CONTROL ENGINE SWING SYSTEM SERVICE REFILL CAPACITIES HYDRAULIC SYSTEM UNDERCARRIAGE OPERATING WEIGHT (APPROXIMATE) DRIVES & BRAKES CONTROL MAIN PUMP

Transcription

1 SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S IN Perkins / 1204 Water-cooled, 4-cycle diesel, 4-cylinder in-line, irect injection, Turbocharged, harge and air cooled 1995 (gross) kw (137 HP) at 2,050 rpm 1349 (net) 96 kw (128 HP) at 2,050 rpm 6271/1 (gross) kw (139 PS) at 2,050 rpm 6271/1 (net) 96 kw (130 PS) at 2,050 rpm 57.1 kgf m (413 lbf ft) at 1,400 rpm Max. torque ore stroke mm ( ) Piston displacement 4,400 cc (268.5 cu in) atteries 2 12 V 100 h Starting motor 24 V kw lternator 24 V HYRUI SYSTM MIN PUMP Type Two variable displacement piston pumps Max. flow l/min (43.3 US gpm / 36.1 U gpm) Sub-pump for pilot circuit Gear pump ross-sensing and fuel saving pump system HYRUI MOTORS Two speed axial pistons motor with Travel brake valve and parking brake Swing xial piston motor with automatic brake RI VV STTING Implement circuits 350 kgf/cm 2 (4,980 psi) Travel 350 kgf/cm 2 (4,980 psi) Power boost (boom, arm, bucket) 380 kgf/cm 2 (5,400 psi) Swing circuit 285 kgf/cm 2 (4,054 psi) Pilot circuit 40 kgf/cm 2 (570 psi) Service valve Installed HYRUI YINRS No. of cylinder bore stroke oom: x 1,090 mm (4.5 x 42.9 ) rm: x 1,355 mm (4.7 x 53.3 ) ucket: x 995 mm (4.3 x 39.2 ) ozer lade: x 320 mm (4.3 x 12.6 ) 2-Piece 1st: x 960 mm (4.5 x 37.8 ) oom 2nd: x 650 mm (6.3 x 25.6 ) RIVS & RS rive method ully hydrostatic type rive motor Two speed axial pistons motor Reduction system Planetary reduction gear Max. drawbar pull 17,000 kgf (37,500 lbf) Max. travel speed (high / low) 5.3 km/hr (3.3 mph) / 3.2 km/hr (2.0 mph) Gradeability 35 (70%) Parking brake Multi wet disc ONTRO Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Two joysticks with one safety lever Pilot control (H): Swing and arm (RH): oom and bucket (ISO) ONTRO Traveling and steering ngine throttle ights SWING SYSTM Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed Two levers with pedals lectric, ial type Two lights mounted on the boom, Two on the upper frame xial piston motor Planetary gear reduction Grease-bathed Multi wet disc 10.3 rpm SRVI RI PITIS Re-filling liter US gal U gal uel tank ngine coolant ngine oil Swing device - gear oil inal drive (each) - gear oil Hydraulic system (including tank) Hydraulic tank /dlue tank UNRRRIG The X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing springs and sprockets and a track chain with double or triple grouser shoes. enter frame X - leg type Track frame Pentagonal box type No. of shoes on each side 51 No. of carrier roller on each side 2 No. of track roller on each side 7 No. of rail guard on each side 1 OPRTING WIGHT (PPROXIMT) Operating weight, including 5,100 mm (16 9 ) boom; mm arm; S heaped 0.76 m 3 (0.99 yd 3 ) bucket, lubricant, coolant, full fuel tank, full hydraulic tank and all standard equipments. OPRTING WIGHT Shoes Operating weight pressure Type Width mm (in) kg (lb) kgf/cm 2 (psi) HX180 18,540 (40,870) 0.51 (7.25) 500 (20 ) HX180 19,440 (42,860) 0.54 (7.68) HX180N 18,440 (40,650) 0.51 (7.25) HX180 18,800 (41,450) 0.43 (6.11) 600 (24 ) HX180 19,700 (43,430) 0.45 (6.40) Triple HX180N 18,700 (41,230) 0.43 (6.11) grouser HX180 19,050 (42,000) 0.38 (5.40) 700 (28 ) HX180 19,950 (43,980) 0.39 (5.55) HX180N 18,950 (41,780) 0.37 (5.26) HX180 19,310 (42,570) 0.33 (4.69) 800 (32 ) HX180 20,210 (44,560) 0.35 (4.98) HX180N 19,210 (42,350) 0.33 (4.69) 1

