SMD Power Inductor 4R7. Dimensions. A max. B max. Inductance and rated current ranges

Similar documents
Inductance and Current Ranges

LP-NSM(L) Series. Features. Product Dimensions. Small size of Fast tripping resettable circuit protection

LP-NSM(L) Series. Features. Product Dimensions. Small size of Fast tripping resettable circuit protection

Nais > Switches> NV [A7] Switches

ENGINEERING TEST SPECIFICATION

Tin Whisker Testing FAB

Pixie-7P. Battery Connector Pixie-7P Fuse* Motor. 2.2 Attaching the Motor Leads. 1.0 Features of the Pixie-7P: Pixie-7P Batt Motor

Portable Washing Machine GPW-5

Our Automatic pet feeder works for all sizes pets such as dogs, ferrets, pigs, deer etc.

A Statistical Study of Sn Whisker Population and Growth during Elevated Temperature and Humidity Storage Tests

Electromagnetic flowmeters. dg: NEW. Sensors MUT 2200 EL / MUT 2500 EL DS100-4-ENG 1/14

INTERNATIONAL STANDARD FOR FCI PIGEON FOOTRINGS

XL³ 400 class II insulated distribution cabinets and cable compartments

Pet Selective Automated Food Dispenser

VRTIKL. Appliance Dimension Diagram Without Stone Surround Dimensions are actual appliance dimensions. Use for reference only.

August Specials. Summer Suture Sale! In August, suture cassettes are 10% off. 10% off Splints Special includes: J0289P Sam Paw Splint

PetSpy Premium Dog Training Collar, Models M919-1/M919-2

MGL Avionics EFIS G2 and iefis. Guide to using the MGL RDAC CAN interface with the UL Power engines

R-2000+C/210F,/165F,/125L

Lioness Guidebook: Open Me to Get Started!

Specifications. Operating space R-2000+C/210F,/165F,/125L

Y Series 4, 5 & 6 Tumbler Switchlocks

PetSpy Advanced Dog Training System, Model M86N

High Voltage Ceramic Disc Capacitors (Low loss type)

How To... Why the correct whole-house brooding set-up is important?

Type Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread # of Contacts 1 to to 55 1 to 55 1 to 130

S Fault Indicators. S.T.A.R. Type CR Faulted Circuit Indicator Installation Instructions. Contents PRODUCT INFORMATION

TECHNICAL CHARACTERISTICS CT 014

FCI Molded Products Inc. VOL 1.0

Introduction. Analysis of Commercial Products

Single Port Modular Jacks

SERIE ANTI REPELLERS ANTI VELTEK SYSTEMS, SL.

Pet Selective Automated Food Dispenser

TPS204xB/TPS205xB Current-Limited, Power-Distribution Switches data sheet (SLVS514)

Selection Charts. standard ranges 85 C 105 C 021 ASM 030/031 AS ASH 023 ASR 025 AMR

Simrad ITI Trawl monitoring system

Product Name: Uricult Moderately Complex Item Number: Intuition: Title: Title: Discontinued By

Fiber-Optic Accessories

WALKING BOOT, PNEUMATIC AND/OR VACUUM, WITH OR WITHOUT JOINTS, WITH OR WITHOUT INTERFACE MATERIAL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT

EPIC Industrial connectors

KNEE BRACE CASTING INSTRUCTIONS

APPENDIX D GENERAL, RACING, AS WELL AS CLOCK RULES, AND RELEASE OF PIGEONS

PRODUCT FAMILY DATASHEET LED SUPERSTAR CLASSIC B DIM

Ultra Min No-Bark Training Collar Ultra Small Ultra Powerful Ultra Control

High Voltage Ceramic Disc Capacitors (Low loss type)

Meter Risers, Fittings & PE Pipe for Underground Gas Applications

Part Number: CAT6+ UTP PVC PATCH CORDS CAT6+ Patch Cord, UTP, PVC

High Voltage Ceramic Disc Capacitors (Low loss type)

A. Set-Up with gravel

ICAO WCO Joint Conference on Enhancing Air Cargo Security and Facilitation

POULTRY ABATTOIR (SLAUGHTER) FACILITIES

Part Number: CAT6+ UTP PVC PATCH CORDS CAT6+ Patch Cord, UTP, PVC

YELLOW VIBRATION BARK COLLAR

Breeder Package. Our Experience. Your Success.

