERY For quality & safety OPHTHALMIC SURGERY Ophthalmic Revision 4

OPHTHALMIC SURGERY Side cutting spatula double armed Metric USP Length Order number 2 x HSP 8 mm 200 µm 0.5 7/0 45 cm violet OSU 07 Side cutting spatula double armed 3/8 Circle 2 x DSP 6 mm 200 µm 2 x DSP 8 mm 200 µm Metric USP Length Order number 0.4 8/0 45 cm violet OSU 08 0.5 7/0 45 cm violet OSU 071 Side cutting spatula double armed Metric USP Length Order number 1/4 Circle 2 x VSP 8 mm 300 µm 350 µm 0.7 6/0 45 cm violet OSU 06 1 5/0 45 cm violet OSU 05 Ophthalmic surgery Revision 4 Page 1

OPHTHALMIC SURGERY Side cutting spatula double armed Metric USP Length Order number 2 x HSP 8 mm 200 µm 300 µm 0.5 7/0 45 cm violet O910 07 0.7 6/0 45 cm violet O910 061 Side cutting spatula double armed Metric USP Length Order number 3/8 Circle 2 x DSP 6 mm 200 µm 220 µm 0.4 8/0 45 cm violet O910 08 0.5 7/0 45 cm violet O910 072 Side cutting spatula double armed 1/4 Circle 2 x VSP 8 mm 300 µm 2 x VSP 8 mm 350 µm Metric USP Length Order number 0.7 6/0 45 cm violet O910 06 0.7 6/0 45 cm undyed O910 06U 1 5/0 45 cm violet O910 05 Ophthalmic surgery Revision 4 Page 2

OPHTHALMIC SURGERY Side cutting spatula double armed Metric USP Length Order number 3/8 Circle 2 x DSP 6,5 mm 200 µm 0.4 8/0 45 cm blue OS 81 OPHTHALMIC SURGERY Side cutting spatula double armed 2 x DSP 6,5 mm 200 µm 3/8 Circle 2 x DSP 6,5 mm 240 µm 2 x DSP 6,5 mm 250 µm Metric USP Length Order number 0.4 8/0 45 cm black OS 81B 0.5 7/0 45 cm black OS 71 0.7 6/0 45 cm black OS 61 1 5/0 30 cm black OS 52 Side cutting spatula double armed 1/4 Circle 2 x VSP 8 mm 250 µm 2 x VSP 10 mm 350 µm Metric USP Length Order number 0.7 6/0 45 cm black OS 62 1 5/0 45 cm black OS 51 Ophthalmic surgery Revision 4 Page 3

OPHTHALMIC SURGERY Round bodied taper point double armed Metric USP Length Order number 1/4 Circle 2 x VR 8 mm 220 µm 0.4 8/0 45 cm black ON 81 Side cutting spatula double armed 2 x HSP 6,2 mm 150 µm 2 x HSP 6,4 mm 220 µm Metric USP Length Order number 0.2 10/0 30 cm black ON 102 0.2 10/0 30 cm black ON 106 Side cutting spatula double armed 2 x DSP 6 mm 220 µm 3/8 Circle 2 x DSP 6,2 mm 150 µm 2 x DSP 6,4 mm 220 µm Metric USP Length Order number 0.2 10/0 30 cm black ON 103 0.1 11/0 20 cm black ON 111 0.2 10/0 30 cm black ON 101 0.3 9/0 30 cm black ON 95 0.3 9/0 45 cm black ON 95-45 0.4 8/0 30 cm black ON 85 0.5 7/0 30 cm black ON 75 0.2 10/0 30 cm black ON 105 0.2 10/0 45 cm black ON 105-45 Side cutting spatula double armed Metric USP Length Order number 1/4 Circle 2 x VSP 8 mm 220 µm 1 5/0 45 cm black ON 51 Ophthalmic surgery Revision 4 Page 4

OPHTHALMIC SURGERY Side cutting spatula double armed 1/4 Circle 2 x VSP 8 mm 350 µm 2 x VSP 8 mm 300 µm 2 x VSP 8 mm 250 µm Metric USP Length Order number 0.5 7/0 45 cm white OP 71 0.7 6/0 45 cm white OP 61 1 5/0 45 cm white OP 51 Ophthalmic surgery Revision 4 Page 5