2 UT STION GUI & IGGING OR UTS S heaped 0.39 (0.51) 0.50 (0.65) 0.64 (0.84) 0.89 (1.16) 0.69 (0.90) 0.75 (0.98) m 3 (yd 3 ) 0.70 (0.92) 1.05 (1.37) 0.76 (0.99) S heaped m 3 (yd 3 ) heaped Without side cutters Width mm (in) With side cutters Weight kg (lb) rm 5,100 (16 9 ) Mono-oom rm Recommendation mm (ft.in) 3,100 (10 2 ) rm rm 5,100 (16 9 ) 2-Piece boom 0.39 (0.51) 0.34 (0.44) 620 (24.4) 740 (29.1) 410 (900) 0.50 (0.65) 0.44 (0.58) 760 (29.9) 880 (34.6) 470 (1,040) 0.64 (0.84) 0.55 (0.72) 920 (36.2) 1,040 (40.9) 510 (1,120) 0.70 (0.92) 0.60 (0.78) 990 (39.0) 1,110 (43.7) 600 (1,320) 0.76 (0.99) 0.65 (0.85) 1,060 (41.7) 1,180 (46.5) 620 (1,370) 0.89 (1.16) 0.77 (1.01) 1,220 (48.0) 1,340 (52.8) 610 (1,340) (1.37) 0.90 (1.18) 1,400 (55.1) 1,520 (59.8) 680 (1,500) (0.90) 0.62 (0.81) 990 (39.0) (1,590) 0.75 (0.98) 0.65 (0.85) 1,820 (71.7) (1,190) rm Heavy duty bucket itching bucket : pplicable for materials with density of 2,000 kg/m 3 (3,370 lb/yd 3 ) or less : pplicable for materials with density of 1,600 kg/m 3 (2,700 lb/yd 3 ) or less : pplicable for materials with density of 1,100 kg/m 3 (1,850 lb/yd 3 ) or less TTHMNT ooms and arms are welded with a low-stress, full-box section design. 5.1 m (16 9 ) Mono-boom and 5.1 m (16 9 ) 2-Piece boom and 2.20 m ; 2.60 m & 3.1 m (10 2 ) rms are available. IGGING OR rm ength Weight mm (ft.in) 3,100 (10 2 ) kg (lb) 750 (1,560) 810 (1,790) 890 (1,960) Remarks: kn [117.2] [117.2] [117.2] ucket digging force rm crowd force S ISO S ISO kgf 11,000 [11,940] 11,000 [11,940] 11,000 [11,940] lbf 24,250 [26,330] 24,250 [26,330] 24,250 [26,330] kn [134.2] [134.2] [134.2] kgf 1 [13,680] 1 [13,680] 1 [13,680] lbf 27,780 [30,160] 27,780 [30,160] 27,780 [30,160] kn 87.2 [94.7] 77.3 [83.9] 69.0 [74.9] kgf 8,890 [9,650] 7,880 [8,560] 7,030 [7,630] lbf 19,600 [21,280] 17,370 [18,860] 15,500 [16,830] kn 91.0 [98.8] 80.3 [87.2] 71.4 [77.5] kgf 9,280 [10,080] 8,190 [8,890] 7,280 [7,900] [ ]: Power oost lbf 20,460 [22,210] 18,060 [19,600] 16,050 [17,430] Note : rm weight includes bucket cylinder, linkage and pin 2

3 IMNSIONS & WORING RNG HX180 MONO-OOM IMNSIONS 5.1 m (16 9 ) Mono-boom and 2.2 m ; 2.6 m & 3.1 m (10 2 ) rm. ( ) I G H M Tumbler distance 3,360 (11 0 ) Overall length of crawler 4,116 (13 6 ) clearance of counterweight 1,055 (3 6 ) Tail swing radius 2,480 (8 2 ) Rear-end length 2,480 (8 2 ) Overall width of upperstructure 2,475 (8 1 ) Overall of cab 2,980 (9 9 ) G Min. ground clearance 460 (1 6 ) H Track gauge 2,250 (7 5 ) I Overall of guardrail 3,235 (10 7 ) M oom length rm length Overall length Overall of boom Track shoe width Overall width 8,660 (28 5 ) 3,010 (9 11 ) 500 (20 ) 2,750 (9 0 ) 600 (24 ) 2,850 (9 4 ) 5,100 (16 9 ) 8,650 (28 5 ) 2,990 (9 10 ) 700 (28 ) 2,950 (9 8 ) 3,100 (10 2 ) 8,650 (28 5 ) 3,150 (10 4 ) 800 (32 ) 3,050 (10 0 ) HX180 MONO-OOM WORING RNG oom length rm length 5,100 (16 9 ) 3,100 (10 2 ) reach 8,690 (28 6 ) 9,020 (29 7 ) 9,450 (31 0 ) reach on ground depth depth (8 level) 8,530 (27 12 ) 5,660 (18 7 ) 5,430 (17 10 ) 8,860 (29 1 ) 6,060 (19 11 ) 5,850 (19 2 ) 9,300 (30 6 ) 6,560 (21 6 ) 6,370 (20 11 ) Max. vertical wall digging depth 5,120 (16 10 ) 5,380 (17 8 ) 5,710 (18 9 ) 8,750 (28 8 ) 8,840 (29 0 ) 8,980 (29 6 ) Max. dumping 6,110 (20 1 ) 6,220 (20 5 ) 6,390 (21 0 ) Min. front swing radius 3,180 3,170 3,170 3

