Nais > Switches> NV [A] Switches HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE Features Extra long-life spring mechanism More than 10 mechanical operations, 10 electrical High contact rating of 1 Amps with an operating force of only 200 g.0 oz Safety insulation guard types available Available in a wide operating force and capacity range UL/CSA/VDE/SEMKO approved TYPICAL APPLICATIONS 1. Home appliances 2. Vending machines. Amusement and communication equipment. Copiers. General industrial machines PRODUCT TYPES 1. Standard type Actuators Contact Operating force, max. arrangement 0gf 100gf 200gf 00gf Pin plunger SPDT AH100 AH100 AH10 AH10 Pin plunger SPST-NC AH200 AH200 AH20 AH20 Pin plunger SPST-NO AH00 AH00 AH0 AH0 Short hinge lever SPDT AH110 AH110 AH11 AH11 Short hinge lever SPST-NC AH210 AH210 AH21 AH21 Short hinge lever SPST-NO AH10 AH10 AH1 AH1 Hinge lever SPDT AH120 AH120 AH12 AH12 Hinge lever SPST-NC AH220 AH220 AH22 AH22 Hinge lever SPST-NO AH20 AH20 AH2 AH2 Long hinge lever SPDT AH10 AH10 AH1 AH1 Long hinge lever SPST-NC AH20 AH20 AH2 AH2 Long hinge lever SPST-NO AH0 AH0 AH AH Simulated roller lever SPDT AH10 AH10 AH1 AH1 Simulated roller lever SPST-NC AH20 AH20 AH2 AH2 Simulated roller lever SPST-NO AH0 AH0 AH AH Short roller lever SPDT AH10 AH10 AH1 AH1 Short roller lever SPST-NC AH20 AH20 AH2 AH2 Short roller lever SPST-NO AH0 AH0 AH AH
Roller lever SPDT AH10 AH10 AH1 AH1 Roller lever SPST-NC AH20 AH20 AH2 AH2 Roller lever SPST-NO AH0 AH0 AH AH 2. Heat resistant type (Standard) Operating Bottom COM Side COM Actuators force, max. terminal terminal Pin plunger 0gf AH10 AH0 Pin plunger 100gf AH10 AH0 Pin plunger 200gf AH10 AH0 Pin plunger 00gf AH10 AH0 Short hinge lever 0gf AH11 AH1 Short hinge lever 110gf AH11 AH1 Short hinge lever 220gf AH11 AH1 Short hinge lever 20gf AH11 AH1 Hinge lever 0gf AH12 AH2 Hinge lever 0gf AH12 AH2 Hinge lever 120gf AH12 AH2 Hinge lever 20gf AH12 AH2 Long hinge lever 1gf AH1 AH Long hinge lever 0gf AH1 AH Long hinge lever 0gf AH1 AH Long hinge lever 120gf AH1 AH Simulated roller lever 0gf AH1 AH Simulated roller lever 0gf AH1 AH Simulated roller lever 120gf AH1 AH1 Simulated roller lever 20gf AH1 AH Short roller lever 0gf AH1 AH Short roller lever 110gf AH1 AH Short roller lever 220gf AH1 AH Short roller lever 20gf AH1 AH Roller lever 0gf AH1 AH Roller lever 0gf AH1 AH Roller lever 120gf AH1 AH Roller lever 20gf AH1 AH Remarks: When ordering solder terminal, change the fifth from "" to "2". (ex.) AH10 -->AH120
As for more than 200gf types,.20 Quick-connect terminal is available. When ordering, change the fifth from "" to "8". (ex.) AH10 -->AH180 Please consult us for NC and NO types. As for International standard, please refer to the "Information".. Heat resistant type (Low-level circuit type) Operating Bottom COM Side COM Actuators force, max. terminal terminal Pin plunger 1gf AH1012 AH012 Pin plunger 2gf AH1022 AH022 Pin plunger 0gf AH102 AH02 Pin plunger 100gf AH102 AH02 Pin plunger 200gf AH102 AH02 Short hinge lever 0gf AH112 AH12 Short hinge lever 110gf AH112 AH12 Short hinge lever 220gf AH112 AH12 Hinge lever 0gf AH122 AH22 Hinge lever 0gf AH122 AH22 Hinge lever 120gf AH122 AH22 Long hinge lever 1gf AH12 AH2 Long hinge lever 0gf AH12 AH2 Long hinge lever 0gf AH12 AH2 Simulated roller lever 0gf AH12 AH2 Simulated roller lever 0gf AH12 AH2 Simulated roller lever 120gf AH12 AH2 Short roller lever 0gf AH12 AH2 Short roller lever 110gf AH12 AH2 Short roller lever 220gf AH12 AH2 Roller lever 0gf AH12 AH2 Roller lever 0gf AH12 AH2 Roller lever 120gf AH12 AH2 Leaf lever 10gf AH1812 AH812 Leaf lever 1gf AH1822 AH822 Remarks: Please consult us for NC and NO types. As for International standard, please refer to the "Information". SPECIFICATIONS 1. Contact rating Operating force by pin Contact Rating (resistive load) plunger (max.) Silver alloy 0gf A 20V AC, 0.A 12V DC
