QS QuickShip Eligible When ordered with ALL "QS" options HBEAM 3.5 HB3.5 LED Find additional images and information at alwusa.com/hb35
1. BASE MODEL HB3.5S QS 3.5 suspended, direct/indirect HB3.5W 1 QS 3.5 wall mounted, direct/indirect 1 Includes optional 1/4" stand-off bracket(s) for alternative mounting option in the field Page 2 of 8 Type: 2. RUN LENGTH/ SIZE QS Individual (1, 2, 3, 4, 5', 6, 7 or 8 ) QS Continuous row or Configuration 2 (enter total linear length, ex: 20 ) 2 A configuration is a custom shape (rectangle square, L, etc.) with mitered corners. Must choose quantity of mitered corners in Additional Options. All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required. 3. LAMPING PRIMARY/ DIRECT Pair lamping with CCT (where applicable), ex: MED/2700K NONE QS None. Select when specifying only Indirect Lamping or Accent Downlight LOW 4 QS Low-output, high-performance LED 569 delivered lm/ft, 7.0 W/lf, 81 lm/w MED 4 QS Medium-output, high performance LED 746 delivered lm/ft, 10.1 W/lf, 74 lm/w HI 4,5 QS High-output, high-performance LED 1035 delivered lm/ft, 14.5 W/lf, 71 lm/w TUNE 6,8 Tunable white LED, 2700K-5700K 586 delivered lumens, 8.1 W/lf, 72 lm/w DECOR 7 Decorative constant voltage LED, 257 delivered lm/ft, 5.9 W/lf, 44 lm/w 3000K 3500K 4000K RGB 8 Color-changing RGB LED, 5 W/lf RGBW 8 Color-changing RGB plus White (4000K CCT) LED, 5 W/lf 3 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory. 4 Performance calculations are derived from IES test results (extroploated for LOW and HI) of MED option at 3000K with an EXT/F lens 5 HI may be specifier for Direct or Indirect lamping, but CANNOT be used in both channels 6 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs. Cooler and warmer CCT settings will provide lower lumens, lower lm/w and higher W/lf. 7 Performance calculations are extrapolated estimates 8 DMX driver recommended; controller not included
4. DRIVER PRIMARY DIRECT Pair driver with dimming level (where applicable), ex: 0/10V/S Page 3 of 8 NONE QS None. Select when specifying only Indirect Lamping or Accent Downlight 0/10V/ QS 0-10V dimming QS S Standard dimming 9 QS 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% ECOSYS1 QS Lutron Hi-lume 1% EcoSystem, constant current or constant voltage ECOSYS5 Lutron 5-Series 5% EcoSystem, constant current 9 For LOW, MED and HI lamping, standard dimming is down to 5%. For DECOR lamping, standard dimming is down to 10%. 5. LENS PRIMARY/ DIRECT NONE QS None. Select when specifying only Indirect Lamping or Accent Downlight EXT/F QS Extra diffuse, flush EXT/R QS Extra diffuse, reveal EXT/ASY/LED QS Extra diffuse with asymmetric distribution, flush (LED lamping only) EXT/ASY/LED Reflector and LED board are angled providing asymmetric distribution on wall surface 6. LAMPING INDIRECT Pair lamping with CCT (where applicable), ex: MED/2700K NONE QS None. Select when specifying only Direct Lamping or Accent Downlight LOW 10 QS Low-output, high-performance LED 569 delivered lm/ft, 7.0 W/lf, 81 lm/w MED 10 QS Medium-output, high performance LED 746 delivered lm/ft, 10.1 W/lf, 74 lm/w HI 10,11 QS High-output, high-performance LED 1035 delivered lm/ft, 14.5 W/lf, 71 lm/w TUNE 12,14 Tunable white LED, 2700K-5700K 804 delivered lumens, 8.1 W/lf, 99 lm/w DECOR 13 Decorative constant voltage LED, 353 delivered lm/ft, 5.9 W/lf, 60 lm/w 3000K 3500K 4000K RGB 14 Color-changing RGB LED, 5 W/lf RGBW 14 Color-changing RGB plus White (4000K CCT) LED, 5 W/lf 10 Performance calculations are derived from IES test results (extroploated for LOW and HI) of MED option at 3000K with an EXT/F lens 11 HI may be specifier for Direct or Indirect lamping, but CANNOT be used in both channels 12 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs. Cooler and warmer CCT settings will provide lower lumens, lower lm/w and higher W/lf. 13 Performance calculations are extrapolated estimates 14 DMX driver recommended; controller not included
7. DRIVER INDIRECT Pair driver with dimming level (where applicable), ex: 0/10V/S Page 4 of 8 NONE QS None. Select when specifying only Direct Lamping or Accent Downlight 0/10V/ QS 0-10V dimming QS S Standard dimming 15 QS 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% ECOSYS1 QS Lutron Hi-lume 1% EcoSystem, constant current or constant voltage ECOSYS5 Lutron 5-Series 5% EcoSystem, constant current 15 For LOW, MED and HI lamping, standard dimming is down to 5%. For DECOR lamping, standard dimming is down to 10%. 8. LENS INDIRECT NONE QS None. Select when specifying only Direct Lamping or Accent Downlight WD QS Frosted (LEDs may be visible when dimmed) EXT/F QS Extra diffuse, flush EXT/R QS Extra diffuse, reveal 9. ACCENT DOWNLIGHT NONE QS None. Select when specifying only Linear Lamping [CODE] Complete Accent Downlight Worksheet on Page 7 to determine code 10. DRIVER ACCENT DOWNLIGHT Pair driver with dimming level (where applicable), ex: 0/10V/S NONE QS None. Select when specifying only Direct and/or Indirect Lamping OR MR16/LED 0/10V/ 0-10V dimming S Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0% ECOSYS1 Lutron Hi-lume 1% EcoSystem, constant current or constant voltage ECOSYS5 Lutron 5-Series 5% EcoSystem, constant current
11. ACCESSORY ACCENT DOWNLIGHT NONE None HEX Hexcell louver SNT Snoot HEXCELL LOUVER SNOOT Page 5 of 8 12. QUANTITY ACCENT DOWNLIGHT NONE QS None. Select when specifying only Direct and/or Indirect Lamping Enter total quantity downlights per run length For total quantity considerations, please note each downlight requires 7.25 of linear length in the housing 13. FINISH AL QS Standard, natural Ultimatte aluminum BK QS Black powdercoat BRS Brass metallic powdercoat SV Silver powdercoat WH QS White powdercoat WH/AM White antimicrobial powdercoat for healthcare environments RAL/ Specify RAL powdercoat code (ex: #RAL/3003) 14. VOLTAGE UNV QS Universal voltage 347 16 347 volt 16 Driver options may be limited with 347 voltage. Consult factory.