4 IMNSIONS & WORING RNG HX180 2-PI OOM IMNSIONS 5.1 m (16 9 ) 2-piece boom and 2.2 m ; 2.6 m rm. ( ) I G H M Tumbler distance 3,360 (11 0 ) Overall length of crawler 4,116 (13 6 ) clearance of counterweight 1,055 (3 6 ) Tail swing radius 2,480 (8 2 ) Rear-end length 2,480 (8 2 ) Overall width of upperstructure 2,475 (8 1 ) Overall of cab 2,980 (9 9 ) G Min. ground clearance 460 (1 6 ) H Track gauge 2,000 (6 7 ) I Overall of guardrail 3,235 (10 7 ) M oom length rm length Overall length Overall of boom Track shoe width Overall width 500 (20 ) 2,750 (9 0 ) 8,610 (28 3 ) 3,040 (9 12 ) 600 (24 ) 2,850 (9 4 ) 5,100 (16 9 ) 700 (28 ) 2,950 (9 8 ) 8,610 (28 3 ) 3,060 (10 0 ) 800 (32 ) 3,050 (10 0 ) HX180 2-PI OOM WORING RNG oom length rm length 5,100 (16 9 ) 2-piece boom reach 8,690 (28 6 ) 9,110 (29 11 ) reach on ground depth depth (8 level) 8,530 (27 12 ) 5,660 (18 7 ) 5,430 (17 10 ) 8,950 (29 4 ) 5,830 (19 2 ) 5,730 (18 10 ) Max. vertical wall digging depth 5,120 (16 10 ) 4,980 (16 4 ) 8,750 (28 8 ) 9,610 (31 6 ) Max. dumping 6,110 (20 10 ) 6,910 (22 8 ) Min. front swing radius 3,180 2,970 (9 9 ) 4

5 IMNSIONS & WORING RNG HX180 MONO-OOM IMNSIONS 5.1 m (16 9 ) Mono-boom and 2.2 m ; 2.6 m & 3.1 m (10 2 ) rm. ( ) P O M N G H I Tumbler distance 3,360 (11 0 ) Overall length of crawler 4,116 (13 6 ) clearance of counterweight 1,055 (3 6 ) Tail swing radius 2,480 (8 2 ) Rear-end length 2,480 (8 2 ) Overall width of upperstructure 2,475 (8 1 ) Overall of cab 2,980 (9 9 ) G Min. ground clearance 460 (1 6 ) H Track gauge 2,250 (7 5 ) M clearance of ozer blade up 615 (2 0 ) N epth of dozer blade down 675 (2 3 ) O Height of dozer blade 640 (2 1 ) P Overall of guardrail 3,235 (10 7 ) I oom length rm length Overall length Overall of boom Track shoe width Overall width 9,110 (29 11 ) 3,010 (9 11 ) 500 (20 ) 2,750 (9 1 ) 600 (24 ) 2,850 (9 5 ) 5,100 (16 9 ) 9,100 (29 10 ) 2,990 (9 10 ) 700 (28 ) 2,950 (9 9 ) 3,100 (10 2 ) 9,100 (29 10 ) 3,150 (10 4 ) 800 (32 ) 3,050 (10 1 ) HX180 MONO-OOM WORING RNG oom length rm length 5,100 (16 9 ) 3,100 (10 2 ) reach 8,690 (28 6 ) 9,020 (29 7 ) 9,450 (31 0 ) reach on ground depth depth (8 level) 8,530 (27 12 ) 5,660 (18 7 ) 5,430 (17 10 ) 8,860 (29 1 ) 6,060 (19 11 ) 5,850 (19 2 ) 9,300 (30 6 ) 6,560 (21 6 ) 6,370 (20 11 ) Max. vertical wall digging depth 5,120 (16 10 ) 5,380 (17 8 ) 5,710 (18 9 ) 8,750 (28 8 ) 8,840 (29 0 ) 8,980 (29 6 ) Max. dumping 6,110 (20 1 ) 6,220 (20 5 ) 6,390 (21 0 ) Min. front swing radius 3,180 3,170 3,170 5