OPHTHALMIC SURGERY Side cutting spatula double armed Metric USP Length Order number Straight 2 x GSP 16,15 mm 150 µm 0.2 10/0 20 cm blue OPP 101 Ophthalmic surgery Revision 4 Page 6

SPECIALITY PRODUCTS For quality & safety Speciality Products Revision 4 SPECIALITY PRODUCTS

SPECIALITY PRODUCTS Skin Stapler & Remover INDICATIONS: SMI Skin Stapler can be used for a variety of skin closures. BENEFITS: Ergonomic and user friendly design Clear view of operating site Easy to check remaining staples Skin Stapler with 35 Wide Staples ZS35W Single use staple remover ZSR Staple size 6,4 mm 4,0 mm Polypropylene mesh INDICATIONS: Reinforcement of the abdominal wall Hernia Eventration via celioscopy or laparotomy COMPOSITION: Monofilament polypropylene knitted into an elastic, durable mesh Square & Rectangular Mesh BENEFITS: Extreme dimensional stability Very thin mesh structure Ideal porosity Excellent transparency Good handling Easy to cut Well tolerated Plug Mesh Plug flat Plug shaped Onlay 15 x 15 cm ZM 001 30 x 30 cm ZM 002 6 x 11 cm ZM 003 10 x 15 cm ZM 004 7.5 x 15 cm ZM 005 7 cm Ø - onlay 5 X 10 cm ZMP7 9 cm Ø - onlay 5 X 10 cm ZMP9 11 cm Ø - onlay 5 X 10 cm ZMP 11 Speciality products Revision 4 Page 1

SPECIALITY PRODUCTS Skin Marker For general purpose skin marking. Indelible gentian violet ink. Biocompatible, non toxic and non-irritating. With ruler in centimetres and inches. ZSM 20 ZSM 10 Dual tip, regular and fine tip skin marker with ruler, sterile Dual tip, regular and fine tip skin marker with ruler, non sterile Bone Wax 12 x 2.5 g Z046 COMPOSITION: Refined white beeswax 80%, isopropyl palmitate 20% INDICATIONS: Used in the control of bleeding from bone surfaces by acting as a mechanical barrier. PRESENTATION: 2.5 g slabs individually wrapped 12 in one box, sterile SMI Spon Absorbable Haemostatic Gelatin Sponge 3. COMPOSITION: Highly purified first grade gelatine material INDICATIONS: For use in various surgical procedures. Intended for haemostatic use by applying to a bleeding surface. Non pyrogenic and biocompatible. 2. 4. 1. 1. STANDARD 80 x 50 x 10 mm ZHG805010 2. SPECIAL 80 x 50 x 1 mm ZHG805001 3. TAMPON 80 x 30 mm DIA ZHG8030 4. DENTAL CUBE 10 x 10 x 10 mm ZHG101010 Speciality products Revision 4 Page 2

SPECIALITY PRODUCTS Surgical blades & scalpel handles For blade handle N 3 Surgical blades without handle Surgical blades with plastic handle N 10 N 11 N 12 N 12d N 15 N 15c ZB10 ZB11 ZB12 ZB12d ZB15 ZB15c ZBD10 ZBD11 ZBD12 ZBD15 For blade handle N 4 Surgical blades without handle Surgical blades with plastic handle N 18 N 20 N 21 N 22 N 23 N 24 N 25 ZB18 ZB20 ZB21 ZB22 ZB23 ZB24 ZB25 ZBD20 ZBD21 ZBD22 ZBD23 ZBD24 COMPOSITION: Carbon Steel PRESENTATION: Individual sterile foil packs without handle 100 / box with plastic handle 10 / box Scalpel handles COMPOSITION: Stainless Steel PRESENTATION: 10/ box N 3 ZBH3 N 4 ZBH4 Speciality products Revision 4 Page 3