15. ADDITIONAL OPTIONS NONE QS None Page 6 of 8 COMBO Combination 4.5" canopies at feed locations with both power feed and suspension mounting hardware EMC/ 17 QS Emergency circuit (indicate total quantity, ex: EMC/4) EMB/ 17 QS Emergency battery pack (indicate total quantity, ex: EMB/4) ENLGHT/ 18,19,20 QS Enlighted 0-10V embedded smart sensor (occupancy, daylight, networking and more) OS/ 19,20 0-10V remoted occupancy sensor (indicate total quantity, ex: OS/4) PH/ 19,20 0-10V remoted photocell/daylight sensor (indicate total quantity, ex: PH/4) MC/ QS* Mitered corners (indicate total quantity, ex: MC/4 for a rectangle) SB Seismic bracing 17 Consult factory for available options 18 Enlighted Gateway and Energy Manager (by others) plus programming required. Learn more at enlightedinc.com. 19 Compatible with 0-10V driver only. Contact factory for alternative options. 20 Select quantity of 1 for every 8 ft. (ex:enlght3 for a 24' fixture run; OS4 for a 32' fixture run) *45 mitered cuts forming 90 corners only for QuickShip qualification LAMP PAIRING OPTIONS Direct Indirect NONE LOW MED HI NONE LOW MED HI Limitations exist due to heat. Please follow above guidelines when specifying.
DIMENSIONS Page 7 of 8 5" 6" 5" 5" 3 11 16" 3 11 16" 3 11 16" 3 11 16" 4" HB3.5S EXT/F HB3.5S EXT/R HB3.5W HB3.5W Show with included, optional 1/4" offset bracket ACCENT DOWNLIGHT WORKSHEET SPOTLIGHTS DL800 DL1000 DL1500 SPOT DELIVERED LUMENS (LM) WATTS (W) EFFICACY (LM/W) CRI BEAM SPREAD (DEGREES) SELECT ONE ONLY CCT SELECT ONE ONLY COMPLETE CODE Compile bold codes, separate each with a slash and enter on Page 5, Section 9. ex: DL1500/25/3500K DL800 800 167 XX 80 DL1000 1000 164 XX 80 DL1500 1500 155 XX 80 25 40 25 40 25 40 3000K 3500K 4000K 3000K 3500K 4000K 3000K 3500K 4000K AIMING ACCESS PERPENDICULAR 5 Downlights are centered in a 7.5" long, hinged panel that opens to provide access for lamp installation, replacement and/or maintenance. PARALLEL 25
HOUSING 100% recyclable, extruded architectural grade T6061 aluminum with.08" minimum wall thickness. ELECTRICAL LED drivers are Class 2. L80 >50,000 hours. 80+ CRI. Luminous flux +/- 5%. ETL listed for damp location. LINEAR LENS OPTIONS Page 8 of 8 Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. WD (indirect only) is lightly frosted with greater light output, but possible source visibility. Choose from flush or reveal (dropped). EMERGENCY Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for details. SUSPENSION HARDWARE FLUSH LENS EXT/F, WD REVEAL LENS EXT/R FINISH CEILING HARDWARE (1) 4.5" canopy per power feed location, (1) bullet mount, (1) 8' aircraft cable and (1) 2" canopy (for use with T-bar mounting) per suspension point OPTIONS COMBO CANOPY Choose option COMBO to specfiy 4.5" canopies at feed locations with power feed and aircraft cable suspension mounting Canopy finish is always white. Contact factory for alternate color. Standard finish is "Ultimatte" aluminum a smooth, clean and durable finish achieved from a deepetch and two-step clear anodizing process. White, black, silver, brass and color RAL powdercoat options also available. For healthcare environments, a white antimicrobial finish (WH/AM) is also an option. ALUMINUM AL WHITE WH & WH/AM BLACK BK Eye Bolt (By Others) Gripper w/hook 2-Cable Clamp SILVER SV BRASS BRS COLOR RAL Aircraft Cable SEISMIC BRACING Add-on hardward includes cable gripper with hook, 2-cable clamp and specified length of aircraft cable per suspension point MITERED CORNERS Consult factory for mitered corner angle options OPERATING TEMPERATURE Luminaire should be installed and operated ONLY in environments where the ambient temperature ranges from -4 F (-20 C) to 122 F (50 C). Operating the luminaire in environments outside the listed temperature range voids the warranty AND may damage the product or adversely impact lamp life, lumen output and color consistency.