6 IMNSIONS & WORING RNG HX180 N MONO-OOM IMNSIONS 5.1 m (16 9 ) Mono-boom and 2.2 m ; 2.6 m rm. ( ) I G H M Tumbler distance 3,360 (11 0 ) Overall length of crawler 4,116 (13 6 ) clearance of counterweight 1,055 (3 6 ) Tail swing radius 2,480 (8 2 ) Rear-end length 2,480 (8 2 ) Overall width of upperstructure 2,475 (8 1 ) Overall of cab 2,980 (9 9 ) G Min. ground clearance 460 (1 6 ) H Track gauge 2,250 (7 5 ) I Overall of guardrail 3,235 (10 7 ) M oom length rm length Overall length Overall of boom Track shoe width Overall width 8,660 (28 5 ) 3,010 (9 11 ) 500 (20 ) 2,500 (8 2 ) 5,100 (16 9 ) 8,650 (28 5 ) 2,990 (9 10 ) 600 (24 ) 3,100 (10 2 ) 8,650 (28 5 ) 3,150 (10 4 ) 700 (28 ) 2,700 (8 8 ) HX180 N MONO-OOM WORING RNG oom length rm length 5,100 (16 9 ) 3,100 (10 2 ) reach 8,690 (28 6 ) 9,020 (29 7 ) 9,450 (31 0 ) reach on ground depth depth (8 level) 8,530 (27 12 ) 5,660 (18 7 ) 5,430 (17 10 ) 8,860 (29 1 ) 6,060 (19 11 ) 5,850 (19 2 ) 9,300 (30 6 ) 6,560 (21 6 ) 6,370 (20 11 ) Max. vertical wall digging depth 5,120 (16 10 ) 5,380 (17 8 ) 5,710 (18 9 ) 8,750 (28 8 ) 8,840 (29 0 ) 8,980 (29 6 ) Max. dumping 6,110 (20 1 ) 6,220 (20 5 ) 6,390 (21 0 ) Min. front swing radius 3,180 3,170 3,170 6

7 ITING PITY HX180 MONO-OOM oom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m kg *3700 * (25 ft) lb *8160 *8160 (18.4) 6.0 m kg * (20 ft) lb * (22.9) 4.5 m kg *4530 *4530 * * (15 ft) lb *9990 *9990 * * (25.5) 3.0m kg *9050 *9050 * * (10 ft) lb *19950 *19950 * * (26.7) 1.5 m kg * * (5 ft) lb * * (26.9) kg *7160 *7160 * lb *15790 *15790 * (26.0) -1.5 m kg *7070 *7070 * * * (-5 ft) lb *15590 *15590 * * * (24.0) -3.0 m kg *11260 *11260 *9570 *9570 * * (-10 ft) lb *24820 *24820 *21100 *21100 * * (20.3) -4.5 m kg *6220 *6220 (-15 ft) lb *13710 *13710 oom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 7.5 m kg *3340 * (25 ft) lb *7360 *7360 (20.0) 6.0 m kg *2990 *2990 * (20 ft) lb *6590 *6590 * (24.2) 4.5 m kg *3720 *3720 * (15 ft) lb *8200 *8200 * (26.6) 3.0m kg *7870 *7870 *5270 *5270 * * (10 ft) lb *17350 *17350 *11620 *11620 * * (27.8) 1.5 m kg *8160 *8160 * * * (5 ft) lb *17990 *17990 * * * (28.0) kg *7950 *7950 * * lb *17530 *17530 * * (27.2) -1.5 m kg *6750 *6750 * * (-5 ft) lb *14880 *14880 * * (25.2) -3.0 m kg *10030 *10030 * * * * (-10 ft) lb *22110 *22110 * * * * (21.8) -4.5 m kg *7420 *7420 *4910 *4910 (-15 ft) lb *16360 *16360 *10820 *10820 oom: 5.1 m (16 9 ) / rm: 3.1 m (11 1 ) / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 7.5 m kg *2960 * (25 ft) lb *6530 *6530 (22.1) 6.0 m kg *2830 *2830 * (20 ft) lb *6240 *6240 * (25.9) 4.5 m kg *3310 *3310 *2090 *2090 * (15 ft) lb *7300 *7300 *4610 *4610 * (28.1) 3.0m kg *4660 *4660 * * (10 ft) lb *10270 *10270 * * (29.2) 1.5 m kg *10170 *10170 * * (5 ft) lb *22420 *22420 * * (29.4) kg *8710 *8710 * * lb *19200 *19200 * * (28.6) -1.5 m kg *6350 *6350 * * * (-5 ft) lb *14000 *14000 * * * (26.8) -3.0 m kg *8990 *8990 * * * * (-10 ft) lb *19820 *19820 * * * * (23.7) -4.5 m kg *12470 *12470 *8590 *8590 * *3320 * (-15 ft) lb *27490 *27490 *18940 *18940 * *7320 *7320 (18.3) 1. ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 7