Getting Started. Device Overviews. Setting Up the Pro 550 System Before you can use the Pro 550 system, you must set up the devices.

What to Look for in a Pet Cremation Service

PARATHOM advanced CLASSIC P

ONE CAMERA REEL. 200' COLOR REEL Cat. # ' SELF-LEVELING COLOR REEL Cat. # ' MINI COLOR REEL Cat. #14063

Breeder Package. Our Experience. Your Success. Count on Chore-Time for experience, reliability, performance and confidence.

SUPER TRAINER EZT SERIES

7300 SPT 7302 SPT 7800 SPT 7802 D.T. SYSTEMS, INC.

Express Train Electronic Radio Dog Training Collar

Catapult Project (Quadratic Functions)

EX3 Stepper-Motor Driven Electronic Expansion Valve Technical Data

FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS Rome, 1983

AmpFlex Flexible Current Probes

For more information:

BROILER PRODUCTION GUIDE

COOPER POWER SERIES. S.T.A.R. Type ER faulted circuit indicator installation instructions. Fault Indicators MN320006EN

Super Vu-Tron Supreme Types SJOOW/SOOW

Error! Reference source not found. I. SUMMARY OF PRODUCT CHARACTERISTICS

Electronic Pet Fencing System W-227

Microchipping Works: Best Practices

HAND BOOK OF POULTRY FARMING AND FEED FORMULATIONS

High Voltage Ceramic Disc Capacitors (Low loss type)

Standard Operating Procedures (SOP), Minimum Standards (MS) and. Evaluation Procedure. for implementing. a Pedigree Selection (PS) programme.

SMT FINGER PRODUCT. Many different shape of SMT metal parts :

BUYING GUIDE ALGOT. Storage across the home. DESIGN Francis Cayouette

2. Decide who may be harmed and how 3. Evaluate the risks 4. Record the finds 5. Review the assessment

The guests have all gone. That was a wonderful birthday party, and you got. Yes, but I unwrapped them so quickly, and now I don t think I know who

Milk Quality Evaluation Tools for Dairy Farmers

COVINA SUPER 49. Use and maintenance manual / User information manual for artificial incubation of eggs

Reconquer your property

NEWS. High Tech Aquarium Ecology. Bavaria. designed and made. English

Pressure Tanks. ASME Code Stainless Steel, Galvanized and ASME PT Series Tanks. A R 10/11

GARNET STATIC SHOCK BARK COLLAR

Electronic and visual identification for sheep and goats in Brazil

Offers Over 30,000 (Freehold) PLAYFUL PAWS DOG DAYCARE CENTRE, 18 CARSEGATE ROAD NORTH, INVERNESS, IV3 8EA

QPX ANTIACID CENTRIFUGAL FANS FEATURES & BENEFITS APPLICATION UPON REQUEST CONSTRUCTION ACCESSORIES

INNOBOX EDGE CUSTOM PRINT PROGRAM ITEMS. Leak Resistant. Gloss Surface (SBS Only) Cold Food Friendly. Custom Printing.

Application system. Size and weight reduction of the mechanical unit for a more lightweight and compact robot.

Naaz International.

Industrial Batteries Network Power Marathon M FT AGM Modular Power.

288 Seymour River Place North Vancouver, BC V7H 1W6

Instructions CHICKTEC VISION 40 INCUBATOR. CHICKTEC May 2009 Page 1

XL³ 800 IP 55metal distribution cabinets, freestanding enclosures and cable compartments

GARNET STATIC SHOCK BARK COLLAR

Care of the egg: from nest to farm store9

APPLICANT: LIFELINES TRADING LTD DATE: May 12, /F, MILO'S INDUSTRIAL BUILDING, 2-10 TAI YUEN STREET, KWAI CHUNG, N.T.