SPECIALITY PRODUCTS Stitch Cutter ZBS Pilomat Tablet Crusher Z045 Tablet Splitter Z044 To crush tablets with a simple flick of the wrist. To cut tablets of any size in two. Cervix set Shirodkar cervix suture set 2 x blunt needle 4 mm polyester tape 40 cm 2 x HRB 50 mm ZCE1 4 mm polyester tape 50 cm 2 x HRB 50 mm ZCE4 4 mm polyester tape 50 cm 2 x HRB 65 mm ZCE3 Surgical suture rack Rack & drawer for rack The flexible racking system keeps your sutures organized and easily accessible during surgery. The interchangeable pieces allow for assembly into multiple configurations. 1 rack for 2 horizontal suture boxes (125 mm x 72 mm x 143 mm) Z070 Drawer for rack Z071 Speciality products Revision 4 Page 4

SPECIALITY PRODUCTS Needles 12 in one box Ordinary Eye GN Spring Eye GF Ordinary Eye GRN Spring Eye GRF 90 mm N 00 Z 751 Z 850 80 mm N 1 Z 702 Z 752 Z 851 70 mm N 2 Z 703 Z 753 Z 853 65 mm N 3 Z 704 60 mm N 4 Z 755 Z 855 55 mm N 6 Z 706 Z 756 Z 806 Z 856 50 mm N 7 Z 758 Z 807 Z 858 48 mm Z 840 45 mm N 8 Z 708 Z 759 Z 808 Z 859 40 mm N 9 Z 710 Z 760 Z 810 Z 860 35 mm N 10 Z 711 Z 761 Z 811 Z 861 30 mm N 12 Z 712 Z 762 Z 812 Z 862 25 mm N 13 Z 713 Z 763 Z 813 Z 863 20 mm N 15 Z 714 Z 764 Z 814 Z 864 16 mm N 16 Z 766 Z 866 SKI NEEDLES half curved Ordinary Eye Spring Eye 80 mm N 1 Z 202 70 mm N 2 Z 203 65 mm N 3 Z 204 60 mm N 4 Z 205 57 mm N 5 Z 201 55 mm N 6 Z 206 50 mm N 7 Z 207 45 mm N 8 Z 208 40 mm N 9 Z 260 35 mm N 10 Z 261 30 mm N 12 Z 262 25 mm N 13 Z 263 20 mm N 15 Z 264 16 mm N 16 Z 266 12 mm N 20 Z 268 Speciality products Revision 4 Page 5

SPECIALITY PRODUCTS 3/8 Circle Ordinary Eye BN Spring Eye BF Ordinary Eye BRN Spring Eye BRF Ordinary Eye BRT 130 mm N 6-0 Z 495 Z 595 110 mm N 4-0 Z 599 100 mm N 000 Z 500 Z 550 Z 650 90 mm N 00 Z 501 Z 551 Z 601 Z 651 Z 301 90 mm LIGHT N 00 Z 502 Z 602 85 mm N 0 Z 590 80 mm N 1 Z 503 Z 552 Z 591 Z 303 70 mm N 2 Z 504 Z 553 Z 603 Z 653 65 mm N 3 Z 604 60 mm N 4 Z 505 Z 555 Z 655 57 mm N 5 Z 506 Z 605 55 mm N 6 Z 556 Z 656 50 mm N 7 Z 557 Z 607 Z 657 45 mm N 8 Z 508 Z 558 Z 608 Z 658 40 mm N 9 Z 510 Z 560 Z 610 Z 660 35 mm N 10 Z 511 Z 561 Z 611 Z 661 32 mm N 11 Z 570 Z 670 30 mm N 12 Z 512 Z 562 Z 612 Z 662 25 mm N 13 Z 513 Z 563 Z 613 Z 663 22 mm N 14 Z 571 Z 671 20 mm N 15 Z 514 Z 564 Z 614 Z 664 16 mm N 16 Z 516 Z 566 Z 666 14 mm N 17 Z 567 Z 667 12 mm N 20 Z 568 STRAIGHT Ordinary Eye GSN Spring Eye GSF 75 mm N 1 Z 904 60 mm N 4 Z 903 Z 913 45 mm N 8 Z 902 40 mm N 9 Z 912 35 mm N 10 Z 911 Speciality products Revision 4 Page 6