8 ITING PITY HX180 2-PI OOM 2-piece boom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 6.0 m kg * (20 ft) lb * (23.2) 4.5 m kg * * (15 ft) lb * * (25.7) 3.0m kg * * (10 ft) lb * * (26.9) 1.5 m kg * * * (5 ft) lb * * * (27.1) kg *6260 *6260 * lb *13800 *13800 * (26.3) -1.5 m kg *6250 *6250 * * * * (-5 ft) lb *13780 *13780 * * * * (24.2) -3.0 m kg *9080 *9080 * * (-10 ft) lb *20020 *20020 * * (20.6) 2-piece boom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 6.0 m kg * (20 ft) lb * (24.5) 4.5 m kg * (15 ft) lb * (26.9) 3.0m kg * * (10 ft) lb * * (28.1) 1.5 m kg *7050 *7050 * * (5 ft) lb *15540 *15540 * * (28.3) kg *7110 *7110 * * lb *15670 *15670 * * (27.5) -1.5 m kg *6090 *6090 * * * (-5 ft) lb *13430 *13430 * * * (25.5) -3.0 m kg *9550 *9550 *9790 *9790 * * * (-10 ft) lb *21050 *21050 *21580 *21580 * * * (22.2) -4.5 m kg *6770 *6770 *4500 *4500 (-15 ft) lb *14930 *14930 *9920 * ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 8

9 ITING PITY HX180 N MONO-OOM oom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m kg *3700 * (25 ft) lb *8160 *8160 (18.4) 6.0 m kg * (20 ft) lb * (22.9) 4.5 m kg *4530 *4530 * * (15 ft) lb *9990 *9990 * * (25.5) 3.0m kg *9050 *9050 * * (10 ft) lb *19950 *19950 * * (26.7) 1.5 m kg * * (5 ft) lb * * (26.9) kg *7160 *7160 * lb *15790 *15790 * (26.0) -1.5 m kg *7070 *7070 * * * (-5 ft) lb *15590 *15590 * * * (24.0) -3.0 m kg *11260 *11260 * * * (-10 ft) lb *24820 *24820 * * * (20.3) -4.5 m kg *6220 *6220 (-15 ft) lb *13710 *13710 oom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 7.5 m kg * (25 ft) lb * (20.0) 6.0 m kg *2990 *2990 * (20 ft) lb *6590 *6590 * (24.2) 4.5 m kg * * (15 ft) lb * * (26.6) 3.0m kg *7870 *7870 * * * (10 ft) lb *17350 *17350 * * * (27.8) 1.5 m kg *8160 *8160 * * * (5 ft) lb *17990 *17990 * * * (28.0) kg *7950 *7950 * * lb *17530 *17530 * * (27.2) -1.5 m kg *6750 *6750 * * (-5 ft) lb *14880 *14880 * * (25.2) -3.0 m kg *10030 *10030 * * * * (-10 ft) lb *22110 *22110 * * * * (21.8) -4.5 m kg *7420 *7420 * (-15 ft) lb *16360 *16360 * oom: 5.1 m (16 9 ) / rm: 3.1 m (11 1 ) / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 7.5 m kg * (25 ft) lb * (22.1) 6.0 m kg *2830 *2830 * (20 ft) lb *6240 *6240 * (25.9) 4.5 m kg *3310 *3310 *2190 *2090 * (15 ft) lb *7300 *7300 *4610 *4610 * (28.1) 3.0m kg *4660 *4660 * * (10 ft) lb *10270 *10270 * * (29.2) 1.5 m kg * * * (5 ft) lb * * * (29.4) kg * * * lb * * * (28.6) -1.5 m kg *6350 *6350 * * * (-5 ft) lb *14000 *14000 * * * (26.8) -3.0 m kg *8990 *8990 * * * * (-10 ft) lb *19820 *19820 * * * * (23.7) -4.5 m kg *12470 *12470 * * * (-15 ft) lb *27490 *27490 * * * (18.3) 1. ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 9