MARINE CRANES LIFETIME EXCELLENCE PALFINGER MARINE YOUR WORLDWIDE SPECIALIST FOR RELIABLE AND INNOVATIVE MARINE AND OFFSHORE CRANES

Transcription:

CD Series SMD Power Inductor 4R7 EPOXY D E J F I H Features -High power, High saturation inductors -Ideal inductors for DC-DC converters in notebook computer, PDAs, Step-up or step-down converters, flash memory programmers, etc. -CD1608 used ceramic base with goldplating -The others used CP plastic base Dimensions Type A max. B max. C max. Unit: mm D E F H I J CD1608 6.60 4.45 2.92 4.32 1.02 1.27 1.40 3.56 4.06 CD3308 12.95 9.40 3.00 7.62 2.54 2.54 2.79 2.92 7.37 CD3316 12.95 9.40 5.21 7.62 2.54 2.54 2.79 2.92 7.37 CD3340 12.95 9.40 11.43 7.62 2.54 2.54 2.79 2.92 7.37 CD5022 18.54 15.24 7.11 12.7 2.54 2.54 2.79 2.92 12.45 Applications -Portable Telephones -Personal Computers -DC/DC Converters, etc. -Other Various Electronic Appliances Characteristics -Saturation Rated Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25 C) -Operating temperature range: -40~125 C Inductance and rated current ranges -CD1608 1.0µH~1000µH 2.9~0.10A -CD3308 1.0µH~1000µH 5.15~0.10A -CD3316 0.68µH~1000µH 11~0.30A -CD3340 0.47µH~1000µH 20~0.8A -CD5022 1.0µH~1000µH 20~1.0A - equipment: : HP4284A CR meter : Milli-ohm meter -Electrical specifications at 25 C Product Identification CD 1608 M 101 T Product Type Dimensions (AxBxC) 1608: 6.60 4.45 2.92 3308: 12.95 9.40 3.00 3316: 12.95 9.40 5.21 3340: 12.95 9.40 11.43 5022: 18.54 15.24 7.11 Inductor Packaging Style Inductance M: ±20% 1R0: 1.0µH T: Tape and Reel 470: 47µH 101: 100µH Page 1 of 7

CD1608 Type 1R0 1.0 M 100KHz, 0.1V 0.05 2.90 1R5 1.5 M 100KHz, 0.1V 0.06 2.60 2R2 2.2 M 100KHz, 0.1V 0.07 2.30 3R3 3.3 M 100KHz, 0.1V 0.08 2.00 4R7 4.7 M 100KHz, 0.1V 0.09 1.50 6R8 6.8 M 100KHz, 0.1V 0.13 1.20 8R2 8.2 M 100KHz, 0.1V 0.16 1.15 100 10 M 100KHz, 0.1V 0.16 1.10 150 15 M 100KHz, 0.1V 0.23 0.90 220 22 M 100KHz, 0.1V 0.37 0.70 330 33 M 100KHz, 0.1V 0.51 0.58 470 47 M 100KHz, 0.1V 0.64 0.50 680 68 M 100KHz, 0.1V 0.86 0.40 101 100 M 100KHz, 0.1V 1.27 0.31 151 150 M 100KHz, 0.1V 2.00 0.27 221 220 M 100KHz, 0.1V 3.11 0.22 331 330 M 100KHz, 0.1V 3.80 0.18 471 470 M 100KHz, 0.1V 6.00 0.14 681 680 M 100KHz, 0.1V 10.5 0.12 102 1000 M 100KHz, 0.1V 13.8 0.10 CD3308 Type 1R0 1.0 M 100KHz, 0.1V 0.024 5.15 4R7 4.7 M 100KHz, 0.1V 0.036 4.20 6R8 6.8 M 100KHz, 0.1V 0.060 3.90 8R2 8.2 M 100KHz, 0.1V 0.080 2.42 100 10 M 100KHz, 0.1V 0.110 2.40 150 15 M 100KHz, 0.1V 0.120 2.30 220 22 M 100KHz, 0.1V 0.180 1.80 330 33 M 100KHz, 0.1V 0.250 1.60 470 47 M 100KHz, 0.1V 0.320 1.30 680 68 M 100KHz, 0.1V 0.540 1.10 101 100 M 100KHz, 0.1V 0.690 0.87 151 150 M 100KHz, 0.1V 0.940 0.74 221 220 M 100KHz, 0.1V 1.600 0.56 331 330 M 100KHz, 0.1V 2.150 0.50 471 470 M 100KHz, 0.1V 3.300 0.40 681 680 M 100KHz, 0.1V 4.400 0.33 821 820 M 100KHz, 0.1V 5.800 0.15 102 1000 M 100KHz, 0.1V 8.400 0.10 Page 2 of 7