Silver alloy 100gf 10A 20V AC, 0.A 12V DC Silver alloy 200gf, 00gf 00gf 1A 20V AC, 0.A 12V DC Gold clad 1gf 1A 20V AC Gold clad 2 to 200gf A 20V AC Gold clad low level circuit type (resistive load) V DC ma 12V DC 2mA 2V DC 1mA 2. Characteristics Contact Silver alloy Gold clad 200, Operating force by pin 0gf 100gf 00, plunger (max.) 00gf 1gf 2gf 0gf 100gf 200gf Expected life (min.) Expected life (min.) Mechanical (at O.T. rated) Electrical (at O.T. min.) Insulation resistance (min.) Dielectric Between strength terminals Between terminals Dielectric and other strength exposed metal parts Dielectric strength Between terminals and ground Min. 10 (at 0 cpm) Min. 10 (at rated load, 20 cpm) Min. 100M ohm (at 00V DC) 1,000V AC for 1min. 1,00V AC for 1min. 1,00V AC for 1min. Contact resistance Max. 0m ohm (by voltage Max. 0 m ohm (by voltage drop at 1A to (Initial) drop at 1A to 8V DC) 8V DC) Vibration resistance (by pin plunger types) 10 to Hz at amplitude of 0.mm (Contact opening: max. 1msec.) Shock resistance (by 19m/s 2 29m/s 2 98m/s 2 19m/s 2 29m/s 2 {10G} pin plunger types) Min. {10G} {20G} {0G} {20G} {0G} Allowable operating speed 0.1 to 1,000mm/sec. Max. operating cycle rate 00/min. 00/min. 00/min. Ambient temperature 2 C to +80 C 1 F to +1 F (No freezing below 0 C) Ambient humidity Max. 8% R.H. Unit weight 8g.28oz. Operating characteristics Pin plunger
1 2 0.1N {1gf} 0.2N {2gf} 0.9N {0gf} 0.98N {100gf} 1.9N {200gf} 2.9N {00gf}.92N {00gf} 0.029N {gf} 0.09N {gf} 0.12N {12gf} 0.2N {2gf} 0.9N {0gf} 0.N {gf} 0.98N {100gf} 1..0 0.8.01 0.8.01 1..0 0.8.01 0.8.01 1..0 0..01 0.8.01 1..0 0..01 0.8.01 1..0 0..01 0.8.01 1..0 0..01 0.8.01 1..0 0..01 0.8.01 1.±0..9±.02 1.±0..9±.02 1.±0..9±.02 1.±0..9±.02 1.±0..9±.02 1.±0..9±.02 1.±0..9±.02 Short hinge lever 1.08N {110gf} 2.1N {220gf}.1N.12N 0.9N {0gf} 0.8N {80gf} 1.±0.8.02±.01 1.±0.8.02±.01 1.±0.8.02±.01 1.±0.8.02±.01 1.±0.8.02±.01 Hinge lever 1.18N {120gf} 1.N {180gf} 2.N 0.09N {gf} 0.9N {0gf} 1.±1.2.02±.0 1.±1.2.02±.0 1.±1.2.02±.0 1.±1.2.02±.0 1.±1.2.02±.0 Long hinge lever
0.1N {1gf} 0.88N {90gf} 1.18N {120gf} 0.02N {2.gf} 0.09N {gf} 0.1N {1gf} 0.9N {0gf}..29 2.2.08 2.2.08..29 2.2.08 2.2.08..29 2.2.08 2.2.08..29 2.2.08 2.2.08..29 2.2.08 2.2.08 1.±2..02±.102 1.±2..02±.102 1.±2..02±.102 1.±2..02±.102 1.±2..02±.102 Simulated roller lever 1.18N {120gf} 1.N {180gf} 2.N 0.09N {gf} 0.9N {0gf} 18.±1.2.28±.0 18.±1.2.28±.0 18.±1.2.28±.0 18.±1.2.28±.0 18.±1.2.28±.0 Short roller lever 1.08N {110gf} 2.1N {220gf}.1N.12N 0.9N {0gf} 0.8N {80gf} 20.±0.8.81±.01 20.±0.8.81±.01 20.±0.8.81±.01 20.±0.8.81±.01 20.±0.8.81±.01 Roller lever
1.18N {120gf} 1.N {180gf} 2.N 0.09N {gf} 0.9N {0gf} 20.±1.2.81±.0 20.±1.2.81±.0 20.±1.2.81±.0 20.±1.2.81±.0 20.±1.2.81±.0 Leaf lever 1 2 0.1N {1gf} 0.010N {1gf} 0.020N {2gf}..18 2.09 1.2.0..18 2.09 1.2.0 1.±1..10±.0 1.±1..10±.0 NOTES: 1. Use.0mm mounting screws to mount switches with less than a kg-cm torque. Use of screw washers or adhesive lock is recommended. Before mounting, check insulation distance between terminals as well as between terminals and ground. If enough distance is not secured, it is recommended to use insulation material in mounting. Set 0 to 100% overtravel in actual use. When the operation object is in the free position, force should not be applied directly to the actuator or to the pin plunger. Also force should be applied to the pin plunger from vertical direction to the switch. 2. When specifying NV switches, allow ±20% to the listed operating and release forces.. Hand soldering should be accomplished in less than seconds, preferably with a 0 watt iron. Avoid contacting the switch case with the soldering iron.. As for O.F. 1gf/2gf types need for light weight actuator such as a leaf lever.. Low-level circuit type is recommended for using under low-level current and voltage.. Avoid using NV switches in the following conditions: o In corrosive gases, such as hydrogen sulfide. o In flammable or explosive gases such as gasoline or thinner etc. o In a dusty environment. o In an ambient temperature under 2 C 1 F or over 80 C 1 F. o In an ambient humidity over 8% R.H.