10 ITING PITY HX180 N 2-PI OOM 2-piece boom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 6.0 m kg * (20 ft) lb * (23.2) 4.5 m kg * * (15 ft) lb * * (25.7) 3.0m kg * * (10 ft) lb * * (26.9) 1.5 m kg * * * (5 ft) lb * * * (27.1) kg *6260 *6260 * lb *13800 *13800 * (26.3) -1.5 m kg *6250 *6250 * * * (-5 ft) lb *13780 *13780 * * * (24.2) -3.0 m kg * * * (-10 ft) lb * * * (20.6) -4.5 m kg *7420 *7420 *4910 *4910 (-15 ft) lb *16360 *16360 *10820 * piece boom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. 6.0 m kg * (20 ft) lb * (24.5) 4.5 m kg * (15 ft) lb * (26.9) 3.0m kg * * (10 ft) lb * * (28.1) 1.5 m kg *7050 *7050 * * (5 ft) lb *15540 *15540 * * (28.3) kg *7110 *7110 * * lb *15670 *15670 * * (27.5) -1.5 m kg *6090 *6090 * * * (-5 ft) lb *13430 *13430 * * * (25.5) -3.0 m kg *9550 *9550 * * * * (-10 ft) lb *21050 *21050 * * * * (22.2) -4.5 m kg *6770 *6770 * (-15 ft) lb *14930 *14930 * ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 10

11 ITING PITY HX180 MONO-OOM oom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer up 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m kg *3700 * (25 ft) lb *8160 *8160 (18.4) 6.0 m kg * (20 ft) lb * (22.9) 4.5 m kg *4530 *4530 * * (15 ft) lb *9990 *9990 * * (25.5) 3.0m kg *9050 *9050 *5750 *5750 * * (10 ft) lb *19950 *19950 *12680 *12680 * * (26.7) 1.5 m kg * * (5 ft) lb * * (26.9) kg *7160 *7160 * * * lb *15790 *15790 * * * (26.0) -1.5 m kg *7070 *7070 * * * * (-5 ft) lb *15590 *15590 * * * * (24.0) -3.0 m kg *11260 *11260 *9570 *9570 * * (-10 ft) lb *24820 *24820 *21100 *21100 * * (20.3) -4.5 m kg *6220 *6220 (-15 ft) lb *13710 * m kg *17990 *17990 *13070 *13070 *7190 * (-15 ft) lb *39660 *39660 *28810 *28810 *15850 *15850 (20.5) oom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer down 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m kg *3700 * (25 ft) lb *8160 *8160 (18.4) 6.0 m kg * (20 ft) lb * (22.9) 4.5 m kg *4530 *4530 *4070 *4070 * (15 ft) lb *9990 *9990 *8970 *8970 * (25.5) 3.0m kg *9060 *9060 *5750 *5750 * * (10 ft) lb *19970 *19970 *12680 *12680 * * (26.7) 1.5 m kg * * * (5 ft) lb * * * (26.9) kg *7160 *7160 * * * lb *15790 *15790 * * * (26.0) -1.5 m kg *7070 *7070 * * * * (-5 ft) lb *15590 *15590 * * * * (24.0) -3.0 m kg *11260 *11260 *9580 *9580 * * (-10 ft) lb *24820 *24820 *21120 *21120 * * (20.3) -4.5 m kg *6230 *6230 (-15 ft) lb *13730 *13730 oom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer up 7.5 m kg *3340 * (25 ft) lb *7360 *7360 (20.0) 6.0 m kg *2990 *2990 * (20 ft) lb *6590 *6590 * (24.2) 4.5 m kg *3720 *3720 * (15 ft) lb *8200 *8200 * (26.6) 3.0m kg *7870 *7870 *5270 *5270 * * * (10 ft) lb *17350 *17350 *11620 *11620 * * * (27.8) 1.5 m kg *8160 *8160 * * * (5 ft) lb *17990 *17990 * * * (28.0) kg *7950 *7950 * * * lb *17530 *17530 * * * (27.2) -1.5 m kg *6750 *6750 * * * * (-5 ft) lb *14880 *14880 * * * * (25.2) -3.0 m kg *10030 *10030 *10220 *10220 * * * (-10 ft) lb *22110 *22110 *22530 *22530 * * * (21.8) -4.5 m kg *7420 *7420 *4910 *4910 (-15 ft) lb *16360 *16360 *10820 *