CD3316 Type R68 0.68 M 100KHz, 0.1V 0.008 11.0 1R0 1.0 M 100KHz, 0.1V 0.009 9.00 1R2 1.2 M 100KHz, 0.1V 0.010 8.50 1R5 1.5 M 100KHz, 0.1V 0.010 8.00 1R8 1.8 M 100KHz, 0.1V 0.011 7.50 2R2 2.2 M 100KHz, 0.1V 0.012 7.00 2R7 2.7 M 100KHz, 0.1V 0.014 6.50 3R3 3.3 M 100KHz, 0.1V 0.015 6.40 4R7 4.7 M 100KHz, 0.1V 0.018 5.40 5R6 5.6 M 100KHz, 0.1V 0.025 4.70 6R8 6.8 M 100KHz, 0.1V 0.027 4.60 8R2 8.2 M 100KHz, 0.1V 0.036 4.00 100 10 M 100KHz, 0.1V 0.038 3.80 120 12 M 100KHz, 0.1V 0.044 3.20 150 15 M 100KHz, 0.1V 0.046 3.00 180 18 M 100KHz, 0.1V 0.066 2.70 220 22 M 100KHz, 0.1V 0.085 2.60 270 27 M 100KHz, 0.1V 0.095 2.10 330 33 M 100KHz, 0.1V 0.100 2.00 390 39 M 100KHz, 0.1V 0.130 1.70 470 47 M 100KHz, 0.1V 0.140 1.60 560 56 M 100KHz, 0.1V 0.190 1.50 680 68 M 100KHz, 0.1V 0.200 1.40 820 82 M 100KHz, 0.1V 0.260 1.25 101 100 M 100KHz, 0.1V 0.280 1.20 121 120 M 100KHz, 0.1V 0.360 1.02 151 150 M 100KHz, 0.1V 0.400 1.00 181 180 M 100KHz, 0.1V 0.540 0.82 221 220 M 100KHz, 0.1V 0.610 0.80 271 270 M 100KHz, 0.1V 0.840 0.62 331 330 M 100KHz, 0.1V 1.020 0.60 391 390 M 100KHz, 0.1V 1.250 0.52 471 470 M 100KHz, 0.1V 1.270 0.50 561 560 M 100KHz, 0.1V 1.850 0.42 681 680 M 100KHz, 0.1V 2.020 0.40 821 820 M 100KHz, 0.1V 2.530 0.35 102 1000 M 100KHz, 0.1V 3.000 0.30 Page 3 of 7

CD3340 Type R47 0.47 M 100KHz, 0.1V 0.008 20.0 R82 0.82 M 100KHz, 0.1V 0.009 20.0 1R2 1.2 M 100KHz, 0.1V 0.010 20.0 1R5 1.5 M 100KHz, 0.1V 0.010 20.0 2R2 2.2 M 100KHz, 0.1V 0.012 18.5 3R5 3.5 M 100KHz, 0.1V 0.015 18.0 4R7 4.7 M 100KHz, 0.1V 0.020 13.0 5R6 5.6 M 100KHz, 0.1V 0.022 12.0 6R8 6.8 M 100KHz, 0.1V 0.030 10.0 8R2 8.2 M 100KHz, 0.1V 0.033 9.00 100 10 M 100KHz, 0.1V 0.040 8.00 120 12 M 100KHz, 0.1V 0.042 7.20 150 15 M 100KHz, 0.1V 0.050 7.00 180 18 M 100KHz, 0.1V 0.052 5.70 220 22 M 100KHz, 0.1V 0.066 5.50 270 27 M 100KHz, 0.1V 0.072 4.20 330 33 M 100KHz, 0.1V 0.080 4.00 390 39 M 100KHz, 0.1V 0.092 3.90 470 47 M 100KHz, 0.1V 0.110 3.80 560 56 M 100KHz, 0.1V 0.150 3.20 680 68 M 100KHz, 0.1V 0.170 3.00 820 82 M 100KHz, 0.1V 0.200 2.60 101 100 M 100KHz, 0.1V 0.220 2.50 121 120 M 100KHz, 0.1V 0.320 2.20 151 150 M 100KHz, 0.1V 0.340 2.00 181 180 M 100KHz, 0.1V 0.420 1.80 221 220 M 100KHz, 0.1V 0.440 1.60 271 270 M 100KHz, 0.1V 0.600 1.30 331 330 M 100KHz, 0.1V 0.700 1.20 391 390 M 100KHz, 0.1V 0.850 1.10 471 470 M 100KHz, 0.1V 0.950 1.00 561 560 M 100KHz, 0.1V 1.100 1.00 681 680 M 100KHz, 0.1V 1.200 1.00 821 820 M 100KHz, 0.1V 1.500 0.82 102 1000 M 100KHz, 0.1V 2.000 0.80 Page 4 of 7