12 ITING PITY HX180 MONO-OOM oom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer down 7.5 m kg *3340 * (25 ft) lb *7360 *7360 (20.0) 6.0 m kg *2990 *2990 * (20 ft) lb *6590 *6590 * (24.2) 4.5 m kg *3720 *3720 * (15 ft) lb *8200 *8200 * (26.6) 3.0m kg *7870 *7870 *5270 *5270 * * * (10 ft) lb *17350 *17350 *11620 *11620 * * * (27.8) 1.5 m kg *8160 *8160 * * * * (5 ft) lb *17990 *17990 * * * * (28.0) kg *7950 *7950 * * * * lb *17530 *17530 * * * * (27.2) -1.5 m kg *6750 *6750 *10730 *10730 * * * (-5 ft) lb *14880 *14880 *23660 *23660 * * * (25.2) -3.0 m kg *10030 *10030 *10220 *10220 * * * (-10 ft) lb *22110 *22110 *22530 *22530 * * * (21.8) -4.5 m kg *7420 *7420 *4910 *4910 (-15 ft) lb *16360 *16360 *10820 *10820 oom: 5.1 m (16 9 ) / rm: 3.1 m (11 1 ) / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer up 7.5 m kg *2960 * (25 ft) lb *6530 *6530 (22.1) 6.0 m kg *2830 *2830 * (20 ft) lb *6240 *6240 * (25.9) 4.5 m kg *3310 *3310 *2090 *2090 * (15 ft) lb *7300 *7300 *4610 *4610 * (28.1) 3.0m kg *4660 *4660 * * * (10 ft) lb *10270 *10270 * * * (29.2) 1.5 m kg *10170 *10170 * * * (5 ft) lb *22420 *22420 * * * (29.4) kg *8710 *8710 * * * lb *19200 *19200 * * * (28.6) -1.5 m kg *6350 *6350 * * * * * (-5 ft) lb *14000 *14000 * * * * * (26.8) -3.0 m kg *8990 *8990 * * * * (-10 ft) lb *19820 *19820 * * * * (23.7) -4.5 m kg *12470 *12470 *8590 *8590 * *3320 * (-15 ft) lb *27490 *27490 *18940 *18940 * *7320 *7320 (18.3) oom: 5.1 m (16 9 ) / rm: 3.1 m (11 1 ) / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer down 7.5 m kg *2960 * (25 ft) lb *6530 *6530 (22.1) 6.0 m kg 2830 *2830 * (20 ft) lb *6240 *6240 * (25.9) 4.5 m kg *3310 *3310 *2090 *2090 * (15 ft) lb *7300 *7300 *4610 *4610 * (28.1) 3.0m kg *4660 *4660 *3880 *3880 * * (10 ft) lb *10270 *10270 *8550 *8550 * * (29.2) 1.5 m kg *10170 *10170 * * * * (5 ft) lb *22420 *22420 * * * * (29.4) kg *8710 *8710 * * * * lb *19200 *19200 * * * * (28.6) -1.5 m kg *6350 *6350 *10370 *10370 * * * * (-5 ft) lb *14000 *14000 *22860 *22860 * * * * (26.8) -3.0 m kg *8990 *8990 *10850 *10850 * * * (-10 ft) lb *19820 *19820 *23920 *23920 * * * (23.7) -4.5 m kg *12470 *12470 *8590 *8590 * *3320 * (-15 ft) lb *27490 *27490 *18940 *18940 * *7320 *7320 (18.3) 1. ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 12

13 ITING PITY HX180 N 2-PI OOM oom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer up 6.0 m kg * (20 ft) lb * (23.2) 4.5 m kg * * (15 ft) lb * * (25.5) 3.0m kg *5800 *5800 * * (10 ft) lb *12790 *12790 * * (26.9) 1.5 m kg * * * * (5 ft) lb * * * * (27.1) kg *6260 *6260 * * * lb *13800 *13800 * * * (26.3) -1.5 m kg *6250 *6250 * * * * (-5 ft) lb *13780 *13780 * * * * (24.2) -3.0 m kg *9080 *9080 * *3240 * (-10 ft) lb *20020 *20020 * *7140 *7140 (20.6) oom: 5.1 m (16 9 ) / rm: 2.2 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer down 6.0 m kg * (20 ft) lb * (23.2) 4.5 m kg *4110 *4110 * (15 ft) lb *9060 *9060 * (25.7) 3.0m kg *5800 *5800 * * (10 ft) lb *12790 *12790 * * (26.9) 1.5 m kg * * * * (5 ft) lb * * * * (27.1) kg *6260 *6260 * * * lb *13800 *13800 * * * (26.3) -1.5 m kg *6250 *6250 *10390 *10390 * * * (-5 ft) lb *13780 *13780 *22910 *22910 * * * (24.2) -3.0 m kg *9080 *9080 * *3240 * (-10 ft) lb *20020 *20020 * *7140 *7140 (20.6) -4.5 m kg *6770 *6770 * (-15 ft) lb *14930 *14930 * ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 13