CD5022 Type 1R0 1.0 M 100KHz, 0.1V 0.009 20.00 2R2 2.2 M 100KHz, 0.1V 0.014 16.00 3R3 3.3 M 100KHz, 0.1V 0.018 14.00 4R7 4.7 M 100KHz, 0.1V 0.019 13.00 5R6 5.6 M 100KHz, 0.1V 0.020 12.00 6R8 6.8 M 100KHz, 0.1V 0.022 10.60 8R2 8.2 M 100KHz, 0.1V 0.024 10.30 100 10 M 100KHz, 0.1V 0.031 10.00 120 12 M 100KHz, 0.1V 0.034 8.20 150 15 M 100KHz, 0.1V 0.036 8.00 180 18 M 100KHz, 0.1V 0.045 7.20 220 22 M 100KHz, 0.1V 0.047 7.00 270 27 M 100KHz, 0.1V 0.056 5.80 330 33 M 100KHz, 0.1V 0.066 5.50 390 39 M 100KHz, 0.1V 0.080 4.60 470 47 M 100KHz, 0.1V 0.095 4.50 560 56 M 100KHz, 0.1V 0.128 3.70 680 68 M 100KHz, 0.1V 0.130 3.50 820 82 M 100KHz, 0.1V 0.180 3.10 101 100 M 100KHz, 0.1V 0.190 3.00 121 120 M 100KHz, 0.1V 0.240 2.80 151 150 M 100KHz, 0.1V 0.250 2.60 181 180 M 100KHz, 0.1V 0.360 2.50 221 220 M 100KHz, 0.1V 0.380 2.40 271 270 M 100KHz, 0.1V 0.520 2.00 331 330 M 100KHz, 0.1V 0.560 1.90 391 390 M 100KHz, 0.1V 0.720 1.50 471 470 M 100KHz, 0.1V 0.850 1.40 561 560 M 100KHz, 0.1V 1.080 1.30 681 680 M 100KHz, 0.1V 1.100 1.20 821 820 M 100KHz, 0.1V 1.600 1.03 102 1000 M 100KHz, 0.1V 1.800 1.00 Page 5 of 7

Tape and Reel specifications INDUCTORS Unit: mm Type Tape size Parts Per Reel W P 13 CD1608 16 8 2000 CD3308 24 12 1000 CD3316 24 12 1000 CD3340 24 16 225 CD5022 32 20 250 Page 6 of 7

SMT Power Inductor Environmental Specifications General Items Shelf Storage conditions Specifications Temperature range: 15~28 ; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery. Environmental test Items Specifications s / Methods High temperature Storage test ow temperature Storage test Humidity test Thermal shock test Mechanical test No case deformation or change in appearance. / 10% Temperature 85±2, Time: 96±2 hours, ed after 1hour at room temperature. Temperature -25±2, Time: 96±2 hours, ed after 1hour at room temperature. Temperature 40±2, 90~95% relative humidity Time: 96±2 hours, ed after 1hour at room temperature. First -25 30minutes then 25 10 minutes last 85 30 minutes, as 1 cycle. Go through 5 cycles. ed after 1 hour at room temperature. Items Specifications s / Methods Solderability test Resistance to Soldering Heat Vibration test Shock resistance Terminal area must have 90% minimum solder coverage. No case deformation or change in appearance. No case deformation or change in appearance. / 10% Product with ead-free terminal: Dip pads in flux then dip in solder pot at 245±5 for 3 seconds. Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130~150. Immersing to 260±5 for 10 seconds. Apply frequency 10~55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. Drop down with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. The condition of reflow (recommendation): Page 7 of 7