14 ITING PITY HX180 N 2-PI OOM oom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer up 6.0 m kg * (20 ft) lb * (24.5) 4.5 m kg * (15 ft) lb * (26.9) 3.0m kg * * * (10 ft) lb * * * (28.1) 1.5 m kg *7050 *7050 * * * (5 ft) lb *15540 *15540 * * * (28.3) kg *7110 *7110 * * * * lb *15670 *15670 * * * * (27.5) -1.5 m kg *6090 *6090 *10020 *10020 * * * (-5 ft) lb *13430 *13430 *22090 *22090 * * * (25.5) -3.0 m kg *9550 *9550 *9790 *9790 * * * (-10 ft) lb *21050 *21050 *21580 *21580 * * * (22.2) -4.5 m kg *6770 *6770 *4500 *4500 (-15 ft) lb *14930 *14930 *9920 *9920 oom: 5.1 m (16 9 ) / rm: 2.6 m / ucket: 0.76 m 3 (0.92 yd 3 ) S heaped / Shoe: 600 mm (24 ) triple grouser. ozer down 6.0 m kg * (20 ft) lb * (24.5) 4.5 m kg * (15 ft) lb * (26.9) 3.0m kg * * * (10 ft) lb * * * (28.1) 1.5 m kg *7050 *7050 * * * * (5 ft) lb *15540 *15540 * * * * (28.3) kg *7110 *7110 * * * * lb *15670 *15670 * * * * (27.5) -1.5 m kg *6090 *6090 *10020 *10020 * * * (-5 ft) lb *13430 *13430 *22090 *22090 * * * (25.5) -3.0 m kg *9550 *9550 *9790 *9790 * * * (-10 ft) lb *21050 *21050 *21580 *21580 * * * (22.2) -4.5 m kg *6770 *6770 *4500 *4500 (-15 ft) lb *14930 *14930 *9920 * ifting capacity are based on S 1097 and ISO ifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 14

15 NGIN Perkins 1204 ngine HYRUI SYSTM Intelligent Power ontrol (IP) 3-power mode, 2-work mode, user mode Variable Power ontrol Pump low ontrol ttachment Mode low ontrol ngine uto Idle ngine uto Shutdown ontrol lectronic an ontrol IN & INTRIOR ISO Standard cabin Rise-up type windshield wiper Radio / US player Handsfree mobile phone system with US 12 volt power outlet (24V to 12V converter) lectric horn ll-weather steel cab with 360 visibility Safety glass windows Sliding fold-in front window Sliding side window (H) ockable door Hot & cool box Storage compartment & shtray Transparent cabin roof-cover Sun visor oor and cab locks, one key Mechanical suspension seat with heater Pilot-operated slidable joystick onsole box adjust system utomatic climate control ir conditioner & heater efroster Starting id (air grid heater) for cold weather entralized monitoring 8 display ngine speed or Trip meter/ccel. ngine coolant temperature gauge Max power ow speed/high speed uto idle Overload heck ngine ir cleaner clogging Indicators O Gauges uel level gauge Hyd. oil temperature gauge uel warmer Warnings ommunication error ow battery lock abin lights abin front window rain guard abin roof-steel cover Seat djustable air suspension seat with heater abin OPS/OG (ISO/IS 10262) evel 2 OPS (alling Object Protective Structure) ISO 3449 evel 2 OG (alling Object Guard) abin ROPS (ISO ) ROPS (Roll Over Protective Structure) ST OPT STY attery master switch Rearview camera VM (dvanced round View Monitoring) our front working lights Travel alarm Rear work lamp eacon lamp utomatic swing brake oom holding system rm holding system Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Swing ock System Three outside rearview mirrors OTHR ooms 5.1 m; m; piece boom rms 2.2 m; m; m; 10 2 Removable clean-out dust net for cooler Removable reservoir tank uel pre-filter Self-diagnostics system Hi-mate (Remote Management System) atteries (2 12 V 100 h) uel filler pump (50 l/min) Single-acting piping kit (breaker, etc.) ouble-acting piping kit (clamshell, etc.) Rotating Piping it Quick coupler piping Quick coupler oom floating control ccumulator for lowering work equipment Pattern change valve (2 patterns) ine Swing ontrol System Tool kit UNRRRIG ower frame under cover (dditional) ower frame under cover (Normal) uldozerinis peilis Track shoes Triple grouser shoes (500 mm; 20 ) Triple grouser shoes (600 mm; 24 ) Triple grouser shoes (700 mm; 28 ) Triple grouser shoes (800 mm; 32 ) Track rail guard ST = Standard OPT = Optional ST OPT * Standard and optional equipment may vary. ontact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * ll imperial measurements rounded off to the nearest pound or inch. PS ONTT N Rev 0